How to create a event for the form

hi all
i am very new in SAP B1 i had created a new form using screen painter
now i need to create the code that handle the button click event so can any one tell me the deep procedure
thanks in advence

Hi,
Welcome you post on the forum.
SDK help folder has quite a few sample codes for UI and DI. You can learn from those sample codes.
Thanks,
Gordon

Similar Messages

How to define new colors for the form?(Finish)

Hello! Everyone!
I want to define new colors for the new form.
But I don't find where I can define it.
How to define new color for the form?
Thanks in advance!

You have to set the Canvas color or as I said earlier you need to use one of the available color schemas on the OAS or Builder runtime.
If you want to use user defined colors in the builder, then you need to create a new color palette and use it.
I personally haven't tried it, but there is a section in the online help that describes how to do this.
Tony

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

How to create a password for the pdf file

In Adore Acrobat XI, how to create a password for the file? The help states going to Tools Menu and clicking on Protection tab - but there is no such option. In the file - properties - security screen, it shows the security details but does not allow to edit it.

I think you may be mixing up two different products: Adobe Reader (free), and Acrobat ($$).

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

How to create a transport for SAPscript form

Hi Gurus,
Good day!
I would like seek an expertise from you guys on how i'll be able to create a transport for the SAPscript form. The form has already been copied from the other boxes by running the program RSTXSCRP.
Appreciate your help. Thanks in advance!
Cheers,
Virgilio

hi,
First u create the driver program of the sapscript...ok..
then go to the SE93 and create the T_code of that driver program..
Hope This helps
Regards
RItesh J

How to create a playlist for the movies I have?

Hope someone can help me here. How do you set the movies to play continuously? I can't seem to create a playlist for the movies. You can create playlist for podcast videos and musics but how do you creat playlist for the 3 movies I have got on my iphone?
Any help will be greatly appreciated.

Not exactly true. As absurd as it sounds, if you have just one music track in your playlist, then you can select it from the Playlists section on the iPhone and play your videos, movies etc. one after the other.
I have created a completely empty music track in Garageband which I drag onto the end of each and every video playlist I create. An ugly solution, but it works.
You have to remember to check the playlist in both the Video and Music sections in iTunes->Devices->Your iPhone.

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

How to create an Invoice for the sales order using the T-Code VF01

Hello Experts,
How to create an Invoice for a sales order using the T-Code VF01?
Thanks in advace,
Suma

hi,
Make the following settings-
1. Create sales document and billing type
2. assign billing type in sales document type config VOV8
3. Activate itemcategory as sales order related billing
4. Maintain copy control header and item level between sales order and billing
5. Maintain pricing procedure for sales order and billing
6. Define Output procedure in case to print invoice
Regards
Goutham

How to creat an xsl for the following code ?

Hi all !
Could any one help me to creat an xsl (in the form of table) for the following xml data ?
<?xml version="1.0" encoding="UTF-8"?>
<scenarioReport>
<node name="V2_DR">
<netObjId >1 </netObjId>
<result>undefined</result>
<report>xyz</report>
<action>no action</action>
<netObjId > 2 </netObjId>
<result>defined</result>
<report> sdfherh</report>
<action>action</action>
</node>
<node name="V3_DR">
<netObjId >1 </netObjId>
<result>undefined</result>
<report>xyz</report>
<action>no action</action>
<netObjId > 2 </netObjId>
<result>defined</result>
<report>dfhdfj</report>
<action>action</action>
</node>
</scenarioReport>
could you please send me as soon as possible !!!!

To do that you would have to know what output the XSL should produce, based on the input. You haven't said anything about that. All you have posted is a single XML file which could be either the input or the output of this mythical XSL. Do what Steve said and read the tutorial.

How to create a matchcode for the list of Customers "Group key" KNA1-KONZS

Hi All,
with reference to the creation of "Group key" KNA1-KONZS for Customers,
I'd like to know if is possible to create a matchcode for the list of Customers "Group key" created.
Thanks
Gandalf

Hi
MAINTAIN THE GROUP KEY IN GENERAL DATA ---CONTROL DATA SCREEN
If the customer or the vendor belongs to a group, you can enter a group
key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are
possible.
KNA1-KONZS
Cya
udayakumar

How to create a setup for window form application including the related sql database?

i have created a simple window form application project that have only 2 form..
1st one for login in which it'll check the userid n password from database.if both are correct then it will go to 2nd form.
now i want this project to run in another computer.
i created a setup file but its showing some error regarding the database instances connection..
so if anyone can tell me in details how to create the setup file then it'll b a great help..
thanx in advance..

Hi,
Consider the above scenario,I suggest you to use the SQL Server Compact+ ClickOnce Deployment, A Compact SQL database is a file that can be bundled with your application installation. Below is a link guiding you through the creation process of a SQL Compact
database.
http://technet.microsoft.com/en-us/library/ms173009.aspx
The following link discusses setting up the necessary dependencies and prerequisites for SQL Server Compact. (Note, you will need to scroll to the section entitled Private File–Based Deployment.)
http://msdn.microsoft.com/en-us/library/aa983326(v=VS.100).aspx
A ClickOnce Deployment can help you publish your application attach compact SQL database into client machine.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create a BADI for the sceanrio

Hi abapers,
I have a scenario as follows.
I create a Transaction where in i put the details of the product and quantity for a particular project's site. The amount gets calculated based on the products unit value and its displayed in net value field. Now the user saves the transaction and a number gets generated. If the net value amount is less than 500 then the user can approve , if its greater than 501 and less than 1500 then a mail should be generated to his superior who is able to approve and ifs amount is greater than 1501 then a mail should be generated to the top of hierarchy who should approve it.
Now the real challenge is if the same project card has more than 1 new request and the amount is less than 500 the user should not be able to approve instead it should generate a mail to his hierarchy for approval since the site has already been exceeded its limit of approval. bcoz earlier 500 and current 400 which will make it to greater than 500.similarly for the hiearchy.How do i go about it.
Now i want to create a BADI on the save event of transaction to check the net value amount as well as check for earlier amounts saved for the particular site.
Any help will be appreciated.
Regards,
Navin .

hai navin
r u using ECC 6.0 or 4.7 if 4.7 u can create badi defintiion directly form se18 transaction
and define the interface and its methods , once u define them activate them
and to use in ur code u create an instance of ur badi name
and then use
cl_exithandler=>get_instance method in instance name parameter just pass ur badi name and this will create a badi defintion in ur code, and an oen can implement it
if u r usign ecc6.0 then u can either create new badis usign enhancments or classical badis
for clasical badis just go to menu utilites and create classical badis and follw the sam eprocedure
regards
m.a

How to create a Webservice for Adobe Form(I need Coding)?

Hi,
I need coding for Webservice inorder to define the context structure for Adobe Form.
In AdobeForm:
1) I create a dataconnection and while creating it i need to give WSDL Url.
2) I have created it.
3) But iam not getting the Context structure in the Dataview.
For this wht coding i need to write in WSDL File?
Any Help is Highly aprreciated with Points.
Very urgent requirement?

Hi,
I'm not exactly sure what your problem is.
A description on how to call web services can be found in my blog:
/people/juergen.hauser2/blog/2008/02/25/using-web-services-with-sap-interactive-forms-by-adobe-overview-tips
If you are facing an issue with what is displayed in the data view for the WSDL data connection (i.e you are missing nodes) you could try to use Designer 8.0 instead since it cotains bug fixes in that area.
Regards,
Juergen

How to create a instance for the method

it is showing me dump error for the call method
data: i_tab type /SCMB/DM_ORDER_TAB,
      grid1 TYPE REF TO /SCA/CL_SVORDER .
CALL METHOD grid1->READ_BY_IDS
EXPORTING
   IS_CTRL      =
    IV_ORTYPE    = gt_po_detl-ortype
   IV_LOCKFLG   = /SCMB/CL_C_ORDER=>GC_FALSE
   IV_NOADDRESS = /SCMB/CL_C_ORDER=>GC_FALSE
   IV_MAPID     = /SCMB/CL_C_ORDER=>GC_FALSE
   IV_DUEQUAN   = /SCMB/CL_C_ORDER=>GC_FALSE
    IT_ORDERID   = itab_orderid
IMPORTING
    ET_ORDERS    = i_tab
   ET_PROT      =
u r attempting to use a null object reference access a component (variable 'GRID!")
an object reference must point to an object (an instance of a class ) before it can be used to acess a component either the reference was never set or it was set to null using the clear statement

sridhar loganathan,
A ABAP Class is just a definition of fields/variables called attributes and routines (like in standard ABAP forms and functions) called methods. Also you can have events, don't care about before necessary.
The definition itself is just a blueprint. Nothing exists, nothing can be used before you create an instance for this definition.
DATA: grid1 TYPE REF TO /SCA/CL_SVORDER creates a 'handler' for ( to be created) instances of the class.
The statement CREATE OBJECT grid1 creates an instance of the class as defined in the 'blueprint' and assigns the reference to this instance (with all methods, attributes and events) to reference field grid1.
In 999 of 1000 cases SAP creates just one object of a class. In those cases the definition of classes and uses of object oriented programming is more or less obsolete.
Anyway: Just keep in mind that you can not uses attributes and methods of the class directly (blueprint!) but only of the instance created.
An Exception to be noted are so-called Static attributes and methods where an instance is not required. Example ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB gives the character for horizontal tab regardless of platform and char encoding (unicode!). Class ABAP_CHAR_UTILITIES defines static attribute HORIZONTAL_TAB - no instances necessary because this will never change in a given system.
Hope this sheds some light on it
Regards,
Clemens

How to create a event for the form

Similar Messages

Maybe you are looking for