How to create a hypertext in SAP script
Hi All,
I want to create a hypertext in SAP script.I read 'Creating hypertext in SAP script' posted on www.sdn.sap.com, but I am not able to get desired output.Kindly suggest the soloution.
Regards,
Pranjali Silimkar
Hi,
I read the document 'Creating hypertext in SAP script' posted on the link 'http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingHypertextinSAPScripts', but I am not able to get the desired output.It is displaying the same text again on the same page which is not the desired output.Kindly suggest me some solution.
Regards,
Pranjali Silimkar
Similar Messages
-
HOW TO CREATE A VARIABLE IN SAP SCRIPT
HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears -
Sap script '' how to create table frame in sap script"""
i have some problem in sap script'' how to create table frame in sap script"""
Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar. -
How to create table in the sap script
Hi,
How to create a table in the sap script layout, i Have to use table in the main window with 7 columns. can any one send sample code.
How to calculate the number of line items which are displaying in the main window, if the number of line items are exceed in the main window then the amount has to be calculate and print as "BALANCE FORWARD" and the next page had to be displayed as "CARRY FORWARD" that amount. if this is the last page not subsequent page the amount had to be calculated the carry forward amount and total amount and print as "TOTAL AMOUNT". i am creating the new layout and the program is the standrad driver program i have to use and i have to use the standard Text elements only, can any one help me on this issuehi
good
there is no "pattern" option in SAPscript. All you have at your disposal are the following SAPscript commands: BOX, POSITION and SIZE. Not only are these commands both confusing and tedious to implement, they also are limited in what they can achieve. For instance, although you can suppress a box during printout (by making it conditional), there is no simple way to adjust it dynamically instead. Thus, to divide sequential line items, you may wish to use an underline (ULINE) or simply white space.
thanks
mrutyun -
How can create a table in sap script?
Hi,
How to create a table in the sap script.i Have to use table in the main window with 11 rows and 3 columns. can any one send sample code. Any ideas?¿
THKS 4all.Try and check on the below logic....
1. write -
2. write headings with '|' at start and end as well as the field separator.
3. write -
4. similar to step two write the data with pipe separators.
5. write -
regards
Anurag -
How to create new page in SAP Script?
Moved to correct forum by moderator. Duplicate deleted. Do NOT post the same question in two forums.
Hello friends,
I am modifying one SAP script.
It is already contains 2 pages. FIRST and NEXT.
All I have to do is to create one more page which should be display as last page.
And this last page should display some data.
I tried and created a new page in SE71 but when i execute the program, it doesn't show newly created (LAST) page.
Please guide me.
REgards,
RH
Edited by: Matt on Nov 7, 2008 4:26 PMHi
U need to force the call of this new page.
I suppose your sapscript is arrange with 2 page: FIRST and NEXT, where FIRST has NEXT as next page.
So the system automatically print the pages FIRST and NEXT: u need to insert the statament:
/: NEW-PAGE LAST
in the MAIN window.
U can create a text element NEW_PAGE and you'll call it as soon as you've finished to print the main data:
/E NEW_PAGE
/: NEW-PAGE LAST
U can use the fm CONTROL_FORM
Max -
How to create a box in sap script n footer
Hi,
I am working on a Sap Script in which i have to display a box having the decision of crt profile and i don't know how to display it. It is clear that it is to be displayed in the footer of it and the code for that decision is coming from the program.
plzz provide me guidelines as how to solve this problem.To draw a box, try this syntax.
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
example:
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.18' MM INTENSITY 100.
/: POSITION XORIGIN '11.21' MM YORIGIN '5.13' MM.
/: SIZE HEIGHT '120' MM WIDTH '90' MM.
Regards,
Joan -
How to create box in the sap script.
I have a address like
SAP America,
Pala alto,Ca
USA
I want to put the above address in the box in sap scritp.
How to do it .
Please let me know.
Any help would be highly appreciated.
Thanks
Edited by: mark_yellow mark on Jul 8, 2008 1:54 AMHi Mark,
If u you what to display the window with a box thw u can simply write this way
/: BOX FRAME 10 TW
You can use the POSITION and SIZE commands to set default parmeters for a box.
You can write:
/: POSITION XORIGIN '11.21' YORIGIN '5.31' MM
/: SIZE HEIGHT '2' MM WIDTH '76' MM
/: BOX FRAME 10 TW INTENSITY 10
This can be usefull if you gave several boxes that share the same parameters.
If you want to set the position realtively to the window use POSITION WINDOW
to set the position to the top/left start of the window. Then use POSITION
to set the current position relatively to the start of the Window.
Note that you uses "+" or "-" in the ORIGIN position to the set the position relatively.
/: POSITION WINDOW
/: POSITION XORIGIN '+5' MM YORIGIN '+10' MM
the position is now 5 MM from the left and 10 MM from the top of the window
Drawing a line. You can draw a line by setting the Height or Weidth to 0
and add a frane. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
Best regards,
raam -
Create new window in SAP Script
Dear All
how to create new window in sap script
Regards
Suresh
Edited by: Alvaro Tejada Galindo on Apr 9, 2008 11:58 AMHi,
To create a new window in scripts.
1. After opening the form in SE71 Click on Windows push button.
it will gives a screen list of windows in a page
2. Click on Edit option in menu bar in Edit-->Create Element click it will gives a popup window in the window give Name of the window and short description press enter like that you can create windows in a page
3. Click on Page windows it will gives a screen where that window you want to place in that page. Click on Edit option on menu bar Edit-->Create Element
it will gives a list of windows which your created in a page here you have to select which window you want to place. Double click on that window it will adds on the page and give the bottom of the screen you can find standard attributes block
there you have to give the position of the window in a page.
or
Click on setting option on menu bar settings-->form painter
it will gives a GUI editor here you can drag the window position it is easy to use.
then you can see the layout.
Thanks
Ganesh -
How to print last page in sap script in ladscape format?
Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
PravinHi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam -
How to print Vertical barcode in SAP script
I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay. -
How to use Standard text in SAP SCRIPTS
Hi all,
Please tell me how can we use the standard text what we have created in SO10 with sap scripts.Hi Gaurav
You can create standard texts using the transaction SO10. Then to insert these standard texts in the SAPScript choose the menu, Insert->Text->Standard and choose the standard text that you want to choose.
Alternatively, you can display standard texts in your SAP Scripts using the command:
INCLUDE ZSTEXT OBJECT TEXT ID ST LANGUAGE EN
where ZSTEXT refers to the Standard Text name.
Reward pts if found usefull
Regards
Sathish:) -
How to insert the style in sap-script? and in smart form?
how to insert the style in sap-script? and in smart form?
Hi..,
For SAP scripts u need to create them in SE72 ...
and u can include them in the script editor as..
/: STYLE <STYLE-NAME>
P1 text............... (*** P1 is the Paragraph format created in SE72 )
/: STYLE *
For smartforms u need to go for the transaction (tcode) SMARTSTYLES... here u can create paragraph and character formats globally...
<b>Sunil, plz do remember to close all your threads, when ur problem is solved !!</b>
reward all helpful answers,
sai ramesh -
How to insert a logo in sap script?
How to insert a logo in sap script?
Steps to insert a logo,
I
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
II
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
the graphics to be.
III
1 ) create a bmp file in local system
2 )RSTXLDMC FM to upload image in tiff format.
Also check these links...
Logo in SAP SCRIPT
Re: Uploading a (Image) Logo in your Sap Script
Need Urgent Help for Logo Uploading the Sap Script
sap script logo
http://www.sap-img.com/ts001.htm
Regards,
Sakthi Sri. -
How to know print program for SAP Script
Hi friends,
how to know print program for SAP Script form name ?Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
where id = in_tab-value.
if sy-subrc = 0.
read table out_tab index 1.
move scustom-name to out_tab-value.
modify out_tab index sy-tabix.
else.
read table out_tab index 1.
move 'No name' to out_tab-value.
modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
READ TABLE out_par WITH KEY 'NAME1'.
out_par-value = l_name1.
MODIFY out_par INDEX sy-tabix.
endform.
Maybe you are looking for
-
Best Way to Define Employee Numbering For Different Countries
HI all I am working on for a project which will be for Multiple countries.But Each country has different Instances.Now the questions is What could be the Best way to Define Employee numbering for all the Regions ? As for as My knowledge goes It would
-
ITune delete pod casts when syncing
Hi, I download few pod casts on my iPhone and iPad but I don't subscribe them through iTunes. I just use "Get more episodes" link in iPod application. Also in my iTunes I have not selected pod cast sync option. But every time I sync my iPhone or iPad
-
Need Study Guide for OCA exam 1Z0-001
Please suggest me where can I get the study material and previous papers for 1Z0-001 exam.
-
Folders not listed under proper account
First I set up Mail with an IMAP account from Fastmail.fm. The account is listed under INBOX and all the folders I have on Fastmail are properly listed under the account name. Then, I added another IMAP account from Netscape (AOL). This account is al
-
I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!