How to create a dynamic parameter off a universe field

Post Author: Summer Frend
CA Forum: General
Hello,
I am trying to create a dynamic parameter in Crystal Reports off my universe field. However the fields appear to all come in as STRING with length 65534 (memo field?). Therefore the fields are not available to choose in my parameter creation box. NOTE: In the universe designer, the field is set as CHARACTER type. I am just trying to make it work with the sample universes that are shipped with BobJ.
Is there a way in the Universe Designer to make the fields come into Crystal Reports as string fields so that I can choose them as the value for the dynamic parameter in Crystal Reports?
Thanks,
Summer Frend

I'll try again,
My problem is that I want a dynamic paramater for my Master flow (on START1 activity, so it is something like that : start1.param = select seq.nextval form dual; or from a function GET_PROCESS_ID) but it seems that I must give a permanent parameter it can not be set dynamicaly. I want my flow to be independant of any human intervention. So if it is the first load it does one thing if not the first load it does something else. I can not understand the point of having a parameter (in) that can not be set dynamicaly (looks more like a constant to me, or I'm missing something here). Hope your getting my point.
Thanks again
Jacques

Similar Messages

How to create a Dynamic IAF in WD

Dear all,
We'd like to create a dynamic interactive form based on a XDP in a WebDynpro application. How can we achieve this?
We tried to use setDynamicPDF() and setInteractive(), but it looks like ADS doesn't create a dynamic pdf.
Only the master page is being displayed.
Any ideas how to create a dynamic interactive form via ADS and how to determine if the pdf is a dynamic interactive form (in the browser).
Kind regards,
Noël
version info: Designer 7, NW SP15, Reader 7.0.7.

Hello,
Use the following code to get a dynamic pdf document created in your wdDoModifyView() method. Make use of the firstTime flag there if required :
IWDInteractiveForm iForm =
(IWDInteractiveForm)view.getElement("InteractiveForm1");
iForm.setDynamicPDF(true);
setDynamicPDF(boolean) nmethod has been deprecated in 04. Moving forward to 04s, you will have a different set of APIs to deal with such requirements. Hence the abiove mentioned method will be taken off with the next major release of NetWeaver.
How do you know whether the pdf document created is static or dynamic ? Well, save the form locally and open it in the designer. Go to File > Form Properties > Compatibility Tab. Check your Form Type there.
Best Regards,
Krish

How to create the dynamic report

Hi,
please help me, how to create the dynamic report

Hi,
Try this..
DATA: p_temp(30) TYPE c DEFAULT 'ZTEST_REPORT'.
TYPES: BEGIN OF t_abapcode occurs 0,
        row(72) TYPE c,
       END OF t_abapcod.
T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'WRITE: / ''TEST REPORT''. '.
APPEND T_ABAPCODE.
INSERT REPORT p_temp FROM it_abapcode.
      SUBMIT (p_temp) AND RETURN.
      DELETE REPORT p_temp.
Thanks,
naren

How to create a dynamic mapping of columnar at the Runtime using ADF or JSF

How to create a dynamic GUI at the Runtime using ADF or JSF in JDeveloper 11g.
What I am trying to build is to allow the user to map one column to another at the run time.
Say the column A has rows 1 to 10, and column B has rows 1 to 15.
1. Allow the user to map rows of the two tables
2. An dhte rows of the two columns are dynamically generated at the run time.
Any help wil be appreciated.....
Thnaks

Oracle supports feedback form metalink was; "What you exactly want to approach is not possible in Htmldb"
I can guess that it is not
exactly possible since I looked at the forums and documantation etc. but
couldnt find anything similar than this link; "http://www.oracle.com/technology/products/database/htmldb/howtos/tabular_form.h
t". But this is a very common need and I thought that there must be at least a workaround?
How can I talk or write to Html Db development team about this since any ideas, this is very important item in a critial project?
I will be able to satisfy the need in a functional way if I could make the
select lists in the tabular form dynamic with the noz_id;
SELECT vozellik "Ãzellik",
htmldb_item.select_list_from_query(2, t2.nozellik_deger, 'select vdeger
a,vdeger b from tozellik_deger where noz_id = 10') "Select List",
htmldb_item.text(3, NULL, t2.vcihaz_oz_deger) "Free Text"
FROM vcihaz_grup_ozellik t1, tcihaz_oz t2
WHERE t1.noz_id = t2.noz_id
AND t2.ncihaz_id = 191
AND t1.ngrup_id = 5
But what I exactly need i something like this dynamic query;
SELECT
vozellik "Ãzellik",
CASE
WHEN (t2.nozellik_deger IS NULL AND t2.vcihaz_oz_deger IS NOT NULL) THEN
'HTMLDB_ITEM.freetext(' || rownum || ', NULL) ' || vozellik
WHEN (t2.nozellik_deger IS NOT NULL AND t2.vcihaz_oz_deger IS NULL) THEN
'HTMLDB_ITEM.select_list_from_query(' || rownum ||
', NULL, ''select vdeger a,vdeger b from tozellik_deger where noz_id = ' ||
t1.noz_id || ''' ) ' || vozellik
END AS "DeÄer"
FROM vcihaz_grup_ozellik t1, tcihaz_oz t2
WHERE t1.noz_id = t2.noz_id
AND t2.ncihaz_id = 191
AND t1.ngrup_id = 5
Thank you very much,
Best regards.
H.Tonguc

How to create a dynamic link in a Form to link to a specific FOLDER

Hello,
I have created a reports of all employees of my department.
This reports shows me the empno and ename
When I clicked on a empno ( for example empno = 1 ) then then I got a MASTER DETAIL FORM about that employee(empno = 1) .
Who he or she is and which course he or she had followed.
I want create a dynamic link in the MASTER DETAIL FORM which shows me directly the folder of that employee ( in this example folder 1 ).
If I clickt on the report with all employees of my department on an other number ( for example empno = 3333333) then if I click on the dynamic link in the MASTER DETAIL FORM I want to see the folder of employee 3333333 !!! You know what I mean ?
What I want to know is, how to create a dynamic link that shows me directly a folder which is dependent on which empno I had clicked on in the report ( report with employee numbers and ename )
Is there any way to pass some parameters into a link to a Folder ? Is this possible in Portal ? Does anyone know how to do this, or do you have a suggestion how to solve this problem ?
Thanks a lot !!!
Chu Lam

Hi Chetan,
I am glad that someone had replied on my question.
I will explain it to you again.
I have created a report that shows me all employees. If I click on a employee number then I get an MASTER DETAIL FORM on my screen with all the information(where he works now and which number I have to dial ifhow can I reach him by telephone) of that employee on which number I clicked on.
I really like this mechanism. (You click on a number and the information that you see in the next screen is dependent of the number you clicked on ! )I have created all this. It works fine.
What I want is to expand this example.
Every employee has a FOLDER (yes, those ones in Content Area ) which they can insert text or image into that folder. The folder name is just the employee number. ( employee with employee number 3303, he owns a folder which is named 3303 and an employee with empno 9999, he or she owns a folder with the name 9999. )
Every employee can tell more about himself in that FOLDER by iserting text and images. For example : What he likes, pictures of his vacation, something like this.
What I want is this :
If I click on the first report,which provides me all employees on screen, on a employee number 3303 then I get a Master Detail Form on my screen with all information about that employee with employee number 3303. And I want in this MASTER DETAIL FORM to create a link that shows me directly the FOLDER of that employee ( 3303), so I can learn more about employee with employee number 3303. But I don't know how to create this link.
That link had to be dependent on the employee number. The difficult thing about this link is that this link had to be dynamic.
I hope this will make it clear to you :
(report all employees:)
empno ename
3301 john smith
3302 peter clark
3303 wilson jones
If I click on a empno ( for example 3303) then I get a MASTER DETAIL FORM which provides me information.
(MASTER DETAIL FORM )
EMPNO 3303
ENAME wilson jones
department New York
mobile number 98908763
Company tel. no day
AOL 097485838 monday till wednesday
Oracle 04848584333 thursday and friday
LINK
(what I want is to create a link here )
If I click on LINK in this MASTER DETAIL FORM then I want to link to the FOLDER of this employee ! ( In this example it is FOLDER 3303.
BUT IF I CLICKED ON THE FIRST REPORT ON A DIFFERENT NUMBER ( FOR EXAMPLE 3301) THEN IF I CLICK ON LINK IN THE MASTER DETAIL FORM THEN I HAVE TO LINKED TO FOLDER 3301.
I just want to know how to make a link like this ( create a dynamic link to a specific folder ).
Thanks in Advance.
Chu

Tutorial Announcement .:: How to Create a Dynamic RSS Feeds ::.

.:: How to Create a Dynamic RSS Feeds ::.
Using Adobe Dreamweaver 8 and InterAKT Rss Reader Writer Extension.
Hello everyone...
RSS feeds are very useful within sites, as they allow integrating for you website content in an automatic manner. Just share the source for the RSS feed, and when the original content changes, it will reflect in the content you share with any one who subscribed in this feeds on your site.
In this tutorial i`ll help you integrate a RSS feed into one of your pages. This will display the content of your website to feeds subscribers with up to date content.
The main purpose of this tutorial is to create a page that allows visitors subscribe to the RSS Feed that they want to see from your website content, or even enter their own in a text box by searching through feeds. also you can define feeds categories if your website is online store, merchant etc...
:: Online Demo ::
:: Go to tutorials ::
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.com

Hey Waleed,
thanks again for this great stuff -- and thanks for removing the login protection :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How to create a dynamic property in JavaFX

public class Person() {
private SimpleStringProperty _Name = new SimpleStringProperty();
public final String NameGet() {
return this._Name.getValue();
public final void NameSet(String Name) {
this._Name.setValue(ColumnName);
public StringProperty NameProperty() {
return this._Name;
private SimpleStringProperty _SurName = new SimpleStringProperty();
public final String SurNameGet() {
return this._SurName.getValue();
public final void SurNameSet(String SurName) {
this._Name.setValue(ColumnName);
public StringProperty SurNameProperty() {
return this._SurName;
How to create a dynamic property in JavaFX ?
ObservableMap, ObservableMapValue, MapPropertyBase, MapProperty
Which one should I use. Can you give an example?

I'm not sure what you mean by "dynamic property"; can you be more explicit?
Your code creates two properties that can be read, written, and observed for changes, though it's probably better to use the standard naming scheme for the methods (e.g they should be getName(), setName(...) and nameProperty()).
An ObservableMap is an extension of the java.util.Map interface that can be observed; i.e. you can register a listener that will be notified if a key-value pair is added or removed from the map.
ObservableMapValue is an interface that defines an observable reference to an ObservableMap; i.e. it has a get() method returning an ObservableMap and a set(...) method taking an ObservableMap. You can register a ChangeListener which is notified when the set(...) method is called. It additionally functions as an ObservableMap, so you can also register listeners that get notified when key-value pairs are added or removed from the underlying observable map.
MapProperty and MapPropertyBase are effectively partial implementations of ObservableMapValue. SimpleMapProperty is a full implementation.
If you just need a single ObservableMap (i.e. not an observable reference to one), then the FXCollections.observableHashMap() factory method will provide one.

How to create a system parameter in Apex

Hi friends,
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
Regards,
Pradeep

bluerose wrote:
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
using the privileges we can achieve this.Although I am not new to APEX I have no idea what you are talking about.
What is "a System Parameter in Apex"? What "privileges" are used to create one?
You'll find it easier to get help if you use terminology that is familiar to everyone...

How to create database dynamically

Hi,
Some one suggest, how to create database dynamically in oracle 8.1.6.0.0 standard edition with an example.
Thanks in advance,

Hello,
I'd ask in the
Windows Presentation Foundation (WPF) forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to create a dynamic table were the JTable columns keep varying

How to create a dynamic table were the JTable columns keep varying based on the input to the jtable

Oooh, I lied. DefaultTableModel has an API for adding and
removing columns. I didn't know that. You should have read
the API.
As for preferring to extend AbstractTableModel rather than
DefaultTableModel, I think it's more correct. DefaultTableModel
is a simple implementation of Abstract for basic cases. It isn't
intended to be extended. I figure most people extending
DefaultTableModel are also extending JFrame, JPanel, and Thread
instead of encapsulating the first two and implementing
Runnable for the third.

How to create a ABAP report off of SRM box for live data?

How to create a ABAP report off of SRM box for live data?
Thanks in advance.
York.

you can try infoset query:
STEP - A:
1. Go to T Code RSQ02 and give the InfoSet name & select CREATE.
2. Provide the Name(Description) and Data Source i.e. for eg here i take "DIRECT READ OF TABLE" = /BIC/AODS100. Then CONTINUE.
3. Select what to Include in the 3 options available with the POPUP, here "INCLUDE ALL TABLE FIELDS". Then Check the fields and click GENERATE(one RED and WHITE round icon).
4. Now provide the PACKAGE for the INFOSET. Come Back(F3).
STEP - B: optional(If u want to create a new user group)
1. Select ENVIRONMENT -> USER GROUPS. Provide the User Group name and CREATE.
2. Provide Description and SAVE.
3. Provide PACKAGE and SAVE. Come Back (F3) to the Initial Screen.
4. Click Role/User Group Assignment. Select Newly Created User Group or an existing one. Then SAVE (CTRL + S). F3.
STEP - C:
1. Select ENVIRONMENT -> Queries. Provide the query name and CREATE.
2. Select the INFOSET u have created and assigned the user group.
3. Provide the Title and Select BASIC LIST. There you have to select (check) the fields you want to display, SAVE and then TEST. It will ask for Variant, just CONTINUE.

How to create ''from to '' parameter in XL reporter for templates

Hi,
How to create ''from to '' parameter in XL reporter for templates
Can anyone help me in this regard
thanks,
Suresh Kannan

Suresh,
1. Goto Report Designer
2. there u can find "Advanced Report Builder" on left side of the window
3. At the below u can find three buttons like "Parameters", "Properties","Apply"
4. Click on "Parameters"
5. then Parameters window will populate
6. Click the new Button
7. Name: give as u like
Category: Literal
Type: Date
Attribute: Leave blank
Default Vale: Leave Blank
Prompt: From Date
This is the process to create the parameters.

How many data in dynamic parametes are allowed in crystal R

I have a problem with a report of crystal report, I create a dynamic parameter for all business partners but it shows only 1,000 and in the database are about 2500, Does any body knows if crystal has a limit for the data in the parameters??
I hope some body can help me.

Please refer to Dynamic Parameters LOv limit

How to create a Dynamic Datatable with sorting functioanlity

Hi,
I am new to JSF and need some help can some one please tell me how to create a dynamic datatable with sorting functionality. I am reading data data from a database table and wants to build the datatable dynamically based on the columns returned. I know how to created a datatble with a fixed number of columns but can't figure out how to create a datatable dynamically with sort functionality. Any small example will help.
Thanks

Hi,
Here is what I have so far and can't figure out how to add the sorting functionality. Any help is appreciated.
Managed Bean:
private List<MyDto> data ;
 public HtmlDataTable getDataTableOne ()
 if ( dataTableOne == null )
 populateCheckBoxes () ; // Preload.
 populateDynamicDataTableOne () ;
 return dataTableOne ;
 public void populateCheckBoxes ()
 data = new ArrayList<MyDto> () ;
 MyDto myDto1 = new MyDto () ;
 MyDto myDto2 = new MyDto () ;
 MyDto myDto3 = new MyDto () ;
 MyDto myDto4 = new MyDto () ;
 myDto1.setChecked ( true ) ;
 myDto1.setValue ( "myDto1" ) ;
 myDto2.setChecked ( false ) ;
 myDto2.setValue ( "myDto2" ) ;
 myDto3.setChecked ( false ) ;
 myDto3.setValue ( "myDto3" ) ;
 myDto4.setChecked ( true ) ;
 myDto4.setValue ( "myDto4" ) ;
 data.add ( myDto1 ) ;
 data.add ( myDto2 ) ;
 data.add ( myDto3 ) ;
 data.add ( myDto4 ) ;
 public void populateDynamicDataTableOne ()
 dataTableOne = new HtmlDataTable () ;
 UIOutput header = new UIOutput () ;
 header.setValue ( "" ) ;
 UIColumn tableColumn ;
 tableColumn = new UIColumn () ;
 HtmlOutputText textHeader = new HtmlOutputText () ;
 textHeader.setValue ( "" ) ;
 tableColumn.setHeader ( textHeader ) ;
 HtmlSelectBooleanCheckbox tCheckBox = new HtmlSelectBooleanCheckbox () ;
 tCheckBox.setValueBinding ( "value" , FacesContext.getCurrentInstance ().getApplication ().createValueBinding ( "#{row.checked}" ) ) ;
 tableColumn.getChildren ().add ( tCheckBox ) ;
 // Set output.
 UIOutput output = new UIOutput () ;
 ValueBinding myItem = FacesContext.getCurrentInstance ().getApplication ().createValueBinding ( "#{row.value}" ) ;
 output.setValueBinding ( "value" , myItem ) ;
 // Set header (optional).
 UIOutput header2 = new UIOutput () ;
 header2.setValue ( "" ) ;
 UIColumn column = new UIColumn () ;
 column.setHeader ( header2 ) ;
 column.getChildren ().add ( output ) ;
 dataTableOne.getChildren ().add ( tableColumn ) ;
 dataTableOne.getChildren ().add ( column ) ;
MyDto.java
public class MyDto
 private Boolean checked;
 private String value;
 public MyDto ()
 public void setChecked ( Boolean checked )
 this.checked = checked;
 public Boolean getChecked ()
 return checked ;
 public void setValue ( String value )
 this.value = value;
 public String getValue ()
 return value ;
JSP
<h:dataTable id="table" value="#{myRequestBean.data}" binding="#{myRequestBean.dataTableOne}" var="row" />Thanks

How to creat a Data provider based on different fields in SAP BW ?

Hi,
Experts,
There are 20 fields of Plant Maintainace like :
SWERK
BEBER
STORT
TPLNR
EQUNR
INGRP
QMDAT   ---peroid
STTXT
QMDAT - Date of Notification
QMNUM
QMTXT
QMART
AUSVN
AUZTV
AUSBS
AUZTB
AUSZT
ERNAM
QMDAB
AUFNR
I want to creat a Report based upon these fields ?
For that I h'v checked the relevant Fields to the   existing standard Datasource in Bw side   &
Checked cubes   created based upon these Datasource in Bw side !
i h'v found some fields are existing different cubes & some are missing .
How to creat a Data provider based on different fields in SAP BW ?
plz suggest      !!!!!!!
Thanx,
Asit
Edited by: ASIT_SAP on Jul 15, 2011 6:25 AM
Edited by: ASIT_SAP on Jul 15, 2011 6:27 AM
Edited by: ASIT_SAP on Jul 15, 2011 12:37 PM

Hi Lee, Please see below..
DECLARE @Machine2 TABLE
DispatchDate DATE
INSERT INTO @Machine2 VALUES ('2014/02/01'), ('2014/02/02'), ('2014/02/03')
DECLARE @DateFrom DATE
SELECT @DateFrom = DATEADD(D,1,MAX(DispatchDate)) FROM @Machine2
SELECT @DateFrom AS DateFrom
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How to create a dynamic parameter off a universe field

Similar Messages

Maybe you are looking for