How to create a graph for the exact values in pivot table
hi all,
how can i create a graph exactly that shows pivoted values. i created one pivot table and deleted the table view. when i am creating the graph it is not showing the graph for pivot table values.
for that you need to edit the pivot table properties and then select graph pivot results tab in the top middle .. hope this helps
Similar Messages
-
How to create a validation for the project coding mask
Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh -
How to create a password for the pdf file
In Adore Acrobat XI, how to create a password for the file? The help states going to Tools Menu and clicking on Protection tab - but there is no such option. In the file - properties - security screen, it shows the security details but does not allow to edit it.
I think you may be mixing up two different products: Adobe Reader (free), and Acrobat ($$).
-
HOW TO CREATE SEVERAL folder for the generation and READING FILE
HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez SalazarI hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2 fhandle utl_file.file_type;
3 begin
4 fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5 utl_file.put_line(fhandle , 'eygle test write one');
6 utl_file.put_line(fhandle , 'eygle test write two');
7 utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2 fhandle utl_file.file_type;
3 fp_buffer varchar2(4000);
4 begin
5 fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7 utl_file.get_line (fhandle , fp_buffer );
8 dbms_output.put_line(fp_buffer );
9 utl_file.get_line (fhandle , fp_buffer );
10 dbms_output.put_line(fp_buffer );
11 utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS UTL_FILE_DIR /opt/oracle/utl_file
SYS BDUMP_DIR /opt/oracle/admin/conner/bdump
SYS EXP_DIR /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS UTL_FILE_DIR /opt/oracle/utl_file
SYS BDUMP_DIR /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM -
How to create a playlist for the movies I have?
Hope someone can help me here. How do you set the movies to play continuously? I can't seem to create a playlist for the movies. You can create playlist for podcast videos and musics but how do you creat playlist for the 3 movies I have got on my iphone?
Any help will be greatly appreciated.Not exactly true. As absurd as it sounds, if you have just one music track in your playlist, then you can select it from the Playlists section on the iPhone and play your videos, movies etc. one after the other.
I have created a completely empty music track in Garageband which I drag onto the end of each and every video playlist I create. An ugly solution, but it works.
You have to remember to check the playlist in both the Video and Music sections in iTunes->Devices->Your iPhone. -
How to create search path for the file on the desktop..
hello experts..
I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanksHI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
EXPORTING
MASK = u2019,.txt,.*u2019
STATIC = u2019Xu2019
CHANGING
FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = u2019 u2019
IMPORTING
file_name = LV_FILE.
Regards
Pavan -
How to create an Invoice for the sales order using the T-Code VF01
Hello Experts,
How to create an Invoice for a sales order using the T-Code VF01?
Thanks in advace,
Sumahi,
Make the following settings-
1. Create sales document and billing type
2. assign billing type in sales document type config VOV8
3. Activate itemcategory as sales order related billing
4. Maintain copy control header and item level between sales order and billing
5. Maintain pricing procedure for sales order and billing
6. Define Output procedure in case to print invoice
Regards
Goutham -
How to create a matchcode for the list of Customers "Group key" KNA1-KONZS
Hi All,
with reference to the creation of "Group key" KNA1-KONZS for Customers,
I'd like to know if is possible to create a matchcode for the list of Customers "Group key" created.
Thanks
GandalfHi
MAINTAIN THE GROUP KEY IN GENERAL DATA ---CONTROL DATA SCREEN
If the customer or the vendor belongs to a group, you can enter a group
key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are
possible.
KNA1-KONZS
Cya
udayakumar -
How to create clean text for the web in Photoshop/Illustrator
I am puzzled to death on how in the world to get clean text for the web in Photoshop/Illustrator, particularly white text. I want my text to turn out exactly like the text at this website: thepainteddoor.org
If you scroll down to the bottom of that page, notice the titles "Featured Media", "Social Networking", and "Contact Information". They are all .gif images. I have tried to replicate what these images look like for about 3 hours now to no avail. Can anyone tell me how to do this? It just looks like a simple outline or drop shadow, but I can't get it to show up like that. If someone could help me replicate that effect with text (aka make it show up clean as an image), I would graciously give them money through PayPal*.
* = I will only give cash if it will replicate it exactly (and I mean exactly)..and it won't be too much..I'm a poor college student. :-P
Thanks in advance!
ThomasYou would do it the way I created it:
Select the Text tool in Photoshop and set the font and parameters as I have listed. Then enter whatever text you like. It will be rendered over the top of the lower layers you may have in the document. Save as an image of the appropriate type and you're there.
Note that "lower layers you may have in the document" could conceivably be none at all (i.e., you render the text over a transparent document). You could imagine saving that as a .png with transparency and get light text in an image that could then be put over the top of anything else. The alpha mixing will see to it that the edges smoothly blend with the background. I haven't actually tried this (I usually do try my own suggestions) because of lack of time right now.
-Noel
Edit: Markerline and I seem to be on the same crystal-controlled wavelength. -
How to create a BADI for the sceanrio
Hi abapers,
I have a scenario as follows.
I create a Transaction where in i put the details of the product and quantity for a particular project's site. The amount gets calculated based on the products unit value and its displayed in net value field. Now the user saves the transaction and a number gets generated. If the net value amount is less than 500 then the user can approve , if its greater than 501 and less than 1500 then a mail should be generated to his superior who is able to approve and ifs amount is greater than 1501 then a mail should be generated to the top of hierarchy who should approve it.
Now the real challenge is if the same project card has more than 1 new request and the amount is less than 500 the user should not be able to approve instead it should generate a mail to his hierarchy for approval since the site has already been exceeded its limit of approval. bcoz earlier 500 and current 400 which will make it to greater than 500.similarly for the hiearchy.How do i go about it.
Now i want to create a BADI on the save event of transaction to check the net value amount as well as check for earlier amounts saved for the particular site.
Any help will be appreciated.
Regards,
Navin .hai navin
r u using ECC 6.0 or 4.7 if 4.7 u can create badi defintiion directly form se18 transaction
and define the interface and its methods , once u define them activate them
and to use in ur code u create an instance of ur badi name
and then use
cl_exithandler=>get_instance method in instance name parameter just pass ur badi name and this will create a badi defintion in ur code, and an oen can implement it
if u r usign ecc6.0 then u can either create new badis usign enhancments or classical badis
for clasical badis just go to menu utilites and create classical badis and follw the sam eprocedure
regards
m.a -
How to create a variable for key figure (value will be entered by the user
I want to create one query, where the user has to entered a max value when the query is started, so that only the query rows will be listed, where the key figure value (integer) of the row is smaller than the max value given.
How can i define that variable which has to start at the begin of the query; and also the restricted key figure iin consideration of the KF variable.
Thanks for helping
Ar.Hi Arnaud,
Go to Conditions-> Right click -> New Condition -> Edit -> NEw -> Selct the KEy figures from the dropdown( the KFs that are used in the rows/columns) -> Select Less than from the operator drop down (less than is for you case) -> Values, there is an option to create a variable -> Select the variable -> transfer. It will appear on the top.
Save & Execute, you will find it in your selction criteria.
Regards
Sunil -
How to create a service for the OHS (Apache 2.0) on Windows?
I've downloaded the Oracle HTTP Server (Apache 2.0) (10.1.3.3.0).
It works also fine with DB 10gR2 and APEX.
But how do I create a windows service for the opmnctl.exe?
Thanks
RalphI've downloaded the Oracle HTTP Server (Apache 2.0) (10.1.3.3.0).
It works also fine with DB 10gR2 and APEX.
But how do I create a windows service for the opmnctl.exe?
Thanks
Ralph -
How to create Search help for the field /SAPSLL/PRGEN-ATTR20V
Hi ,
I need to add a search help for the field /SAPSLL/PRGEN-ATTR20V and their is a chk table used for this field is /SAPSLL/TCOATV20.
In this table /SAPSLL/TCOATV20-ATTRV20V is a Primary key field.
How can I add search help for this field?
Any suggestions will be appreciated!
Regards,
KittuHI,
Fixed on my own..
I am closing this thread!
Thank you!
Kittu -
How to create a file for the file format PDF/A?
I want to create a file,which conform to the standard PDF/A.
when i use InDesign to create a pdf file and export it,i find the file format only support PDF/X,
but i can't find any menu for PDF/A.
who can help me?
thank you !File>Print
Choose Adobe PDF as your printer
Go to Setup
Go to preferences
Choose the standard
Make sure the rest of your settings are correct for the page size etc.
It's a big screenshot so I've linked instead of posting here.
Sorry had to blur out some PDF settings for privacy reasons
http://img339.imageshack.us/img339/6103/37345539.png -
How to creat business process for the user?
Hi
when i use to create message in notif_creat i am getting error message Business partner Neni_SM does not exist
please help me
Regards
NeniProblem : when i use to create message in notif_create i am getting error message Business Partner Neni_sm cannot be the reporter
Admin_sm(Key user)
Neni_sm(sub user)
Neni_sm1(sub user)
Step Followed
1L.ogon to System Admin_sm go to Code:BP
2.When I use to select Display in BP role as Employee
3 required Data filled in address tab
4.In Identification tab I can only c subtab
Employee data:
Personnel number
User Name:neni_sm
5.When I use to select Display in BP role as Employee in cfloders
Employee data:
Personnel number
User Name :neni_sm
Identification number
External BP number :<SID>< installation number of the system>only this 2 r possible
Now problem is When I logon to Neni_sm(sub user)system create message in notif_creat i am getting error message <b>Business Partner Neni_sm cannot be the <u>reporter</u></b>
<b>Requirement</b>: I have to give access to create message for the following user Neni_sm(sub user)
Neni_sm1(sub user)
Where I have already created user: neni_sm and also roles
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_CREATE
SAP_SUPPDESK_DISPLAY
SAP_SUPPDESK_PROCESS
Please help me
Regards
Neni
Maybe you are looking for
-
I have this method: string filename = ""; private void GetHtmls() for (int i = 0; i < numberofforums; i++) uri = sourceUrlId + forumsIds[i] + sourceUrlNumber + 1; filename = uri.Substring(49); webBrowser1.Navigate(uri); And in the document completed
-
Mavericks (10.9.1) crashes & freezing
Hi, 1 time for week my iMac (27 i5 2,9GHz, 8GB RAM, nVidia GeForce GTX 660M e Fusion Drive) FREEZE and i must RESTART !!! Here the log of today, from few minutes before the CRASH to the REBOOT: 30/01/14 12:14:55,094 icbaccountsd[3229]: -[ICBLocalDict
-
Small Line of Unavailable Screen at Bottom of 11.6" MacBook Air
Does anyone notice on their 11.6" MacBook Air that at the very bottom of the screen there is a small line that applications don't fill when maximized? I always thought it was supposed to be like this because it was the same on every application, but
-
Uploading photos to online print companies
I upload lots of photos for printing from iPhoto to various online printing companies, mainly photo box. They use an aurigma uploader. I have installed Lion and despite having reinstalling the java as requested I can no longer drag and drop files in
-
Yesterday I downloaded the newest version of iTunes. I now cannot 'click
Yesterday I downloaded the newest version of iTunes and now I cannot 'click & drag' songs from iTunes to GarageBand. I could do this the day before, but not with the new version of iTunes. Any ideas?