How to create a funds center hierarchy

Could somebody tell me how to create a funds center hierarquy ?
My idea is to create a hierarchy vaious funs center , not only to create and assign.
Thanks in advance
Olga

Hi Olga,
Please, use FMSD transaction for this. If you want to create several groups, use FM_SETS_FICTR1 transaction.
Regards,
Eli

Similar Messages

  • Fund Center Hierarchy was messed

    Dear all FM expertise,
    I don't know what happens with the Fund Center Hierarchy. I test create fund center and delete fund center. I don't know what happens to the system then now i can't recover the fund center hierarchy. When i use transaction FMSD , now the status of all fund center (excluding top fund center) is no assigned (red label) and is in the same level as top fund center. when i activated it and move it to the right place, the system gives error as "Function not allowed: Budget was assigned for funds center ..." . I check the individual fund center, the hierarchy set is correctly. when display the hierarchy, shows only top fund center. I tried to activate it and save but the system shows Error in the ABAP Application Program.
    Have anybody a good advice?

    Hi,
    I am not sure how familiar are You with sap internal functionality and if it is allowed to use it just so. Look e.g. in the thread
    https://forums.sdn.sap.com/click.jspa?searchID=6455527&messageID=3489098
    Be very carefull with the table fmhisv - if one hierarchy "connection" looses, the hierarchy will be missed. It is very important that parent,next and sibling have correct data in this table. Perform the editing just on Your own risk.
    Good luck
    Alexey

  • How to delete a cost center hierarchy

    Hi all,
            We are having a issue regarding the cost centers. The cost centers have been assigned wrong cost center numbers. Now the client wants a set of new cost center numbers to be used in the system. In order for that to be done I thought may be if I can change the cost center hierarchy that has been assigned to the controlling area in OKKP transaction we can assign new cost centers to the new hierarchy and solve the problem.
              But the system does not allow us to assign a different cost center hierarchy from the already existing one when cost centers are assigned to it.
    My issue is how to delete the cost center hierarchy.
    If that is not possible how can we remove the cost centers assigned to the cost center hierarchy ( is this possible)
    Last question can we delete the transaction data posted to cost centers.
    Points will be assigned to all the replies.
    Thanks,
    Sarada

    Hello Sarada,
    If the requirement is to track new cost centers only going forward, then you may need to create new Cost Centers, block old cost centers. Create a new node in the hierarchy saying "Old-do not use".
    If the requirement is to have the history transactions reflect the new cost centers as well, then you will need to undertake a project for SLO (System Landscape Optimization) which will replace this data at table level. This is a major project in itself and the programs are proprietary to SAP.
    Hope this helps.

  • Fund center Hierarchy - automatic refresh in BW possible?

    Hi Friends,
    I have an issue with fund center heirarchy data load.
    Whenever the heirarchy is changed in R/3, the BW load is not picking the new hierarchy instead the old values are getting in BW loads.
    If we refresh the infopackage with the available hierarcy from OLTP, and trigger the load, it brings the latest data.
    Is there by any chance make this automated without manual intervention?
    Please provide your suggestions.
    Regards,
    Ramesh

    Hi Ramesh,
    I have a similar issue.
    I am using a hierarchy created on Funds Center and I have refreshed the data from R/3.
    The new data I get to see in the Query while restricting but when the query is run I still see the old Hierarchy.
    Same is the case with workbook.
    Do you have any input to solve this problem?
    Thanks & Regards,
    Savitha

  • HOW TO CREATE A COST CENTER

    HI ! ALL
    I WANT TO KNOW ABOUT HOW TO CREATE A COST CENTER IN SAP .
    EXAMPLE - ADMINISTRATION DEPT , MARKETING DEPT , PACKING DEPT.
    REPLAY ME - 09558175176

    hi
    http://wiki.sdn.sap.com/wiki/display/ERPFI/HowtocreateaCost+Centre
    see this link you can clearly understand...given with screenshots

  • CHanges to Funds Center HIerarchy not reflected in STS

    Hello,
    I wonder if the changes that I made to say Funds Center hierarchy should be automatically reflected in STS. Currently when I upload new hierarchy to BW from R/3 my hierarchy never gets updated for STS. Is this a normal procedure that I have to manually re-import hierarchy in BW to STS, or this is abnormal?
    Thank you

    In my experience the changed hierarchy has to be re-imported to the STS subplan.
    (Even if the hierarchy was automatically changed, it would still be necessary to assign names, functions,  to the new elements).
    Regards Stephen

  • Extracting Funds Center Hierarchy from R/3 to BW

    Hello Experts,
    The goal is to extract Funds Center hierarchy defined in R/3 table FMHISV, field FISTL (Funds Center) to BW.
    On the BW side we have 0FUNDS_CTR InfoObject setup which is compounded with 0FM_AREA (Financial management area), which is FIKRS field in FMHISV table in R/3).
    I have tried this document -
    http://www.bwexpertonline.com/archive/Volume_03_(2005)/Issue_08_(September)/V3I8A2.cfm
    ad this SAP note - 134975.
    I seem to setup everything that is asked in those 2 documents,  but when I run the load, nothing gets loaded (only the top text node).
    Am I missing any step? Do I have to define a set in R/3 manually, etc. Do i need to mofidy my ABAP code?
    Any help would be aprpeciated, esp step by step guide.
    Thank you

    In the tcode GS03, click on F4 help of set. Now in reference table name/field name enter your field name. If hierarchy is Set hierarchy you will get it in the F4 help list.
    KJ!!!

  • How to create New Work Center

    Dear Experts
                      How to create New Work Center?, what are all the inforamtions  need while creating workcenter.
    Regards
    Rajakarthik

    Hi,
    In addition to the above post, you need to identify that:
    1. Whether you need separate activity types and cost center for the newly created work center. These details are entered in the Costing View of the Work Center.
    If these are required then use KL01 to create new activity, KP26 to define the activity price.
    If required create cost element using T Code KA01 and Cost Center using KS01.
    Take help from the CO guy on this.
    2. Also  you need to ask the concerned about the operating times for the wor center. That is Start time and End time of WC. It is used for capacity evaluation and scheduling of the orders. It is maintained in the capacity view (Bottom left Button in the view).
    this view will also contain the details regarding the calendar, to be assigned to the work center, if needed. Collect details for this requirement. Also you can assign a different calendar to WC apart from factory calendar.
    3. Find out whether this WC will be operating in shifts or not. Accordingly maintain the details.
    Hope it is useful for you.
    Revert for clarifications
    Regards,
    Rohit.

  • Fund Center Hierarchy Extraction

    Hi all, we are trying to extract all the fund centers under a node maintained in the fund center hierarchy. Anyone can advise any SAP standard function module can be use to achieve this result. Kindly advise. Thanks.

    Hi,
    You can try using FM_FICTR_READ_MULTIPLE.
    Regards,
    Eli

  • How to creat a cost center

    While creating a cost center it is throwing a error that Controlling area XXXX does not have a standard hierarchy (please assign one)..
    Pls Guide what i need to do..
    Its urgent..
    Thnx & regards
    Subhajeet

    If you assigned the Std Hierarchy to the Controlling Area while the CCtr Create screen was still open, get out of that screen and try to create the CCtr again.
    Else, go to OKEON and maintain a hierarchy for the Controlling Area. Create a group or two below the Std Hierarchy and then try to create the CCtr.
    Cheers.

  • Budget carry forward- giong up in the fund center hierarchy

    Hi,
    We are about to close year 2008 in the FM. We work with the former budget, and we don't have budget structure.
    When carry forward the commitment u2013 the receiver is the same as the sender.
    But, when I carry forward budget for commitment, the receiver is the upper fund center in the hierarchy.
    The budget is not where the commitments are.
    What can I do?
    best regards,
    Edit.

    Hi,
    The budget of year 2008 was entered at the subordinate FC.
    If there is budget in year 2009 at the subordinate FC, the budget carry forward is right (the sender and the receiver are the same).
    Only if there is no budget on the subordinate FC, the budget runs upwards the hierarchy.
    Thanks,
    Edit.

  • How to create a profit center group using MDG-F?

    Given that there is a controlling area CA created in ECC. under which there is a standard profit center hierarchy let us call it ABCD created. Under ABCD, there is a Profit Center Group PCG01 already created in ECC. Now what steps (or screens) I should go through on MDG-F if I want to create another profit center group PCG02 that should be placed under PCG01? Thanks for your help.

    Hi ,
    First of all you need to create Profit Center from Create Change Request by selecting the change request type of PCTR Single Processing.
    Complete the all approval of the Profit center. Once your PCTR gets activated , it will go & sits into MDG tables ONLY.
    You have to make a replication setup of Local replication for replicating this created PCTR via MDG to the ECC Back end so that you can see the same data in the CEPC table.
    Once you are done with this, use Collective Processing form Change Request of PFCG role where you can create your PCTRG & PCTRH . You can assign the PCTR to PCTRG & PCTRH accordingly.
    Hope this answers your all questions.
    Best Regards,
    Kaustubh

  • How to copy standard profit center hierarchy?

    Hi!
    I should copy standard profit center hierarchy from production to development and test systems, how can I do that? Changes in standard profit center hierachy have made straight to the production system.
    Thanks!
    Points will be given!

    Hi
    Yes, it is possible.
    You can understand it better by reading the F1 help after clickin on the item "Cost element groups" available under the same Master data1 tab.
    Regards

  • Fund Center Hierarchy

    Hi to All,
    My name is Samad Farooq, Currently we are using the SAP version 4.6C. We are using Funds Mamangement.
    How can we change the superior center for the fund center, if it contains budget (object ) on it. For eg. Cost Center is 214010001 and it has superior center 214. Now 214 also has a budget, how can we change the superior center 214 for the cost center 214010001. This Cost Center also has a actual posting on it.
    Thanking You All in Advance.
    Samad Farooq Dandiya

    Hi, there is no standard solution for this case

  • SAP 8.81 : How to create a Profit center

    This Code works on SAP 8.8 but not on SAP 8.81 PL 01
    How to create a profitCenter on 8.81 ?
    oCmpSrv = oCompany.GetCompanyService()
    Dim oPCService As SAPbobsCOM.IProfitCentersService
    Dim oPC As SAPbobsCOM.IProfitCenter
    Dim oPCParams As SAPbobsCOM.IProfitCenterParams
    Dim oPCsParams As SAPbobsCOM.IProfitCentersParams
    oPCService = oCmpSrv.GetBusinessService(SAPbobsCOM.ServiceTypes.ProfitCentersService)
    oPCParams = oPCService.GetDataInterface(SAPbobsCOM.DimensionsServiceDataInterfaces.dsDimensionParams)
    oPC = oPCService.GetDataInterface(SAPbobsCOM.ProfitCentersServiceDataInterfaces.pcsProfitCenter)
    oPC.CenterCode = "code"
    oPC.CenterName = "name"
    oPC.InWhichDimension = 1
    oPCParams = oPCService.AddProfitCenter(oPC)
    oStr = oPCParams.CenterCode

    Hi,
    What you declare for oCmpSrv and oStr? I have tried so many way to work around with the code but still got message pop out saying Object variable or With Block variable not set when the code run to oCmpSrv = oCompany.GetCompanyService().
    Does I declare oCmpSrv As SAPbobsCOM.CompanyService correct?
    Regards,

Maybe you are looking for