How to create a group that is visible in workspace

I would like to assign a task to group "Test". However, I get an "invalid principal exception" when I do so through the assign task process.
My group "Test" is set up with "workspace user".
I have added "user 1" to the group. User1 has the "workspace user" role.
When I log into workspace with User 1, the group "Test" is not visible on the left pane. I think this is my issue, but not sure how to solve.
Jeremy

Similar Messages

How to create a group calendar?

Hello,
i am sorry but this is one more question on wiki-group-calendars.
*In short:*
I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
LONG:
I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
+"The web calendar allows you to easily schedule events for yourself or your group. ...+
+There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
+The web calendar uses iCal Server to store events and invitations. ..."+
But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
Thanks, Philipp.
10.6.4 OSX Server
10.6.x Clients

farmer tan wrote:
you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
migrated from 10.5.7 to 10.6
Message was edited by: farmer tan
Could you be more specific farmer tan, please?
You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
Thanks in advance for any help you can provide.

How to create a group mailing list in JavaMail?

Hello,
I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
Thanks in advance!

Hi:
I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
Best regards,
Fabio Galarraga.

How to create a group including several roles?

Hi experts,
Hereby a simple question but urgent, that is, how to create a group in portal which includes several roles. For exemple a group for manager contented the roles for managers and another group for employees. Thus it simplifies the role assignment for any user.
Thanks and with great appreciations

Hi! wuyia,
to create a group and assigining the roles to the group, you will need the userAdministrator role in the portal.
1.Go to userAdministrator role.
2.click on group workset and create a new Group
3.click on Role workset and search the role which you want to assign to the group.
4.edit the role and add your group to this role.
5.click on save button.
regards,
Mithilehwar

How to create a group.

Hello All,
how to create a group in web dynpro for Abap.
Thanks and regards,
Lisa.
Message was edited by:
Lisa Roy

If so, you can simply right click on the ROOTUILELEMENTCONTAINER node of the UI elements tree in the top right hand corner of the Layout Tab, and choose Insert Element. From the dialog, give the name and then choose Group from the listbox. That's it.
Regards,
Rich Heilman

How to create a group using photoshop scripting?

Hey guys,
I can create a layer easily by the below code.
but how can i create a group that contain more than one layer.
var docRef = app.documents.add();
var myLayer = docRef.artLayers.add();

Here is an example..
var doc = app.documents.add();
var newLayerSet = doc.layerSets.add();
var myLayer = doc.artLayers.add();
var myLayer2 = doc.artLayers.add();
//move the layers into the layerset
myLayer.move(newLayerSet, ElementPlacement.INSIDE);
myLayer2.move(newLayerSet, ElementPlacement.INSIDE);

How to create a group from an email distribution list

Hi,
I've searched around and could not find this question asked or answered. It's this:
I get an email containing a very large distribution list. I have some of these names in my address books but many I do not.
I need to send out emails to this same distribution list that is not a 'reply all". What I'd like to do is easily highlight the names and create a group that I can then send emails to in the future.
Right now it seems that the only way to do this is to create a contact for each and then drop each one into a new group that I create. Seems quite tedious.
Anybody know how to get this done? I'm hoping for a magical highlight all the names, right click, select 'new group", name new group and presto: done. All the email addresses would now be in contacts along with the new group.
Thanks for your help.

There was a "magical" set of Applescripts that would have done that, but it no longer works.
There is no way in the OS to do that besides making the Applescript yourself using the current Script Editor.
Another way to do what you want is to select all of the addresses (select one, then cmd-A). Then, drag the selection to somewhere in the Finder. That will create a text clipping. You can then drag that text clipping into the address field in Mail.
The text clipping will be named with the first few email addresses. You can rename it in the Finder.
Each one can be your own "distribution" list.

How to create a grouping function

How to create a grouping function ?? For example, can I create a function:myavg and I can use it like :
select col_a, col_b, myavg(col_c)
from table_a
group by col_a, col_b
Thanks in advance !!
null

I don't think that you can create a grouping function in Oracle, but you can create a function and use it in Select statments.
null

CO-PA - How to create a group in tx KEU5

Hi every one.
Anybody could explain me how to create a group or characteristics set for assessment cycle in CO-PA??
Please I appreciate any help.
Tnks

*Thanks for your help, when I'm using the tx GS01 in the selection, for create a group for characteristic Route*
*Table: KGALK*
*Field Name: SETID*
*The system shows the following message of error:*
You cannot create a set because the field is >24 characters long.
Message no. GS083
Diagnosis
You tried to choose a field (SETID) to be used for a set which has a field length of more that 24 characters in the repository. The allowed maximum field length for a set field is 24.
System Response
You cannot create this set.
I need to know that as is the tables and the name of the fields for creates the groups for the typical route and material
Thanks for your help.

How to create master group in Portal - Segment Builder?

Hi All,
May i know how to create master group by using existing target group in segment builder PCUI in portal?
I manage to do it in sapgui:
tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
Can guide me on this?
Appreciated your guide. Thanks.
Regards,
wyee

Hi All,
May i know how to create master group by using existing target group in segment builder PCUI in portal?
I manage to do it in sapgui:
tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
Can guide me on this?
Appreciated your guide. Thanks.
Regards,
wyee

How to create public group in office 365 admin panel?

Dear Microsoft ,
I try to create group in office 365 admin panel but in that group when i add outsider mail id eg([email protected],[email protected]) is not created ...it's showing error.Can please help me to how i create public group in office 365 ?

Hi,
Which error message does it show?
Based on my research, internal users (users that have a mailbox in your organization) and external users (people that don’t have a mailbox in you organization) can be added as members of a distribution group. However, only external users
that have been added to your organization’s address book (also known as shared contacts), can be members of a group. For information about how to add external users to your organization’s address book, see
Create and use shared contacts.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

How to create user groups in portal

Hi
I am new to portal..can any one explain how to create a group and add the users to that group.
Thanks
Rahul

Hi
Go to "user administration"-> Identitiy management place "Groups" in the Search Criteria then you will see the options for creating NEw Group
at the time of Group creation there is a tab for Assigned users from there you can add users.
Or you select the user name and click on modify and select Assigned groups and assign your group.
Regards,
Mahesh

How to create checkbox group and table dynamically?

HI All
How to create checkbox group and table dynamically?
Regards
Ravi

hi
check this links for creating tables dnamically
How to Create a table dynamically?
Re: how to create a table dynamically in webdynpro
and for checkboxgroup
IWDTransparentContainer rootContainer =
(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDCheckBox check = (IWDCheckBox)view.createElement(IWDCheckBox.class,"Check"+k);
//Here "check"+k k represents a unique value every time u create so that u wont get a duplicate instance
check.setChecked(false);
rootContainer.addChild(check);
or Re: adding checkboxes dynamically

If I want to create a Group that is Group by page,Is that feasible?

Hi, Expert
I want to limit record number(50 records) per page,
and it will have a total column which is amount Salary,
so now I had set some formulas into report
First(in report Details)
WhilePrintingRecords;
Global   numbervar   DataCount   :=   DataCount   +   1;
ps.This variable counts record number and limits record within 50 records per page
   when record passover 50, it will re-set variable to 0(this formulas set in Group Footer)
second(in Group Footer)
WhilePrintingRecords;
   Global numbervar DataCount := 0;
ps.for re-set variable
third(New Page After)
Truncate ({@DataCount}/50)*50={@DataCount} and OnLastRecord=false
ps.For Next page
Fourth
WhilePrintingRecords;
Global numbervar pagetol;
   salarytol:=salarytol +{table;1.amount}
Fifth
Global numbervar pagetol;
if (Truncate ({@DataCount}/50)*50)={@DataCount} then
   pagetol:=0;
If I want to create a Group that is Group by page(50 records per page), because I want
to grand total of salary per page,Is that feasible?
How to achieve this goal??
Thanks & Regards

Thanks lanWaterMan
Actually, my care is Report View,
my report will have Three Summary columns,
one is for 50 records,
second is for data type,
another is for all of records.
I will put the First Summary column behind(below) the last records
So it will look like "Grand total"(for 50 records 1 total).
And the Second Summary column will lay on Group footer(sum data group by data type).
And the last Summary column will lay on every page's bottom(sum all of data).
If I put first summary column in page footer, It will lay on bottom of page, not behind the last records(per fiftieth record).
So I think if I create group1 for 50 records(put in first Summary column on group1 footer) and group2 for data type(put in second Summary column on group2 footer),
then put the last summary column into page footer. Maybe, it will look like what i want.
Thanks & Regards

How to create a form that will allow the applicant to upload their photo

I have Adobe Acrobat 9 Pro Extended and I know how to create forms that require text input.
How to create a form that will allow the applicant to upload their photo? I alo wish to know how to upload a photograph so that I can test the form I created.
Thank you
Adrian Watts

test@ORA10G> with x as (
2    select '234-1111' as customer, to_date('2-Jan-2008','dd-Mon-yyyy') as call_date, 'Order product' as reason from dual union all
3    select '234-1132', to_date('3-Jan-2008','dd-Mon-yyyy'), 'Request info' from dual union all
4    select '231-1154', to_date('4-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
5    select '234-1111', to_date('2-Nov-2007','dd-Mon-yyyy'), 'Order product' from dual union all
6    select '234-1132', to_date('9-Jan-2008','dd-Mon-yyyy'), 'Request info' from dual union all
7    select '231-1154', to_date('9-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
8    select '234-1111', to_date('5-Dec-2007','dd-Mon-yyyy'), 'Order product' from dual union all
9    select '234-1131', to_date('7-Dec-2007','dd-Mon-yyyy'), 'Request info' from dual union all
10    select '231-1154', to_date('1-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
11    select '234-1111', to_date('8-Jan-2008','dd-Mon-yyyy'), 'Order product' from dual union all
12    select '234-1131', to_date('3-Dec-2007','dd-Mon-yyyy'), 'Request info' from dual union all
13    select '231-1154', to_date('4-Nov-2007','dd-Mon-yyyy'), 'Forward to Sales' from dual)
14 --
15 select customer,max(call_date), reason
16 from x
17 where reason = 'Request info'
18 group by customer, reason;
CUSTOMER MAX(CALL_ REASON
231-1154 09-SEP-07 Request info
234-1131 07-DEC-07 Request info
234-1132 09-JAN-08 Request info
test@ORA10G>
test@ORA10G>pratz

How to create a group that is visible in workspace

Similar Messages

Maybe you are looking for