How to create a invoice with invoice items in SRM?

Hi experts,
I am testing my BW custom code for SRM. My question is I have to create a invoice with line item 1 quantiy 20 in SRM - development. After this I have mark line item 1 with a deletion indicator X in SRM and create two more line items and load it again in BW. This time in BW it should delete line item 1 with deletion indicator X and load the two new line items that I created.
Please tell me the T-code and step by step instructions to create it.
Thanks in advance.
Sharat.

i answered by myself.

Similar Messages

How to create pricing procedure with these items

hello sd gurus,
i am to configure pricing procedure with this items
condition type : Price --> statics
                       cost
                            FOC with tax base
                            FOC with tax
                            profit margin
                        discount
this is for free of charge item...'
is this possible?
thank you very much!

hello sd gurus,
i am to configure pricing procedure with this items
condition type : Price --> statics
                       cost
                            FOC with tax base
                            FOC with tax
                            profit margin
                        discount
this is for free of charge item...'
is this possible?
thank you very much!

How to create excise invoice with reference thorugh credit memo

Hi All,
Please provide any solution for the following qurey:
How to create excise invoice with reference thorugh credit memo

Hi murali,
i am unable to understand your requirement i think there is no like this scenario requirement for any client
if any requirement is there kindly explain detail
cheers

How to create excise invoice with reference delivery document

hi all sd guru
please guide me how to create excise invoice by taking reference of delivery no.
thankx in advance
san

HI
FACTORY SALES
IN CASE OF FACTORY sales you have to create a billing document either Proforma or Commercial.
Then you can reference the billing doc i9n J1IIN for creation
DEPOT SALES
In case of depot sales you can create a excise invoice with reference to delivery document.
For this after creation of delivery goto J1IJ and slect the rg23d from menu
you can create an excise invoice with delivery in depot sales.
In factory it is not possible to create a excise invoice with delivery doc.
regards
Prashanth

How to create Excise Invoice.

Hi SD Guru's
          How to create excise invoice and what is the use of this one and sd point what are the setting required.
Thanks
Rajendra

In Indian Manufacturing scenario, Excise Invoice is required when goods move out of factory premises. The process is as under:
Inquiry / Document type IN
Tcode: VA11,VA12,VA13. tables VBAK,VBAP
Quotation / QT
Tcode: VA21,VA22,VA23. tables VBAK,VBAP
Sales Order OR
Tcode: VA01,VA02,VA03. tables VBAK,VBAP
Delivery LF
Tcode: VL01,VL02,VL03. tables LIKP,LIPS
Billing F2
Tcode: VF01,VF02,VF03. tables VBRK,VBRP
Excise Invoice
Tcode: J1IIN
Configuration of CIN Settings:
1.1 Maintain Excise Registration
 Logistics general  SAP Ref. IMG SPRO Maintain Excise Basic setting India tax on Goods Movements Registrations
1.2 Maintain Company Code Settings
SPRO   Basic settingIndia  tax on Goods Movements Logistics general SAP Ref. IMG   Maintain Company Code Settings
1.3 Maintain Plant Settings
tax on Goods Logistics general  SAP Ref. IMG SPRO   Maintain Plant Basic setting India Movements Settings
1.4 Maintain Excise Groups
SAP Ref. IMGSPRO   Maintain Basic setting India  tax on Goods Movements Logistics general  Excise Groups
1.5 Maintain Series Groups
SAPSPRO  Basic setting India  tax on Goods Movements Logistics general Ref. IMG Maintain Series Groups
1.6 Maintain Excise Duty Indicators
tax on Goods Logistics general  SAP Ref. IMG SPRO   Maintain Excise Duty Basic setting India Movements Indicators
1.7 Maintain Subtransaction Type with Text
India  tax on Goods Movements Logistics general  SAP Ref. IMG SPRO   Maintain Subtransaction Type with TextBasic setting
1.8 Determination of Excise Duty
tax Logistics general  SAP Ref. IMG SPRO   Select Tax Calculation Determination of Excise DutyIndia on Goods Movements Procedure
1.9 Maintain Excise Defaults
SAP Ref.SPRO   Determination of ExciseIndia  tax on Goods Movements Logistics general IMG   Maintain Excise DefaultsDuty
1.10 Condition-Based Excise Determination
tax on Goods Logistics general  SAP Ref. IMG SPRO   Define Tax Code for Condition-Based Excise DeterminationIndia Movements Purchasing Documents
1.11 Condition-Based Excise Determination
tax on Goods Logistics general  SAP Ref. IMG SPRO   Assign Tax Code to Condition-Based Excise DeterminationIndia Movements Company Codes
1.12 Classify Condition Types
SAPSPRO   Condition-BasedIndia  tax on Goods Movements Logistics general Ref. IMG   Classify Condition TypesExcise Determination
1.13 Maintain Chapter IDs
tax on Goods Logistics general  SAP Ref. IMG SPRO   Maintain Chapter ids Master dataIndia Movements
1.14 Assign Users to Material Master Screen Sequence for Excise Duty
SPRO  Master dataIndia  tax on Goods Movements Logistics general SAP Ref. IMG Assign Users to Material Master Screen Sequence for Excise Duty
1.15 Specify Excise Accounts per Excise Transaction
tax on Goods Logistics general  SAP Ref. IMG SPRO   Specify Excise Accounts per Excise Account determinationIndia Movements Transaction
1.16 Specify G/L Accounts per Excise Transaction
tax on Goods Logistics general  SAP Ref. IMG SPRO   Specify G/L Accounts per Excise Account determinationIndia Movements Transaction
1.17 Incoming Excise Invoices
SAPSPRO   BusinessIndia  tax on Goods Movements Logistics general Ref. IMG   Incoming Excise InvoicesTransactions
1.18 Define Processing Modes Per Transaction
 Logistics general  SAP Ref. IMG SPRO   Define Processing Modes Business TransactionsIndia tax on Goods Movements Per Transaction
1.19 Define Reference Documents Per Transaction
tax on Goods Logistics general  SAP Ref. IMG SPRO   Define Reference Documents Per Business TransactionsIndia Movements Transaction
1.20 Maintain Rejection Codes
SAPSPRO   BusinessIndia  tax on Goods Movements Logistics general Ref. IMG   Maintain Rejection CodesTransactions
1.21 Specify Which Movement Types Involve Excise Invoices
Logistics SAP Ref. IMG SPRO   Specify Which Business TransactionsIndia  tax on Goods Movementsgeneral Movement Types Involve Excise Invoices
1.22 Outgoing Excise Invoices
tax on Goods Logistics general  SAP Ref. IMG SPRO Assign Outgoing Excise Invoices  Business TransactionsIndia Movements Billing Types to Delivery Types
1.23 Maintain Default Excise Groups and Series Groups
 Logistics general  SAP Ref. IMG SPRO  Outgoing Excise Invoices  Business TransactionsIndia tax on Goods Movements Maintain Default Excise Groups and Series Groups
1.24 Subcontracting Attributes
tax on Logistics general  SAP Ref. IMG SPRO   Subcontrac Subcontracting Business TransactionsIndia Goods Movementsting Attributes
1.25 Maintain Movement Type Groups
SPRO   BusinessIndia  tax on Goods Movements Logistics general SAP Ref. IMG   Subcontracting SubcontractingTransactions Attributes
1.26 Utilization Determination
SAPSPRO   BusinessIndia  tax on Goods Movements Logistics general Ref. IMG   Utilization Determination UtilizationTransactions
1.27 Specify SAPscript Forms
tax on Logistics general  SAP Ref. IMG SPRO   Specify Excise Registers Business TransactionsIndia Goods Movements SAPscript Forms
1.28 Number Ranges
SAP Ref. IMGSPRO   Number ToolsIndia  tax on Goods Movements Logistics general  Ranges
1.29 Message Control
 SAP Ref. IMG SPRO   Message ToolsIndia  tax on Goods MovementsLogistics general Control
Regards,
Rajesh Banka

How to create an Invoice for the sales order using the T-Code VF01

Hello Experts,
How to create an Invoice for a sales order using the T-Code VF01?
Thanks in advace,
Suma

hi,
Make the following settings-
1. Create sales document and billing type
2. assign billing type in sales document type config VOV8
3. Activate itemcategory as sales order related billing
4. Maintain copy control header and item level between sales order and billing
5. Maintain pricing procedure for sales order and billing
6. Define Output procedure in case to print invoice
Regards
Goutham

How to create an invoice from multiple sales doc.

Hi,
how to create an invoice from multiple sales doc.
thanx,
sourav

hello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards.

How to create collective invoice output

hi frnds
I have created 50 invoices in (VF01). How to create collective invoice output. What is the procedure?
regards

(Assuming you want to print all the 50 invoice)
Use VF31.

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

How to create a table with events in smartforms?

How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)

Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements.

How to create a window with its own window border other than the local system window border?

How to create a window with its own window border other than the local system window border?
For example, a border: a black line with a width 1 and then a transparent line with a width 5. Further inner, it is the content pane.
In JavaSE, there seems to have the paintComponent() method for the JFrame to realize the effect.

Not sure why your code is doing that. I usually use an ObjectProperty<Point2D> to hold the initial coordinates of the mouse press, and set it to null on a mouse release. That seems to avoid the dragging being confused by mouse interaction with other nodes.
import javafx.application.Application;
import javafx.application.Platform;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.collections.FXCollections;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ChoiceBox;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.AnchorPane;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import javafx.stage.StageStyle;
import javafx.stage.Window;
public class CustomBorderExample extends Application {
@Override
public void start(Stage primaryStage) {
AnchorPane root = new AnchorPane();
root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
enableDragging(root);
StackPane mainContainer = new StackPane();
    AnchorPane.setTopAnchor(mainContainer, 5.0);
    AnchorPane.setLeftAnchor(mainContainer, 5.0);
    AnchorPane.setRightAnchor(mainContainer, 5.0);
    AnchorPane.setBottomAnchor(mainContainer, 5.0);
mainContainer.setStyle("-fx-background-color: aliceblue;");
root.getChildren().add(mainContainer);
primaryStage.initStyle(StageStyle.TRANSPARENT);
final ChoiceBox<String> choiceBox = new ChoiceBox<>(FXCollections.observableArrayList("Item 1", "Item 2", "Item 3"));
final Button closeButton = new Button("Close");
VBox vbox = new VBox(10);
vbox.setAlignment(Pos.CENTER);
vbox.getChildren().addAll(choiceBox, closeButton);
mainContainer.getChildren().add(vbox);
    closeButton.setOnAction(new EventHandler<ActionEvent>() {
      @Override
      public void handle(ActionEvent event) {
        Platform.exit();
primaryStage.setScene(new Scene(root, 300, 200, Color.TRANSPARENT));
primaryStage.show();
private void enableDragging(final Node n) {
   final ObjectProperty<Point2D> mouseAnchor = new SimpleObjectProperty<>(null);
   n.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(new Point2D(event.getX(), event.getY()));
   n.addEventHandler(MouseEvent.MOUSE_RELEASED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(null);
   n.addEventHandler(MouseEvent.MOUSE_DRAGGED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        Point2D anchor = mouseAnchor.get();
        Scene scene = n.getScene();
        Window window = null ;
        if (scene != null) {
          window = scene.getWindow();
        if (anchor != null && window != null) {
          double deltaX = event.getX()-anchor.getX();
          double deltaY = event.getY()-anchor.getY();
          window.setX(window.getX()+deltaX);
          window.setY(window.getY()+deltaY);
public static void main(String[] args) {
launch(args);

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

How to create a contract with one supplier and two dealers?

Hi Gurus,
I have a contract with a supplier (eg. Apple), but the products and services are supplied by two dealers.
The supplier is the manufacturer and with whom the negotiation of prices is made.
The dealers are those who make the delivery of the products and services and who the payment is done.
How can I create a contract with these characteristics in SRM 7.0?
I don't want to create two contracts with same products and services for two suppliers (Dealer_1 and Dealer_2).
How can this be handled through business partner type "Vendor"?
In "Partner" section in "Header" --> "Basic data", I can only add 1 vendor.
The system is:
Component software: SRM_SERVER
Release: 700
Level: 0008
Support package: SAPKIBKV08
Thanks in advance and best regards,
Alonso Valenzuela

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using BAPI_CUSTOMERCONTRACT_CHANGE. The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

How to create shipment document with out inbound delivery document

Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
Lakshmikanth

Dear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali.

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

How to create a invoice with invoice items in SRM?

Similar Messages

Maybe you are looking for