How to create a Flash Wrapper for Captivate 5.5

I just run into the following articule, "Developing a Flash Wrapper for Adobe Captivate " The author told that it is based on Action Script 2.0. Is there any information available creating the wrapper using Action Script 3.0? Where can I find the information related to this topic?
http://www.connectusers.com/tutorials/2009/02/certificates/index.php

That article was, of course, written outside of Adobe... I don't know of any Adobe-specific resources to help develop such a 'wrapper'... But there may be other third-party options.
The link you point to discusses doing this for sake of a certificate. Is that what you need? There are 'widgets' available for Captivate that may satisfy your need...
Or here's an article discussing development of such a widget, which may apply to what you're looking for:
http://blogs.adobe.com/captivate/2010/12/advanced-adobe-captivate-widget-creation-another- experience-in-vicarious-elearning.html

Similar Messages

  • How to create a flash button, for mobile phones?

    i want to know the way how i can create a flash button for mobile in flash CS4.

    Create a button of type "button",set the destination url property to the place u have kept the file.But ur file should be anywhere in Common_top.If this file is stored as blob u can use messagedownload bean.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How can I get Flash Player for Android 4.1.2?

    How can I get Flash Player for Android 4.1.2?

    Hello,
    First of all many thanks for your prompt reply.
    This morning I tried with other versions and unfortunately after installation I couldn’t use them.
    Best regards,
    Josep M. Salvador
    Technical Office Manager
    ESTAMP S.A.U,
    Aire, 33; 08227 Terrassa (Barcelona) Spain
    Phone No: +34 937363131 (ext. + 256)
    [email protected]<mailto:[email protected]>              www.estamp.es<http://www.estamp.es/>
    DISCLAIMER: This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of this e-mail by you is prohibited.
    De: VikramGaur [email protected]
    Enviado el: martes, 10 de septiembre de 2013 16:17
    Para: Josep Salvador
    Asunto: How can I get Flash Player for Android 4.1.2?
    Re: How can I get Flash Player for Android 4.1.2?
    created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Installing Flash Player - View the full discussion<http://forums.adobe.com/message/5668781#5668781

  • How to create Crossword Puzzle Using adobe captivate

    Hi, 
       how to create Crossword Puzzle Using adobe captivate
    Thanks
    Raja

    Hi Darrell!
    I've develeppoed a scrubber starting from the modification JackPister made to your code:
    http://forums.adobe.com/message/4802851#4802851
    I would like that scrubber can move in a circular path and it actually moves, but doesn't scrub... :-(
    Any idea!
    Many thanks in advance for your support!
    Davide

  • How to create a RFC destination for extracting data to HANA

    Hello All,
    Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
    I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

    Hi Venkatesh,
    In SM59 t.code we create RFC destinations.
    Go thru the video link for creating RFC destinations step by step
    How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

  • How to create a daily report for sales order

    hi
    how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

    Hi
    You have to use the sales order tables VBAK,VBAP and VBEP
    So keep date field on selection screen
    and treat this date as Order creation data audat field in VBAK.
    based on this fetch the data from VBAK and VBAP  with the following fields like
    VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS  etc and display in the report
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to create an address code for PO delivery address?

    Hi Guys,
    How to create an address code for the delivery address in the purchase order? Please explain me with details.....
    Thanks
    Raja

    delivery adress records can be created with transaction MEAN.
    the number is purely internal.
    In ME21N you can then search by name (you will certainly not know the number)

  • How to create different log files for each of web applications deployed in OC4J

    Hi All,
    I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
    1. how to create different log files for each of my deployed web applications ?
    2. what are the advantages in running multiple instances of oc4j and in what case we should run
    multiple instances of OC4J ?
    3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
    Thanks and Regards,
    Kumar.

    Hi Avi,
    First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
    I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
    I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
    Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
    Thanks and Regards,
    Ravi.

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

  • How to create an inspection lot for each line item of the Purchase order?

    Hi,
    How to create an inspection lot for each line item of the Purchase order ?
    In detail if possible.

    Hi
       please check this
    [thread|Create Inspection Lot;

  • How to create a custom measure for each level of a dimension

    Hi all!
    Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
    one or more measures.
    thanks in advance
    hope someone helps me.

    For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
    d_aben18
    n1_aben18
    n2_aben18
    n3_aben18
    n4_aben18
    herarchy:h_aben18
    cube:cubo_aben18
    measure:med_aben18
    I create this code to fetch the data to the dimension:
    TRAP ON CLEANUP
    SQL DECLARE c1 CURSOR FOR SELECT-
    total_product_id,1,'N1_ABEN18',total_product_dsc,-
    class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
    family_id,1,'N3_ABEN18', class_id, family_dsc,-
    item_id,1,'N4_ABEN18',family_id,item_dsc-
    FROM PRODUCT_DIM
    "OPEN THE CURSOR
    SQL OPEN c1
    "FETCH THE DATA
    SQL FETCH c1 LOOP INTO-
    :APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
    :APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
    :D_ABEN18_long_description,-
    :APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
    :D_ABEN18_long_description,-
    :APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
    :D_ABEN18_long_description,-
    "SAVE THE CHANGES
    UPDATE
    COMMIT
    CLEANUP:
    SQL CLOSE c1
    SHOW 'KK2'
    Then I create a cube with use compression off, and in rules sum for example.
    After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
    for that I create another program:
    VRB D_RETURN DECIMAL
    if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
    then D_RETURN = 1
    if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
    then D_RETURN = 2
    if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
    then D_RETURN = 3
    if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
    then D_RETURN = 4
    else d_return=26
    return d_return
    "SHOW D_RETURN
    cubo_aben18_med_aben18_stored=d_return
    but it doesnt work.I dont know how to put to assign or to see what I want.
    I report the measure, or I report the program, but then how can I see the values of the measure?
    thanks in advance

  • How to create a account key for application type M ?

    Hi Guys,
    How to create a account key for application type M ? and link the same with
    Gl account.
    thanks.

    Hi
    Please create the account keys or transaction keys in
    SPRO-> IMG-> MM-> Purchasing-> Conditions-> Define Price Determination Process-> Define Transaction/Event Keys
    Thanks & Regards
    Kishore

  • How To Create On Submit Button For Master_detail Page ?

    I have adf page that is master And detail view.
    i want to have one submit button for master and detail block

    Duplicate of  How To Create On Submit Button For Master_detail Page ?
    Please don'r post your question multiple times.
    Timo

  • How to create an Internal Customer  for Ineterplant stock Transfer

    Daer Gurus,
    Please tell me how to create an Internal Customer for Interplant stock transfer.
    Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
    How to maintain the Two plants as supplier and third one as a receiver plant. 
    which account group I should use and what details I have to use for it ?  Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
    thanks in advance
    regards,
    Sanjay

    Hi,
    Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
    Your STO will have following 4 flows.
    1. AAAA - CCCC
    2. AAAA - BBBB
    3. BBBB- CCCC
    4. BBBB- AAAA
    you need to do the following settings...
    1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
    2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
    (Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
    Following is the example settings required for our scenario 1.
    AAAA will be a supplying plant and CCCC will be rec. plant....  for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
    Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
    Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
    Hope this will be useful to you.
    Thanks,
    Muthu

  • How to create an apple id for your child

    how to create an apple id for your child

    You can create an id without accredit card that might be what you want.  Ten use that ID for your child's iMessage and iCloud and use your ID for iTunes and App Store on both phones. That way you can control what is purchased.  I would set up restrictions on the kid's phone with a pun that you only know and durn off in app purchases

Maybe you are looking for