How to create a FSV with the text groups in spabish and English

Hi gurus,
could you help me with a issue. I want to know where i can add the text in english in the groups of the fse2 , because i have tha configuration with spanish text but when i execute the f.01 with the language EN the system do not give text in English. So could you help me?
best regards!

I just tried it with our FSV, system language is EN and i executed the report in DE. I could see german texts but not on the FS items.
I dont know, if that is possible because these are custom texts/input fields from you as compared to the system text converted to the required language on the report header and other layout fields
If you want the FS items to also show text in 2 languages, i recommend creating another FSV in the alternate language and using it.

Similar Messages

Can someone tell me how to create accounting entries with the account status as error

Hi,
Can someone tell me how to create accounting entries with the
account status as error?
Thanks!!
Danny

It's call fixed/static background, and it is NOT directly support by iweb, you will need post processing either in html or javascript.
Varkgirl (you need to search the previous forum) and I did it since iweb1:
try Safari, and scroll: http://www.geocities.com/[email protected]/Links.html
invisible link? roddy, fishing for info again?

How to create a pdf with the correct size?

Hi there
How do I create a pdf with the correct size? I created several albums and ordered them. Now I want to backup the album and I know how to create a pdf, but when I choose A5 it's to big, when I create my own size it's not the size it should be. The original (made with iphoto) is a small size album 200x150mm. But when I create my own size (200x150) it shows some white borders.
Does anybody have some tips ore workarounds?
Yuri
Imac
Iphoto 11 (9.4.2)

Books are designed for and printed on 8.5 x 11 inch stock, US Letter size. You shouldn't have to select any size. While viewing the All Pages mode in the book Control-Click on the page and select Save Book as PDF from the contextual menu.
That will create a PDF that iPhoto uses to upload and print. Not all pages will be the same size as the dust jacket will be present in it's full size, 32.8 inches x 8.91 inches:
If you want a PDF that's designed for your own printing the type Command+P while viewing the All Pages window. In the first print window click on the PDF button. It will present you with a contextual menu where you should select Save as PDF. That will give you an 8.5 x 11 PDF file with all pages the same size.
OT

How to create a button with the drop-down menu?

I want to create a button with the drop-down menu, which is like the 'back' on the tollbar in IE. I heard JPopupMenu can reach the certain result, but the button hadn't a down arrow. Who can help me?

i have made something like this :
//======================================================================
package com.ju.guiutils
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.util.Vector;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.plaf.basic.BasicComboBoxUI;
* @version 1.0 14/04/02
* @author Syed Arshad Ali [email protected] 
* Usage : ButtonsCombo basically performs function button + JComboBox, if we have different options for
* same button then we can use this ButtonsCombo.
* By the way there is no button at all in ButtonsCombo
public class ButtonsCombo extends JComboBox {
//===================================================================================
* Create ButtonsCombo with default combobox model
public ButtonsCombo () {
super ();
init ();
//===================================================================================
* Creates a ButtonsCombo that takes it's items from an existing ComboBoxModel.
public ButtonsCombo ( ComboBoxModel model ) {
super ( model );
init ();
//===================================================================================
* Creates a ButtonsCombo that contains the elements in the specified array.
public ButtonsCombo ( Object [] items ) {
super ( items );
init ();
//===================================================================================
* Creates a ButtonsCombo that contains the elements in the specified Vector.
public ButtonsCombo ( Vector items ) {
super ( items );
init ();
//===================================================================================
private void init () {
setBorder ( BorderFactory.createBevelBorder ( BevelBorder.RAISED ) );
setRenderer ( new ComboRenderer() );
setUI ( new ComboUI() );
addMouseListener ( new ComboMouseListener() );
//===================================================================================
* Set items for ButtonsCombo in the specified array
public void setItems ( Object [] items ) {
setModel ( new DefaultComboBoxModel( items ) );
//```````````````````````````````````````````````````````````````````````````````````
* Set items for ButtonsCombo in the specified Vector
public void setItems ( Vector items ) {
setModel ( new DefaultComboBoxModel( items ) );
//```````````````````````````````````````````````````````````````````````````````````
* Get current items in a array
public Object [] getItemsArray () {
ComboBoxModel model = this.getModel ();
if ( model != null ) {
int size = model.getSize ();
if ( size > 0 ) {
Object [] items = new Object[ size ];
for ( int i = 0; i < size; i++ ) {
items[ i ] = model.getElementAt ( i );
return items;
return null;
//```````````````````````````````````````````````````````````````````````````````````
* Get current items in a Vector
public Vector getItemsVector () {
ComboBoxModel model = this.getModel ();
if ( model != null ) {
int size = model.getSize ();
if ( size > 0 ) {
Vector itemsVec = new Vector();
for ( int i = 0; i < size; i++ ) {
itemsVec.addElement ( model.getElementAt ( i ) );
return itemsVec;
return null;
//===================================================================================
class ComboMouseListener extends MouseAdapter {
public void mouseClicked ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
public void mousePressed ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
ButtonsCombo.this.setBorder ( BorderFactory.createBevelBorder ( BevelBorder.LOWERED ) );
public void mouseReleased ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
ButtonsCombo.this.setBorder ( BorderFactory.createBevelBorder ( BevelBorder.RAISED ) );
//===================================================================================
class ComboRenderer extends JLabel implements ListCellRenderer {
//````````````````````````````````````````````````
public ComboRenderer () {
setOpaque ( true );
//````````````````````````````````````````````````
public Component getListCellRendererComponent ( JList list, Object value, int index, boolean isSelected, boolean cellHasFocus ) {
setBackground ( isSelected ? Color.cyan : Color.white );
setForeground ( isSelected ? Color.red : Color.black );
setText ( ( String )value );
return this;
//````````````````````````````````````````````````
//===================================================================================
// We have to use this class, otherwise we cannot stop JComboBox's popup to go down
class ComboUI extends BasicComboBoxUI {
public JButton createArrowButton () throws NullPointerException {
try {
URL url = getClass ().getResource ( "/images/comboarrow.gif" );
JButton b = new JButton( new ImageIcon( url ) );
b.addActionListener ( new ActionListener() {
public void actionPerformed ( ActionEvent ae ) {
return b;
} catch ( NullPointerException npe ) {
throw new NullPointerException( "/images/comboarrow.gif not found or /images folder not in classpath" );
catch ( Exception e ) {
e.printStackTrace ();
return null;
//======================================================================
you can cutomize this according to your requirement , okie ;)

How do i split content from the text file using tab and spaces...?

Hi.. Just want to ask help to all the experts. Im new in java and i have this problem on how to split the contents of the text file. ill show you the contents in order to let you see what i mean.
FileName: COL.txt
AcctNo AcctName Primary Secondary Status Opendate
121244 IPI Company Noel Jose Active 12/05/2007
As you can see the content i want to split it per column.. Please help me

Jose_Noel wrote:
Hi prometheuzz,
What do you mean by one thread...?You created two threads* with the same question in it. That way, people might end up giving you an answer that has already been posted in your other thread: thus wasting that person's time.
Just don't create multiple threads with the same question please.
* a thread is a post here at the forum

How to: Create a Program with the rs232 Device -Magcard Reader Writer

Hi Guys!.
Im New in using VB.net 2010 express
and it is my first time to do a project with a device needed to incorporate with it.
I have a device Magnetic Card Reader writer and a i want to create a connection and UI
that interacts with the device alone without using the default application and process.start command.
the main problem i want to be solve is to perform the connection and commands on a single form by allowing the user to read and write the data on a single form.
what i want to do is to create a main form that executes the commands needed to activate the event or allows the user to use the device w/o using the software. with the use of text box and button, while the read executes automatically if the card is swipe
to it end fill out the focus textbox given.
i have here a document that discuss commands for the device and i think it is needed to successfully connect all the process from device to the system
can you help me to do this project? tnx.. :)

Hi,
Welcome to MSDN.
I am afraid that this is not the proper forum for this issue, since each Magnetic Card Reader writer has its API for developers.
You could consider getting supports by connecting with the publisher of that Magnetic Card Reader writer which should have the sample about using its API.
In addition, I did a research, you could refer to
Build a .NET Class for Serial Device Communications with P/Invoke to get how to communicate with that serial device.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

How to create a form with the Designer Peopletools

Help friends of the forum:
Any page of examples of how to create forms with the tool in PeopleSoft Application Designer

http://www.oracle.com/technology/documentation/psftent.html
Down Peopletools 8.xx PeopleBooks and look at the PeopleSoft Application Designer
It walks you through the whole Process

How to create web applications with the LabVIEW web server

Wonderful Forum,
I've noticed that sometimes it can be tricky for LabVIEW users to learn how to create their own custom web clients using the LabVIEW web server. I created a LabVIEW web development community group and wrote some tutorials to teach the basics of creating web clients using HTML, Javascript, and AJAX. The idea is that LabVIEW users without any web background can quickly look at some tutorials and examples to get started on their own projects.
https://decibel.ni.com/content/groups/web-services
What do you think?
Joey S.
Software Product Manager
National Instruments

Hi Joey,
A great idea! I recently presented at a local user group meeting about my WebSockets API (see the links in my signature). I've uploaded the presentation and the demo code I gave to our UG here.
I think the barrier to entry is with needing to know the web languages (e.g. html/css/js) as well as writing your LabVIEW code. I have joined the group and look forward to seeing some interesting content on there! Certainly some demos of using AJAX to make requests to Web Services and do something with the data (e.g. display on a graph) would be a good place to start.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

How to create a CD with the WinXP OS OEM?

Hi all,
Recently I bought a Tecra A7 that has WinXP OEM preinstaled. My question is: has Toshiba any tool to create WinXP CD? If not, why so and how can I do it cleanly? I want my PC to make tests and I probably have to format it in future!
Thank's
Pedro

Eldorado, thank's for your reply.
I can use ghost, yes, but I think I should not have to do it because it makes no sense! First, I bough a computer WITH the Operating System and I must assure that if something happens to my OS I can restore it, WHATEVER it happened; second, if I want to use Ghost, I have to get an unauthorized copy (because I don't have it) and I don't want to do it! As far as I know, the only thing that you can generate a CD copy is the Tools and Drivers CD.
Of course I could *make* the WinXp with the directories that exist in CD and some freeware. But I think I don't have to do it, it should be done. Do you understand what I mean?
I have the Restore CD, yes. And the short time I contact with it (only yesterday) I didn't see a way to create Win Xp image.
It was nice if someone from Toshiba answers my question.
Thank's.
Pedro

How to create a circle with the origin not at (0,0)

I want to create a circle but the origin is not at (0,0).
I have the following data;
- point coordinate (X1,Y1)
- radius of the circle
Also, I want to create a line between the origin and the point (X1,Y1).
Kindly show me how can I do this. Thank you very much.

The accuracy of the GPS Receiver is +/- 0.5 meter. Its a Novatel product (Flex Pak). I am getting the string data from the GPS receiver. I took the Longtitude data as for my X and Latitude data for my Y. I took the Longtitude and Latitude data from the center of post for my reference calculation only to get the true value of X and Y at the end of the boom. I call the X and Y value at the end of the boom as dynamic because it always give me the value wherever the boom goes. Please see the attached sample VI's.
At one point , I actually measured, using a tape measure, the distance from the end of the boom to the center of post and i am getting the correct radius. But when I rotate the boom on the other side it will give me a different radius. And looking at this radius value, while rotating the boom, I can judge that my point of origin is not (0,0).
At this point I have no idea how to get the correct origin. Kindly teach me if you have idea on this.
Do you think the way I calculated for the true value of X and Y is still correct? Is my reference too far?
Thank you very much.
Attachments:
plotting xy graph 1.vi ‏22 KB
dynamic xy calculation.vi ‏28 KB
dynamic radius calculation 1.vi ‏15 KB

How to create a folder with the name = date (e.g. "20030512") with LV6.0

hi,
i want to create folders with the name = date automaticly.
i found several solutions here, but all in LV6.1. could somebody give me an example in LV6.0 ?
I tried it with "get date-string" but that date-string has "." in it :-(
6.1-example :
here

Hope this will help!
ian.f
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
folder_create_2003.vi ‏66 KB

How to Create a Parameterized Report - The select "- ALL-" for department and manager not working.

I downloaded the OEHR Sample Objects application and followed the steps in Oracle® Application Express Advanced Tutorials
Release 3.2.
The parameters and report seem to be working correctly except when I enter "all" for department or manager I get no matching hits.
What's the most efficient way to retrieve "all" if the users selects all for dept and mgr - thus we'd want to return all records in the table.
Region snipprt
Enter Search
Search Employee
Dept
- ALL -
Administration
Marketing
Purchasing
Human Resources
Shipping
IT
Public Relations
Sales
Executive
Finance
Accounting
Treasury
Corporate Tax
Control And Credit
Shareholder Services
Benefits
Manufacturing
Construction
Contracting
Operations
IT Support
NOC
IT Helpdesk
Government Sales
Retail Sales
Recruiting
Payroll
Mgr
- ALL -
Steven King
Neena Kochhar
Lex De Haan
Alexander Hunold
Nancy Greenberg
Den Raphaely
Matthew Weiss
Adam Fripp
Payam Kaufling
Shanta Vollman
Kevin Mourgos
John Russell
Karen Partners
Alberto Errazuriz
Gerald Cambrault
Eleni Zlotkey
Michael Hartstein
Shelley Higgins
The following is the sql that was provided as part of the turitoral.
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
     (lower(first_name) like '%' || lower(:P1_NAME) || '%' OR
      lower(last_name) like '%' || lower(:P1_NAME) || '%')
AND department_id = decode(:P1_DEPT,'%null%',department_id,:P1_DEPT)
AND manager_id = decode(:P1_MGR,'%null%',manager_id,:P1_MGR)

Hi,
Use this..
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
    (:P1_NAME IS NULL OR
        (:P1_NAME IS NOT NULL AND
                (lower(first_name) like '%' || lower(:P1_NAME) || '%') OR
                (lower(last_name) like '%' || lower(:P1_NAME) || '%')
    ) AND
    (:P1_DEPT IS NULL OR department_id = :P1_DEPT) AND
    (:P1_MGR IS NULL OR manager_id = :P1_MGR)

How to create a dynamic menu for each group of responsibility and user

Hi
I am using Jdev 11.1.1.6 and new to ADF, my application require to populate menu which would be different for different groups of user, and the user in each group would have different submenu depends on their responsibilities assigned to each one of them.
so on the top level would be menu_top_item1, menue_top_item2
|-->submenu1_1 |-->submenu2_1
|-->submenu1_2 |-->submenu2_2
also the menu would need to be on_mouse_over to show the submenu items or collapsed back.
any idea what would be the best approch? or is there any example around?
thanks a lot

You can use ADF Security to control access to menu options.
More about ADF Security here:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfSecurity/AdfSecurity.html
If you also use WebCenter you might use their menuing option:
https://blogs.oracle.com/shay/entry/webcenter_portal_intro_for_adf

How to create a polygon with the Lat/Long Coordinates

I have set of Lat/Long coordinates and I need to create a polygon geofence. Can any of you know how to do this please share your thoughts with me
I have the following coordinates
-84.3087, 39.3465; -84.3118904, 39.3306296; -84.3265158, 39.3372422; -84.2866, 39.3371; -84.2958, 39.3284; -84.2888, 39.3241
Thanks

Assuming these are long/lat values, the polygon can be defined as:
sdo_geometry(2003, 8307, null, sdo_elem_info_array(1, 1003, 1),
sdo_ordinate_array(-84.3087, 39.3465, -84.3118904, 39.3306296, -84.3265158, 39.3372422, -84.2866, 39.3371,
-84.2958, 39.3284, -84.2888, 39.3241, -84.3087, 39.3465))
siva

How to create a FSV with the text groups in spabish and English

Similar Messages

Maybe you are looking for