How to create a HTML Table in Workflow Notification ?

Hi,
I have a requirement to display multiple records in a HTML table in Workflow Notification. I have developed the code. In my Notification, I am seeing HTML tags and not a formatted HTML report. Appreciate your help and comments.
The following is what I have done in WF.
1. Define attribute in WF of type Document
2. Define Message in Text Body ( Should i also copy the same thing in HTML Body ??)
The following is my PL/SQL
Variable l_table is defined as varchar2(30000)
-- HTML Table Heading
l_table := '<table><tr><td>Amount</td>
<td>Description</td>
<td>Type 1099</td>
</tr>';
WF_ENGINE.SetItemAttrText(itemtype,
itemkey,
'FRB_DISTRIBUTION_HISTORY',
l_table);
When I get a notification, I get the following sample
<table><tr><td>Amount</td>
<td>Description</td>
<td>Type 1099</td>
<td>Receipt Required Flag</td>
<td>Invoice Id</td>
<td>Invoice Distribution Id</td>
</tr><tr><td>100</td>
<td></td>
<td>MISC7</td>
<td></td>
<td>429684</td>
<td>464834</td>
</tr></table>
I am missing something, Can you please let me know, what am i missing.
Kiran

Hi Matt,
I am working on AP_WFAPPROVAL_PKG (Oracle EBS Invoice Approval Package).
I have defined a Workflow Attribute as Type 'Document' (in Workflow Builder)
In my AP_WFAPPROVAL_PKG Package, I am retrieving my values and returning it to a variable of type varchar2(32000) and seting the WF variable(displayed below).
WF_ENGINE.SetItemAttrText(itemtype,
itemkey,
'FRB_DISTRIBUTION_HISTORY', -- This is my WF Attribute of type 'Document'
l_table);
When I see the notification, i get the format displayed below (I do see the correct values generated, but they appear as tag, and not as a HTML Table Report)
<table><tr><td>Amount</td>
<td>Description</td>
<td>Type 1099</td>
<td>Receipt Required Flag</td>
<td>Invoice Id</td>
<td>Invoice Distribution Id</td>
</tr> <tr><td>60</td>
<td></td>
<td>MISC7</td>
<td></td>
<td>429681</td>
<td>464827</td>
</tr><tr><td>40</td>
<td></td>
<td>MISC7</td>
<td></td>
<td>429681</td>
<td>464828</td>
</tr>
Please advise
Kiran

Similar Messages

  • How to Create Event polling table

    hi,
    1)How to Create Event polling table
    2) wahts RPD stands for.
    3) when we are prefer Dynamic variables.
    thanks.
    raj

    1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
    2) Repository Project Design ?
    - More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
    3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

  • I want to create an HTML table of img maps dynamically from DB retrieves...

    Hi,
    How do I build dynamic HTML code in a function and then populate a HTML region to render it.. (did I say that right?)
    I want to create an HTML table of img maps dynamically from DB retrieves...
    Thank you, Bill

    Vikas and Andy,
    Using Andy's code I'll go further...
    I want to create a function that returns HTML code that has been built dynamically.
    create or replace function "GET_CH_TABLE"
    return VARCHAR2
    is
    HTML_STRING VARCHAR2(2000); -- Create a string variable
    BEGIN
    HTML_STRING:= '<table align="center">' ||chr(10)||
    ' <tr>' ||chr(10)||
    ' <td> TEST ' ||chr(10)||
    ' /td>' ||chr(10)||
    ' /tr>' ||chr(10)||
    ' tr>' ||chr(10)||
    ' td>' ||chr(10)||
    ' a href=https:// ............etc. etc.. building the <TABLE> and <TD> cells having whatever I want... example.. changing the name of an image dependant on something else..
    return HTML_STRING; -- output the string to the region
    --also tried htp.p(HTML_STRING);
    END;
    =====================================
    Building the dynamic HTML is not my problem. It is how to get it into a region and to be read as HTML from a function call...
    I'd like the source of the region to be the returned HTML from a function call to GET_CH_TABLE();
    but it gives error:
    ORA-06550: line 1, column 7: PLS-00221: 'GET_CH_TABLE' is not a procedure or is undefined
    ORA-06550: line 1, column 7: PL/SQL: Statement ignored
    Debug:
    1: begin
    2: GET_CH_TABLE();
    3: end;
    I

  • How to create a booking table (make online reservation)

    Hi everyone,
    I'm just wondering if any of you know how to create a booking
    table, like a booking seat for an airplane... I have to do the
    booking table as I'm doing a Japanese Restaurant website for my
    project.. At the moment, I'm using PHP, MySQL and HTML..
    Could anyone help me, please?
    Cheers,
    Nova

    You first need to check with your host to see which type of
    server side
    scripting language they support. If they support PHP, try,
    http://www.jellyform.com/
    Shane H
    [email protected]
    http://www.avenuedesigners.com
    =============================================
    Blog:
    http://avenuedesigners.com/blog/
    Web dev articles, photography, and more:
    http://sourtea.com
    =============================================
    Proud GAWDS member
    http://www.gawds.org/showmember.php?memberid=1495
    Delivering accessible websites to all ...
    =============================================
    "mastacraft" <[email protected]> wrote in
    message
    news:f3pote$d16$[email protected]..
    > Hello,
    >
    > I need to create a booking form for a website- So wen
    they fill out form
    > for
    > bookings. Should have tab for club appearance. Magazine
    ads. Etc It needs
    > to
    > lead to this email : [email protected]
    >
    > I'm really not sure how the best way is to do this, i
    understand it's
    > probably
    > a really simple process.
    >
    > Regards,
    >

  • How to create the custom table?

    Hi, how to create the custom table and how to integrate the table with defferent R/3?
    my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
    Tks
    DPk

    how to create the custom table
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach.
    Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
    3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
    how to integrate the table with defferent R/3
    Transport the Table to the another server/client/qas/prd
    Kanagaraja L

  • How to create a temp table in the memory, not in disk?

    in sql server, you can create a temp table in the memory instead of disk,
    then you can do the insert, delete,update and select on it.
    after finishing, just release it.
    in Oracle,
    I am wonderfing how to create a temp table in the memory, not in disk?
    thanks,

    Thanks for rectifying me Howard.
    I just read your full article on this too and its very well explained here:
    http://www.dizwell.com/prod/node/357
    Few lines from your article
    It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
    Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they don’t swamp themselves, and start causing each other to age out back to disk.
    Thanks and Regards

  • How to create variant for table/view ?

    Hi,
    When I go through SM30, I find a radio button called variant. I don't know the effect.
    Can anyone tell me how to create variant for table / view ?
    I want to know when we need to create variant for table/view.
    Best regards,
    Chris Gu

    hi ,
    Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
    For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
    If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
    Procedure
    To create a new variant:
           1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
           2.      On the variant maintenance initial screen, enter the name of the variant to be created.
    Note the naming convention for variants (see below).
           3.      Choose Create.
    If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
           4.      If there is more than one selection screen, select the screens for which you want to create the variant
    5.      Choose Continue.
    The (first) selection screen for the report appears.
    If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
           6.      Enter the desired selection values, including multiple selection and dynamic selection.
           7.      Choose Continue.

  • HOW TO create a temp table or a record group at run time

    i have a a tabular form and i dont want to allow the user entering duplicate
    records while he is in insert mode and the inserted records are new and not exsisting in the database.
    so i want to know how to create a temp table or a record group at run time to hold the inserted valuse and compare if they are exsiting in previous rows or no.
    please help!

    As was stated above, there are better ways to do it. But if you still wish to create a temporary block to hold the inserted records, then you can do this:
    Create a non-database block with items that have the same data types as the database table. When the user creates a new record, insert the record in the non-database block. Then, before the commit, compare the records in the non-database block with those in the database block, one at a time, item by item. If the record is not a duplicate, copy the record to the database block. Commit the records, and delete the records in the non-database block.

  • HOW TO CREATE  and  USE EVENTS IN WORKFLOWS .

    HOW TO CREATE  and  USE EVENTS IN WORKFLOWS with the help of classes.
    What i am doing is..
    open se24
    event tab->event name->parameters
    method tab->method name->event handler->copy parameters
    interface tab->if_workflow->enter
    tell me what else to do step by step
    Another important thing is that HOW to use these class events to trigger the workflows.
    REPLY ASAP
    THXS IN ADVANCE

    Hi,
    Pl. see this blog...
    Raising ABAP OO events for workflow
    Regards,
    JOy.

  • How to create business operation for starting workflows

    How to create business operation for starting workflows from worklist?
    When I call methods that implements business operation from java class everything
    works fine(wlpi-ejb.jar is required), but when I call business operation from
    Studio I can't use classes from wlpi-ejb.jar.

    Business operation is called by WLIS. So, I include wlpi-ejb.jar into WLIS classpath.
    Studio uses deployed EJB from wlpi-*.jar, I don't know why Studio doesn't see
    methods from deployed EJBs when WLIS classpath contains wlpi-ejb.jar.
    "Andrew Pitonyak" <[email protected]> wrote:
    >
    When studio starts, what is your classpath? If you use the included batch
    file to start it, then your class path may not include this :-)
    Andrew
    "Raul" <[email protected]> wrote in message
    news:[email protected]..
    How to create business operation for starting workflows from worklist?
    When I call methods that implements business operation from java classeverything
    works fine(wlpi-ejb.jar is required), but when I call business operationfrom
    Studio I can't use classes from wlpi-ejb.jar.

  • How to create a new table based out of old data rows

    Hi All,
    How to create a new table based out of old data rows. Also how can we find out the DBF for different users in a database?
    Saqib

    Not very clear what you need. I'll try to interpret...
    How to create a new table based out of old data rowsIf this means how to create a table from an existing one, then you can do :
    SQL> create table <new table> as select * from <old table>;
    if you need a subset of rows you can add a where clause.
    how can we find out the DBF for different users in a database?Here I need some more clarification. What do you mean exactly ?

  • How to create database and table with GUI?

    How to create database and table with GUI?
    for linux can do that?
    or have only way to create table by use sql*plus.
    everyone please help me.
    thanks

    go to www.orasoft.org
    here is a gui tool.
    null

  • How to create a dynamic table were the JTable columns keep varying

    How to create a dynamic table were the JTable columns keep varying based on the input to the jtable

    Oooh, I lied. DefaultTableModel has an API for adding and
    removing columns. I didn't know that. You should have read
    the API.
    As for preferring to extend AbstractTableModel rather than
    DefaultTableModel, I think it's more correct. DefaultTableModel
    is a simple implementation of Abstract for basic cases. It isn't
    intended to be extended. I figure most people extending
    DefaultTableModel are also extending JFrame, JPanel, and Thread
    instead of encapsulating the first two and implementing
    Runnable for the third.

  • Step by step on how to create organizational structure(plan) for workflow?

    Hi Experts,
    Can anyone send me a step by step process on how to create organizational structure(plan) for workflow?
    Thanks a lot in advance.
    Rgds,
    TM

    Hi,
    You can use the following accessible transactions to process your organizational plan:
    Transaction     Name of Transaction
    PPO5                     Change Attributes
    PPO6                     Display Attributes
    PPOCE                      Create Organization and Staffing
    PPOCW                      Create Organization and Staffing (WF)
    PPOME                     Change Organization and Staffing
    PPOMW                     Change Organization and Staffing (WF)
    PPOSE                      Display Organization and Staffing
    PPOSW                      Display Organization and Staffing (WF)
    PP01                      Maintain Plan Data (Menu)
    PP01_DISP      Display Plan Data (Menu)
    PP03                       Maintain Plan Data (Actions)
    PP03                       Execute Action Directly
    Regards,
    Deepa Kulkarni

  • How to create the fact table

    pleae let me know how to create the fatc table by using pl/sql packages
    Edited by: 792988 on Sep 6, 2010 3:34 AM

    Please let us know something about your fact table.
    There's no create_fact_table() procedure that could satisfy everybody.

Maybe you are looking for