How to create a Desktop based reporting tool

Regarding the Rreporting tool . Here I am mentioning the key points of my requirement,
As a first step the user creates the table linking and Alias naming.
Need a GUI kind of reporting tool, Where the user can drag and drop the tables, In that he can build the relations among the tables (if any exists).. User should be given a provision to make alias names for tables and columns. Then saves his report
In the second step user can check his saved report and select the columns . Based on the selected columns a query should be populated automatically with all the selected columns and where clauses based on the links/joins with the user given alias names (if any). Based on this the report should be generated..
I know there are many reporting calls like BIRT,Pentao. But the thing is when I am working or developing on these tools its design is fixed and file gets generated. which can viewed in that editor only.. (like .reportdesign, .report, .rptcustom)
Here please tell me which tool to use and how to start with.
Here the tool can be a desktop application or a war file. (This complete thing should be a GUI based)
--> It should connect to a database and show the list of tables ( or set of tables which are already stored in DB)
--> based on table selection we should display columns of that table
--> if multiple tables are there we should show relations between tables ( if any exists)
( the relations will be already stored in back-end tables, just we need to check any relation exist or not)
--> User should be a given a option to provide alias naming for tables and columns
--> User should save the complete set as a report (with alias names also if any provided by user)
--> when once we save the report we should provide a option to run the report and display the result.

What have you coded so far?
If you are looking for someone to do it for you, then be aware: this is not a do my project for me service, but many of the people on here do consulting at 100+ USD per hour. Check one of your local services and I'm sure you can find a local deveoper to do your project for you.

Similar Messages

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

HOW TO CREATE A DFF BASED ON ORGANIZATION

Hi,
I want to create a DFF which would have 5 different context values, i want 2 of them to be available in one organization and other 3 in other organization, how i can achieve this.
Regards,
Usman.

Hello,
"HOW TO CREATE A DFF BASED ON ORGANIZATION"
1- I will create a customized table having two columns one is for context name and other is for org_id,
2- then i will create a value set on this table and will use this on 'Value Set' field on 'Descriptive Flexfield Segments' window.
3- In the where clause of this value set i will pass org_id from profile $PROFILES$.ORG_ID,
4- this will restrict the context based on org_id And user will only have context related to there org
I have successfully achieved the above requirment.
Find below the restriction you should follow so that Value set is available in LOVs on "Descriptive Flexfield Segments" window:
Value sets used for context fields must obey certain restrictions or they will not be available to use in the Value Set field in the Context Field region of the Descriptive
Flexfield Segments window:
• Format Type must be Character (Char)
• Numbers Only must not be checked (alphabetic characters are allowed)
• Uppercase Only must not be checked (mixed case is allowed)
• Right-justify and Zero-fill Numbers must not be checked
• Validation Type must be Independent or Table
If the validation type is Independent:
• the value set maximum size must be less than or equal to 30
If the validation type is Table:
• the ID Column must be defined, it must be Char or Varchar2 type, and its size must
be less than or equal to 30. The ID column corresponds to the context field value
code (the internal, non-translated context field value).
• the Value Column must be defined, it must be Char or Varchar2 type, and its size
must be less than or equal to 80. The Value column corresponds to the context field
value name (the displayed context field value).
• the value set maximum size must be less than or equal to 80
All context field values (the code values) you intend to use must exist in the value set. If
you define context field values in the Context Field Values block of the Descriptive
Flexfield Segments window that do not exist in the context field value set, they will be
ignored, even if you have defined context-sensitive segments for them.
Best Regards,
Usman.

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to create dynamic context based on a structure defined in the program?

Hi Experts,
         I need to create a dynamic context based on a structure wa_struc which i have define programatically.
When I pass wa_struc to structure_name parameter of create_nodeinfo_from_struc, i get a runtime error:
"Parameter STRUCTURE_NAME contains an invalid value wa_struc."
How to create dynamic context based on a structure defined in the program?
I have written the code like this:
TYPES: BEGIN OF t_type,
            v_carrid TYPE sflight-carrid,
            v_connid TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
         wa_struc type t_type.
data: dyn_node   type ref to if_wd_context_node.
data: rootnode_info   type ref to if_wd_context_node_info.
rootnode_info = wd_context->get_node_info( ).
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = 'dynflight'
structure_name = 'wa_struc'
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( name = 'dynflight' ).
dyn_node->bind_table( i_struc ).
Thanks
Gopal
Message was edited by: gopalkrishna baliga

Hi Michelle,
          First of all Special thanks for your informative answers to my other forum questions. I really appreciate your help.
Coming back to this question I am still waiting for an answer. Please help. Note that my structure is not in a dictionary.
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
I have updated my code like the following and I am getting error:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
But now I am getting the following error :
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
-Gopal
Message was edited by: gopalkrishna baliga

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create Remote Desktop Application in C# or port it from HTML5/JS project ?

Hi
How can create Remote Desktop Application in C# template ? I were searching on google but not found example or API for this.
If can, please suggest for me some solution, example and document.
And I have JavaScript project template Remote Desktop Application. Can i port it to c# ? Or use Webview to show it ?
I were create demo use webview to show it but it not run. Maybe i do some mistake or can't be do it.
Thanks.

I have no other options. We already provide the RDP plug-in for JavaScript. I'm not sure what else is needed for this.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with
undefined objects and unknown namespaces.
My project needs work with C# Windows Store. So I need RDP on C#, not JS. If we don't support C#, do we have a RDP spec on Windows 8.1 so that we can follow that spec to implement with native code to support RDP?

How to create user editable Crystal Report with dynamic dataset

What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.

The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

How to create an ODS based on a particular table

Can Anybody tell me how to create an ODS based on a particular table and what are the basic requirements for that

Hi Priya,
If my understanding is right, you want to create an ODS based on a database table.
Here, I will assume that you already know how to create an ODS. Otherwise, do let me know so that I can guide you on how to do it.
Basically, an ODS consists of two important sections i.e.
1. Key Fields
2. Data Fields
First, we must identify what are the field(s) in the table that make its records unique. You can think of this as database's primary key(s) e.g. Document Number. These field(s) must be inserted in ODS' Key Fields section. You can only insert Characteristics in Key Fields and the InfoObjects in this section will uniquely identify an ODS record or line item.
Next, you can include the rest of the fields (either Characteristics and Key Figures) in ODS' Data Fields and activate the ODS.
Having done that, you have already successfully create an ODS based on a database table.
Hope that helps.
Best wishes,
Syuhair.

How to Create add-on using B1DE tools

Hi,
How to create add-on using B1DE tools. if any documentation is there, send me or attached document.
Thanks,
P.Suresh Kumar

Hi,
Here is the link to find out the info about B1DE:
[Content Deleted]
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/a175fb62-0c01-0010-a8b5-fa58a13b1cf7 [original link is broken]
you may check them. Happy checking.
JimM
Message was edited by: Jason Lax

How to create radio button in reports

Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
Nagendra

Hi Nagendra,
    But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
             P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'P_RAD2'.
      SCREEN-INVISIBLE = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

How to create the PO based on requisition through interface.

Hi,
In P2P,
How to create the PO based on requisition through interface.
Regards,
Srikanth

Hi Srikanth,
I knew it from frontend.
But i want from backend using INTERFACE .please see if this can help you
http://appshub-hussy.blogspot.com/2010/10/requisition-and-purchase-order-queries.html
http://oraclemaniac.com/2012/04/17/sql-queries-to-get-requisition-po-and-po-receipt-details/
SQL to link Requisitions with Purchase Orders
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-find-the-po-number-if-we-give-requisition-number-3161211
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/need-requisition-sql-query-1338985
;) AppSmAstI ;)
sharing is CAring

How to create collection (query) based on report results?

Hello everyone,
I have the following report;
I would like to create a collection based on the "Non Compliant" and the "Unable to find compatible TPM" so I can re-deploy with right-click tools.
If the above is NOT the solution to create a group for redeployment. How would I address this?
Thank you in advance for any help.

Unfortunately, there is no straight-forward answer here. ConfigMgr console queries use WQL and only have visibility to a subset of the complete information in the database. Most things you are probably interested in creating queries from are probably visible,
but that's not guaranteed. Additionally, they are named slightly differently also so it really just takes some trial and error and personal investigation to see what is there and what isn't. The place to start is to open the root\sms\site_<sitecode>namespace
on the system hosting the SMS provider. The public reference for most of the classes is at
http://msdn.microsoft.com/en-us/library/hh948405.aspx . These all directly map to data in the database but as mentioned, not all views in the DB have a corresponding WMI class.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to create a BAPI based on R/3 report?

Hi,
I have a requirement to create a BAPI based on an R/3 report. the selection screen elements shold be the parameters that we pass to the BAPI and output of the report will be the output for the BAPI.
I have issue creating the bapi structure for select-options parameters of the report. suppose order type is defined as SELECT-OPTIONS: s_auart FOR vbak-auart. How this need to be converted into a BAPI structure? Please let me know if you have any questions.
Thank you,
Surya

Hi,
U can declare AU_LOW and AU_HIGH as two import paramters in BAPI.
and then u can add it to ranges in the source code by these import values.
So that u can pass the range of values.
Thanks and Regards,
Krishna Chaitanya G

How to create a dynamic RTF report which creates dynamic columns based on dynamic column selection from a table?

Hi All,
Suppose I have table, whose structure changes frequently on daily basis.
For eg. desc my_table gives you following column name on Day 1
SQL > desc my_table;
Output
Name
Age
Phone
On Day 2, two more columns are added, viz, Address and Salary.
SQL > desc my_table;
Output
Name
Age
Phone
Address
Salary
Now I want to create an Dynnamic RTF report which would fetch data from ALL columns from my_table on daily basis. For that I have defined a concurrent program with XML as output type and have attached a data template/data definition to it which takes in XML as input and gives final output of conc program in EXCEL layout. I am able to do this for constant number of columns, but dont know how to do it when the number of columns to be displayed changes dynamically.
For Day 1 my XML file should be like this.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
</group>
</dataStructure>
</dataTemplate>
And my Day 1, EXCEL output from RTF template should be like this.
Name     Age     Phone
Swapnill     23     12345
For Day 2 my XML file should be like this. With 2 new columns selected in SELECT clause.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
,Address
,Salary
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
<element name="Address" value="Address" />
<element name="Salary" value="Salary" />
</group>
</dataStructure>
</dataTemplate>
And my Day 2, EXCEL output from RTF template should be like this.
Name     Age     Phone     Address     Salary
Swapnill     23     12345         Madrid     100000
Now, I dont know below things.
Make the XML dynamic as in on Day 1 there must be 3 columns in the SELECT statement and on Day 2, 5 columns. I want to create one dynamic XML which should not be required to be changed if new columns are added in my_table. I dont know how to create this query and also create their corresponding elements below.
Make the RTF template dyanamic as in Day1 there must 3 columns in EXCEL output and on Day 2, 5 columns. I want to create a Dynamic RTF template which would show all the columns selected in Dynamic XML.I dont know how the RTF will create new XML tags and how it will know where to place it in the report. Means, I can create RTF template on Day 1, by loading XML data for 3 columns and placing 3 XML tags in template. But how will it create and place tags for new columns on Day 2?
Hope, you got my requirement, its a challenging one. Please let me know how I can implement the required solution using RTF dynamically without any manual intervention.
Regards,
Swapnil K.
Message was edited by: SwapnilK

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

How to create a Desktop based reporting tool

Similar Messages

Maybe you are looking for