How to create a DNS record for a domain itself (without a hostname)

Hi,
Normally, you can create a DNS record that points to the zone itself, e.g.:
@               10800 IN A    196.197.200.201
How do you accomplish that on a Mac OSX Lion Server? The DNS requires you to enter a hostname and it does not accept "@" as the hostname as it normally appears in the zone file.
(manually modifying the host file does not work - I tried that ;-) )
Any help is appreciated
Thanks
Bjoern Dirchsen

Create either a blank record with a ., or a FQDN such as 'domain.com.' (note the trailing dot). Either of these should map to the domain name.

Similar Messages

  • #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##

    Hi,
    This is my first post here. 
    My exchange server of late is facing a peculiar problem. I get the error message that I have posted below when sending mails to any outside domain. However when I restart the server the mails can be resend to the address without any issue. After a certain
    time again the issue pops up upon which I am forced to restart the server again. I am running 2007 Exchange on Windows 2003.
    Generating server: name.mydomain.com
    [email protected]
    #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
    [email protected]
    #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
    Original message headers:
    Received: from name.mydomain.com ([1xx.xxx.xxx.xx5]) by MHDMAILS.mouwasat.com
     ([1xx.xxx.xxx.xx5]) with mapi; Wed, 19 Oct 2011 08:56:29 +0300
    From:  <[email protected]>
    To: <[email protected]>
    CC: "Al Alami,Tareq" <[email protected]>
    Date: Wed, 19 Oct 2011 08:56:27 +0300
    Subject: RE:   
    Thread-Topic:   
    Thread-Index: AcyAQ5tu8z9CvBfdT5+1pcGQkk6x0AIuwczAAAGZjeABQyW5sAADeeJQAAETNDA=
    Message-ID: <[email protected]>
    References: <[email protected]com>
     <[email protected]com>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator:
    acceptlanguage: en-US
    Content-Type: multipart/related;
                boundary="_004_EEC8FA6B3B286A4E90D709FECDF51AA06C0588CA11namedomain_";
                type="multipart/alternative"
    MIME-Version: 1.0

    On Sun, 23 Oct 2011 15:05:15 +0000, Jobin Jacob wrote:
    >
    >
    >Even af
    >
    >ter removing my domain from the send connector I continue to receive the error. I would like to say I do have a firewall, Cyberoam. However, it was the same configuration till now in the firewall. I did try Mx lookup and found the following.
    >
    >Could there be any other solution to this issue ?
    Sure, but it's necessary to ask a lot of questions since none of us
    know how your organization is set up.
    I see you also have "Use the External DNS Lookup settings on the
    transport server" box checked. How have you configured the "External
    DNS Lookups" on the HT server's property page? Is there any good
    reason why you aren't just using your internal DNS servers? If the
    internal DNS servers are configured to resolve (or forward) queries
    for "external" domains then there's no reason to use that checkbox. In
    most cases checking that box is a mistake.
    http://technet.microsoft.com/en-us/library/aa997166(EXCHG.80).aspx
    The behavior you describe (it works for a while and then fails;
    restarting the server returns it to a working state) sure sounds like
    some sort of DNS problem.
    Rich Matheisen
    MCSE+I, Exchange MVP
    --- Rich Matheisen MCSE+I, Exchange MVP

  • Creating a DNS Record for a Host with Two or More IP???

    Can we create DNS A Record for a Host with Two or More IP ... ( we like to use my website  "mysite.com" pointing to two Ips )
    Please help...

    Sure, no worries.
    In a production environment DNS will query always the first record it will stores in cache, you need to find a dynamic or NLB way to achieve the automatic fail over else when you will have an outage with the first IP, then you need to ask your clients to
    clear the cache and register to DNS again, this i will not suggest in a production environment, lots of manual efforts and doesnt sound like a solution in a production environment, i would suggest you to explore windows NLB, it's easy to set and use the OS
    license.
    Thanks
    Inderjit

  • How to create STO Condition record for a condition Type ?

    I am doing config for STO.
    in MEK1 , it is asking for Vendor, but in my case I am doing STO by using delivery VL01 and receipt by MIGO.
    I want to know abt- How to create Condition Record for STO so that STO order will have Moving Average Price f Material.
    Sorry I m new to MM so pls help.

    Solved

  • Exchange sending email to Yahoo fails- #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##

    I have an Exchange 2010 server with SP3. It's otherwise running fine (as fine as Exchange is). We are in the midst of a migration to "hosted" Exchange (Office365).
    I'm suddenly getting this error sending MAPI to Yahoo. MXTools says Yahoo's MX records are fine.
    I ran th get-transport comandlet and get this message:
    ClearCategories : True
    ConuertDisclainerrIrapperToEnl : False
    DßNConuersionMode : UseExchangeflSNs
    ExternalDelayDsnEnabled : True
    ExternalflsnDefaultLanguage :
    ExternalDsnLanguageDetectionEnabled : True
    ExternalDsnMaxMessageAttachSize : 10 MB (10.485.760 bytes)
    ExternalDsnfleportingAuthority :
    ExternalDsnSendHtnl : True
    ExternalPostnasterAddress :
    CenerateCopyOfDSNFor : <5.4.8. 5.4.6. 5.4.4. 5.2.4. 5.2.0. 5_1_4)
    HygieneSuite : Standard
    InternalflelayflsnEnabled : True
    InternalDsnDefaultLanguage :
    InternalDsnLanguageDetectionEnabled : True
    InternalDsnMaxMessageAttachSize : 10 MU (10,405,760 bytes)
    InternalDsnReportingAuthority :
    InternalDsnSendHtnl : True
    InternalSMTPSeruers : <)
    JournalingfleportHdrTo : <>
    LegacyJournalingMigrationEnabled : False
    MaxDunpsterSizePerDatabase : 20 MU (20.971.520 bytes)
    MaxDunpsterTine : 7.00:00:00
    MaxfleceiveSize : 40 MU (41.943,040 bytes)
    MaxflecipientEnuelopeLinit : 1000
    MaxSendSize : 40 MU (41.943.040 bytes)
    MigrationEnabled : False
    OpenDonainfloutingEnabled : False
    Pfc223lEncodingEnabled : False
    ShadowHeartbeatfletryCount : 12
    ShadowHeartbeatTineoutlnterual : 00:15:00
    ShadowMessageAutoDiscardlnterual : 2.00:00:00
    ShadowRedundancyEnabled : True
    SuperuisionTags : <Reject. Allow)
    TLSReceiueDonainSecureList : <)
    TLSSendDonainSecureList : <)
    UerifySecureSubnitEnabled : False
    UoicenailJournalingEnabled : True
    HeaderPronotionModeSetting : NoCreate
    Xexch5øEnabled : True
    I am the Exchange Admin by default, so I appreciate any advice anyone gives.
    Thanks in advance.
    [email protected]

    Hi,
    I recommend that you create a dedicated send connector for Yahoo and smarthost the mails to MX IP address of Yahoo. And then check if the issue persist.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • How do I create a DNS record on my Mac Server?

    How do I create a DNS record on my Mac Server?

    The following is info that I found in another post that I have been trying to follow.
    MrHoffman      New England
    Re: Configure DNS - OS X Server Next Steps
    Feb 13, 2011 6:36 AM (in response to Jimbooooooo)
    You're setting up internal DNS services, you referenced your ISP DNS servers and you should not have, and now those servers have no translations for your hosts. This is a common misconfiguration.
    See [configuring DNS on Mac OS X Server|http://labs.hoffmanlabs.com/node/1436] for how to set up your internal DNS server.
    And if there are any references to your ISP DNS servers here (within your client settings, within your server settings, your Airport settings, etc), then you're usually going to have DNS and connectivity problems. You're running a server now, so you'll be running your own services, and (particularly because of NAT here) referencing only your own DNS server(s).
    You may be setting up external DNS (if and when you need that), but that should happen after you set up your internal DNS. The above article has a link to setting up external DNS, when you get around to that, if/when you need in-bound connections into your LAN.

  • How to find who has created the determination records for packaging instruc

    how to find who has created the determination records for packaging instructions in POF1.
    need to find the user details from POF3.
    can any one plz suggets me.

    Sunny,
    Go to POF1 click on determined record -> Display -.> enter-> F8 then -> double click on the record for which you want to see the responsible person ->click on admin. data tab here u will find the responsible person. hope u got the right answer.
    Ravi Thapliyal
    IdhaSoft

  • How to create an address code for PO delivery address?

    Hi Guys,
    How to create an address code for the delivery address in the purchase order? Please explain me with details.....
    Thanks
    Raja

    delivery adress records can be created with transaction MEAN.
    the number is purely internal.
    In ME21N you can then search by name (you will certainly not know the number)

  • How to create multi garnishment order for the same garnishment document

    Hi,
    Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
    Thanks a lot in advance.

    hi,
    As far as I got it.
    You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
    For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
    Since like order you cannot maintain adjustment also directly.
    Regards,
    Amit
    Reward all helpful replies.

  • How to create a new row for a VO based on values from another VO?

    Hi, experts.
    in jdev 11.1.2.3,
    How to create a new row for VO1 based on values from another VO2 in the same page?
    and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
    Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
    How-to declaratively create new table rows based on existing row content (20-NOV-2008)
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
    I have tried:
    1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
    2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
    3.add: Create insertinside Createwithparams->Nameddata(amount),
    4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
    On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
    <Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
    java.lang.NumberFormatException: For input string: "Amount"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    Can anyone give some suggestions?
    Thanks in advance.
    bao
    Edited by: user6715237 on 2013-4-19 下午9:29

    Hi,CM,
    I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
    My principal requirement is as follows:
    1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
    --so it's better to implement it in UI rather than in EO.
    2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
    --little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
    In order to get full information for the requirements of my use case, can take a check at:
    How to set default value for a VO query bind variable in a jspx page?
    (the end half of the thread: I have a more realworld requirement similar to the above requirement is:
    Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
    Regards
    bao
    Edited by: user6715237 on 2013-4-19 下午11:18
    JAVE->JAVA

  • I have added a new field in IT0006 ,Now when try to create a new record for

    Hi Experts,
    I have added a new field in IT0006 ,Now when try to create a new record for a employee.
    1,If I give the SUBTY in the PA30 screen getting an error "Don't Specify a subty error"
    if and remove the subty and press CREATE button popup's comes and list the subty values.......It was allowing me to enter the subty in the PA30 screen prior to my new field addition in IT0006... is't a problem with the new field addition?
    2, After I choose the subty value from the pop-up I am able to see the next screen....BUT GETTING AN INFORMATION MESSAGE THAT "Assignment to feature P0006 did not take place"?
    3,, In the next screen after I have passed all mandatory fields while attempting SAVE I am getting an error called " Time constraint table in T777D is incorrect" what could be the cause?

    How are u adding fields to table using append in se11 or pm01.
    if you are adding fields using se11 delete it and add it0005 in transaction pm01 and generate object.
    add fields to structure CI_XX_R0005 and generate screen and maintain entry and screen in maintance view add entry and activate program.

  • ....how to create table maintanence generator for a z table and how to use

    Hi...
    3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
    thanks and regards,
    k.swaminath reddy

    Hi,
    Table maintanance Generator is used to manually
    input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
    <b>
    Follow below steps</b>
    go to se11 check table maintanance check box under
    attributes tab
    utilities-table maintanance Generator->
    create function group and assign it under
    function group input box.
    also assign authorization group default &NC& .
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
    select maintaience type as single step.
    maintainence screen as system generated numbers
    this dialog box appears when you click on create
    button
    save and activate table
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    One step, two step in Table Maintenance Generator
    Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
    Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
    please check the link for getting information about table maintenance generator !
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
    http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
    http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
    Regards,
    Priyanka.

  • How to create a RFC destination for extracting data to HANA

    Hello All,
    Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
    I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

    Hi Venkatesh,
    In SM59 t.code we create RFC destinations.
    Go thru the video link for creating RFC destinations step by step
    How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

  • How to create a daily report for sales order

    hi
    how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

    Hi
    You have to use the sales order tables VBAK,VBAP and VBEP
    So keep date field on selection screen
    and treat this date as Order creation data audat field in VBAK.
    based on this fetch the data from VBAK and VBAP  with the following fields like
    VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS  etc and display in the report
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to create different log files for each of web applications deployed in OC4J

    Hi All,
    I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
    1. how to create different log files for each of my deployed web applications ?
    2. what are the advantages in running multiple instances of oc4j and in what case we should run
    multiple instances of OC4J ?
    3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
    Thanks and Regards,
    Kumar.

    Hi Avi,
    First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
    I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
    I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
    Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
    Thanks and Regards,
    Ravi.

Maybe you are looking for