How to create a deletion transport request without deleting the object.

Hi Experts,
I got a very strange requirement in which i want to delete a object from QA envirement. One way to delete it is delete the object in developement and save it in a transport request. And transport that request to QA.
But can't delete the object from Dev environment. So is there any other way by which i can do this.
Thanks
Yogesh Gupta

Hi,
You need not worry about deleting the objects in QA now.
Have the set of objects which you will not be tranporting to PROD.
After your project is live and during support before handholding to the customer, clean your system DEV,QUA.
Reward Points if Useful.
Thanks,
Anita

Similar Messages

  • How to see who deleted the Object

    Hi Gurus
    Would you please advise if some data target or transformation is deleted from the BW system how to know who deleted the objects?
    Thanks

    How to see who deleted the Object

  • How to create Mavericks usb install disk without knowing the admin password

    How can I create a Mavericks usb for a fresh install without knowing the admin password. (lost password)

    Tearjerker wrote:
    You dont need to have the installer on a USB stick!
    I would agree with you if there was always an Internet connection available and the the Apple Servers were always in operation.  In those instances when this is not the case, a USB installation drive is good to have.  I speak from experience. 
    Ciao.

  • How can i create a new transport request?

    Dear Experts,
    Some colleagues have to modify a master record, but save time, failing to produce a request no., then, how can i create a new transport request?
    Wilson

    Hi,
    Please let us know about the issue when you create the new Transport request .
    In which system you are creating the request . Hope its in Development  .
    If so , check the entries are enabled in SCC4 > Changes without automatic recording
    Changes to repository objects and cross client customizing allowed .
    Protection level 0
    If these entries are enabled, you must be able to create Transport requests.
    Please check and update .
    Regards,
    Nibu

  • How could we delete transport request and task(the released one)

    Hello
    We have a released transport task(not request). Transport request is not released.
    How could we delete transport request and task(the released one). Namely we would not like to transport it to production

    Hi, never delete directly in table.
    There are more tables which depends each other...
    Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
    Using program: RDDIT076 and changing status.

  • How to create a New Tranport Request for changed  Extract structure

    How to create a New Tranport Request for changed  Extract structure ?
    Hi Experts,
    I have a FI AP Generic Datasource containing extract structure with appended fields.
    It has already been activated and transported to Testing System.
    Now, I am to create a new transport request for this DataSource and Extract structure.
    I do not want to delete and recreate the Generic Datasource.
    I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
    Please let me know the steps
    URGENT

    Hi Dev,
    Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
    Hope it helps...

  • I want to know how to change schedule on Transport Requests

    Hi.
    I want to know how to change schedule Transport Requests.
    And the Transport requests has already approved by Transport Proposals.
    Now I tried to change schedule after re-creat Transport Request,it is same
    Transport Request Number.
    But I can't change schedule.
    Please help me!
    Thanks.
    Toshi

    In full editor, Image>Resize>image size. Be sure to check "Resample Image & Constrain proportions".
    You can also do it with the crop tool. On the tool's option bar, enter the resolution in the appropriate box.

  • How do I AUTOMATICALLY generate Transport request for a Z table data?

    Hello friends,
    I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
    Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
    So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
    Any ideas?
    Your help is greatly appreciated.

    You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
    In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
    Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
    Also change the "delivery class' in the table attributes to 'C' - Customizing table

  • Create a new transport request for note 898614

    Hello,
    I want to set up the service desk function in the solution manager 4.0.
    In the IMG I'm pointed to note 898614. Here the settings are described but not clear anough for me.
    Here are the first two steps:
    1) In transaction SCPR20, activate the following BC set:
    SOLMAN40_SDESK_BASICFUNC_000. Activate this in expert mode with the option "Overwrite everythng".
    2) Create a new transport request (transaction SE09) in the source client (000) of your Solution Manager system. Unpack the file Piecelist_Service_Desk_Init.zip from the attachment to this note. Copy the contents of the file Piecelist_Service_Desk_Initial.txt to the transport request. Use transaction SCC1 to import the transport
    request to your Solution Manager client.
    Unpack the BC sets contained in the file SOLMAN40_SDESK_SP04.ZIP.
    In transaction SCPR20, activate the BC sets. The BC sets contain additional actions.
    Activation must take place in expert mode using the option "Overwrite everythng".
    Then, implement Note 931196 if necessary.
    My question is how do I create a new transport request and how do I import the file Piecelist_Service_Desk_Initial.txt in to this request.?
    If I press the button create in tr-se09 I could choose between 6 differend transports. Which wan do I have to choose?
    And how to import the Piecelist_Service_Desk_Initial.txt  file.
    Kind regards,
    Richard Meijn

    Hi,
    go to SE09 in Client 000 and create a transport request of type workbench. You may use copy&paste from piecelist text file to add objects to your transport request.
    Logon to your production client where you want to use Service Desk functionality and import that transport using transaction SCC1.
    /cheers

  • How to assign a new  transport request for  a program saved in $tmp mode

    Hi  all,
    How to assign a new  transport request for  a program saved in $tmp mode?

    Hi,
    delete the object fro the package $tmp.
    go to change mode, save it.
    while saving it will ask for teransport id.
    thanks
    vinod

  • How to create a substitute for requester in SRM 7.0

    Hi,
    do you know how to create a substitute for requester?
    we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
    Thanks.
    Regards,
    Nelson

    You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
    Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
    Edited by: Jay Yang on Mar 31, 2011 10:47 AM

  • Creating a new transport request.

    Dear SolMan users,
    Is it necessary to create a new transport request when a tester reject the testing so the developer must make some changes angain or can use the change request already created at the begining of creating changes in the system.
    Thank you
    Petr

    Hi,
    The developer will be creating a Transport Request in Development System.
    The tester will just check the functionlaities in Quality server. What is the use of a Tester creating a Transport Request? Any scenario you can explain?
    Regards,
    Rajesh Kumar

  • How to track the transport request number for the Role/Composit Role

    Hi,
    How to track the transport request number for the Role/Composit Role.
    Thanks,
    Ravi

    Use transaction SE03 Transport Organizer Tools
    Execute "Search for Objects in Requests/Tasks" with objects of types:
    R3TR     ACGR     Role
    R3TR     ACGT     Role - User assignment
    Regards

  • How to create iTune or App Store without credit card for my existing Apple ID without create new Apple ID or email?

    I got 2 Apple ID and the first time to I use it to iTune or App Store, a box will pop out and telling me this:
    "This Apple ID has not yet been used with the i Tunes Store. Please review your account information."
    Then, I click on the button, "Review". Bla bla... but ended up, I must provide a credit card in order to complete it.
    I do not have credit card, so I search 'How to create iTune or App Store without credit card', same link and same tactic only valid for New Apple ID.
    So, it seem no other option to create iTune or App Store without credit card for existing Apple ID, right?

    The same thing is happening to me!

  • HT2731 how to create a free apple id without puttin in the cridit card info?

    how to create a free apple id without puttin in the cridit card info?
    Card type "None" option is not available

    Welcome to the Apple Community.
    To be able to download free apps without a recognised method of payment or gift card.
    Open iTunes and navigate to the app store. Select a free app to download. A simple way to do this is to scroll down to the top free apps box on the right hand side, hover your mouse over the first item and click on the free button that appears when you hover over it.
    A pop up will open asking you to sign in with your Apple ID click "create new account", click continue to create your account. Check the box to accept the store terms and conditions and click continue.
    Enter your email address, password, security question, and date of birth, click continue. Now, you will be asked to provide a payment method. Note now that the last option says "none".

Maybe you are looking for