How to create a folder for desktop files

Iam new to Mac can someone help me to create a folder for my desktop word files?

You can right click on your Desktop and select New Folder. In Finder File > New Folder should work too, not in front of my Mac.
Welcome to back by the way. You might find these websites helpful.
Switch 101
Mac 101

Similar Messages

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

No. This is NOT true. I've been battling with this for a couple hours.
I choose Export>Versions
choose
Subfolder Format: Project Name
no custom subfolder
Name Format: Current Version Name.
Aperture creates project folders for each image and names them Projects1, Projects2, Projects3 etc.
To be sure, I have no project named Projects
x
This particular Aperture library has 16 projects. you can see in the screen grab it's created more than 30 folders
If I uncheck the Subfolder, that is say NONE, I just get images and images and images, not in their project folders (of course, because I've said NONE, so why would it put them in project folders?)
I just want to export the entire library and have the versions placed in folders named by the projects from which they came.... ez enough, no?

How to create a folder for a specific e-mail account?

How to create a folder for a specific e-mail account?
I'm using a POP e-mail account and I would like to create folders / sub-folders... how can I do this?

You can right click on your Desktop and select New Folder. In Finder File > New Folder should work too, not in front of my Mac.
Welcome to back by the way. You might find these websites helpful.
Switch 101
Mac 101

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

How to create thumbnail view for html files

hi,
I want to create thumbnail view for html files, not for image files.. can we treat html files as images..
Anybody help me..

You can right click on your Desktop and select New Folder. In Finder File > New Folder should work too, not in front of my Mac.
Welcome to back by the way. You might find these websites helpful.
Switch 101
Mac 101

How to create a shortcut for desktop as with IE?

I've switched my browser to "Firefox" from 'Internet Explorer and would like to know how to create a shortcut for my desktop.

You can drag the favicon on the left end of the location bar onto the desktop to create a shortcut.
You can also use an extension.
* SaveLink: https://addons.mozilla.org/en-US/firefox/addon/savelink/
* Deskcut: https://addons.mozilla.org/en-US/firefox/addon/deskcut/

How to create burn folder for backup with 2 accounts

The are 2 accounts on my computer: mine and my wife's. I want to create a single Burn Folder with important files from both accounts. How do I do that? Thanks,
Owen

Tri-Backup, (30-day Free Trial), can get you around all of this, for one thing it'll allow you to break it up into custom size chunks to span several CDs or DVDs, then Burn those...
http://www.tri-edre.com/english/tribackup.html

How to create a folder in the file system?

Hi All,
How to create a normal folder in my PC's file system in a specific path?

Host just passes commands to the OS; the simplest way to try would be playing a little bit around in the shell to figure out what's not working...
C:\>dir "I am"*
Volume in drive C is System
Volume Serial Number is 5C03-B54D
Directory of C:\
File Not Found
C:\>cmd /c mkdir "c:\I am a directory"
C:\>dir "I am"*
Volume in drive C is System
Volume Serial Number is 5C03-B54D
Directory of C:\
09/21/2010 02:38 AM    <DIR>          I am a directory
               0 File(s)              0 bytes
               1 Dir(s)     509,628,416 bytes free
C:\>cmd /c mkdir "c:\I am a directory"
A subdirectory or file c:\I am a directory already exists.
C:\>or with the host built-in
host('cmd /c mkdir "'||full_path||'"');But first you should check if the directory already exists as mkdir will throw an error if it exists as you can see.
cheers

How to create custom folder for parameterized query

Hi Gurus,
I developed a query to generate report to " who is reporting to who in organization", when i am trying to create custom folder using this query but i am getting error like "The custom sql entered contains parameter and therefore invalid". Could you please help to parameterize the emp_key in query in Oracle Discoverer. Is there any way to pass the value using external procedure for this query.
SELECT
lpad(' ', 8 *(LEVEL -1)) || emp_last_name, emp_key, manager_id, emp_key, manager_key,
mgr_last_name, mgr_first_name, empid,
emp_last_name, emp_first_name, LEVEL FROM cmp_ppl1 START WITH emp_key = &emp_key
CONNECT BY PRIOR emp_key = manager_key;
Thanks & Regards
Vikram

I agree 100% that it's way easier to create a dataview or a custom folder - with no run time parameters being passed to the EUL - as is being done by Vikram.
The only concern I would have is that I don't know if it would work - or at least ever come back in reasonable time - for Vikram and therefore the question about parameters (only Vikram can say).
The reason I'm wondering is that I've created SQL similar to being shown (when used in an org chart report at a large client) and the start / connect by is used for going down the tree getting everyone on the way. And if it's not limited - that could be a huge undertaking - of records and/or time. Guess it depends on how many people work at the organization (and of course, levels).
But otherwise, absolutely, I would try and bring back all logical records to the folder and then filter in Disco.
Russ

HT2523 How do I add shadow to the title of a document while in Pages? For instance: NEW YEAR'S NEEDS. I'm also at a loss to know how to create a folder for certain types of documents such as "Sermons" or "Lessons."

How do I add shadow to a title, such as, NEW YEAR'S NEEDS, while in Pages? I also don't know how to set a new folder for documents of the same type such as, "Sermons," or "Lessons." Any help will be greatly appreciated.
Donnie

Yes, I very well may be over thinking this, but I tried duplicating and moving it, but the text distorts slightly, which can be mostly remedied by rotating it on the x-axis, although the light is still off. And the shadows and reflections are not visible - this is pic1... In pic2, I used "rotate 3d object" with the green and red arrows, instead of just sliding it up the y-axis using the coordinates in the scene tab. Using the green and red arrows to move the text preserved the reflections but the shadows now aren't visible. It was also hard to align the text perfectly in scenario 2. Thanks for the help

How to create source system for flat file loads

How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.

hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
           |---> context menu
               |--->create......
step:3 select your required source system Icon.
          (in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)

How to set default folder for recieved files (Phon...

Hi
I got Nokia 3110 classic mobile, I was unable to store received files(from bluetooth, IR etc) in Memory card. It gets stored into phone memory, i have to manually move it to memory card. But the phone memory is too low, so i cant transfer large files.
Any solution to change the default saving option to Memory card instead of phone memory.
Regards
Aravinda

Hi and Welcome to Apple Discussions
Control-click a pdf file and choose "Get Info". In the Info window choose which application to open the file with and then click on the "change all" button. Voila!
Matthew Whiting

How to create a password for the pdf file

In Adore Acrobat XI, how to create a password for the file? The help states going to Tools Menu and clicking on Protection tab - but there is no such option. In the file - properties - security screen, it shows the security details but does not allow to edit it.

I think you may be mixing up two different products: Adobe Reader (free), and Acrobat ($$).

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

Hi Ed
Thank you for contacting me, however I already know how to save text to
audio files via timeline using the Export feature.
So my question was not entirely clear and I apologize for that. To explain
further, whenever I save a text to audio file, captivate takes me to a
default save as folder where I then have browse back to my production
folder where I am keeping all my Txt to Aud files. This is very tedious
process when you have alot of files to save. So my question was is there a
way to configure captivate so I can make my production folder the default
file for whenever I save a Txt to Audio file through Export feature that
the system automatically takes me to that production folder, and I am
spared the long tedious process of saving the file manually to the
prodcution folder I want.
I have copy the pathway to the production folder in the URL filed in the
Save As dialoge box and that workaround as cut the work down but I still
have to paste that URL field to point the file to the right folder. So it
would be nice if I could do everything automatically. Microsoft makes this
capability in their MS Office applications, so I was thinking Adobe might
do the same thing. Your help with this would be appreicated,
Thanks
Merrill Roberts
Sr. Training Specialist
SunGard Availability Services
Direct 925-831-7730
Mobile:415-215-9280

How to create a folder for desktop files

Similar Messages

Maybe you are looking for