How to create a JMS standalone client with SAS PE8.2 ?

HI everyone,
I use Creator2.1 and I want to write a JMS standalone client that communicate through JMS with a webapp built with Creator.
My pb is that I dont know how to set up initialContext.
Hashtable env=new Hashtable();
env.put(Context.PROVIDER_URL, "mq://localhost:28676/jms");
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.enterprise.naming.SerialInitContextFactory");
context = new InitialContext(env);
factory = (TopicConnectionFactory) context.lookup(factoryName);
For example this code doesnt work and I have the following exception when I try to run my client.
29 sept. 2006 10:31:03 com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
ATTENTION: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2257)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2278)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:208)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:221)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:104)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:146)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:286)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.enterprise.naming.SerialContext.narrowProvider(SerialContext.java:89)
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:128)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:288)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.orange.clara.Main.main(Main.java:59)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:336)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:191)
... 12 more
Caused by: java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:464)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:320)
... 13 more
Does anyone had already met this pb ?
Regards
R�gis

Please refer to http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6377822, particularly the evaluation. Could your situation be the same too (i.e server ip address changing dynamically)? Also, which OS are you using and do you have any firewalls setup that prevents access to port 3700?

Similar Messages

  • How to develope a XML-RPC client with PL/SQL

    Anyone know how to develop a XML-RPC client with PL/SQL?
    I've oracle 8i.
    Have you some example of code?
    Thanks
    Paolo

    So, you actually want to create the physical directory using JAVA?
    Then see:
    http://www.oracle-base.com/articles/8i/shell-commands-from-plsql.php

  • How to create OEMS JMS In-Memory and File-Based Persistence?

    Anyone knows how to create OEMS JMS In-Memory and File-Based Persistence? Any help it is appreciated. I m working with Oracle BAM 11g TP4 and I want to test the capability of connecting directly to a JMS queue, and reading Oracle´s "complex" documentation I couldnt find the right way to make this happen.
    tks

    Hi Mario
    This is explained in the soa developer's guide. Chapter 43 "Enterprise message source"should help you. You will find how to connect OEMS or JMS in-memory/file based to your BAM data objects with or without xpath transformation.
    You can find sample of advanced XML formating in the 10g tech note: "Oracle BAM 10.1.3 configuration for BPEL 10.1.2 using JMS sensors" (useful even if you don't plan to use BPEL).
    Anyway, if you plan to use BPEL, forget JMS and use the BAM adapter (chapter 42), it's quicker & easier.
    Dominique

  • How to create OEMS JMS In-Memory and File-Based Persistence ? Anyone?

    Anyone knows how to create OEMS JMS In-Memory and File-Based Persistence? Any help it is appreciated. I m working with Oracle BAM 11g TP4 and I want to test the capability of connecting directly to a JMS queue, and reading Oracle´s "complex" documentation I couldnt find the right way to make this happen.
    tks

    Hi Mario
    This is explained in the soa developer's guide. Chapter 43 "Enterprise message source"should help you. You will find how to connect OEMS or JMS in-memory/file based to your BAM data objects with or without xpath transformation.
    You can find sample of advanced XML formating in the 10g tech note: "Oracle BAM 10.1.3 configuration for BPEL 10.1.2 using JMS sensors" (useful even if you don't plan to use BPEL).
    Anyway, if you plan to use BPEL, forget JMS and use the BAM adapter (chapter 42), it's quicker & easier.
    Dominique

  • Create web service consumer client with Ant and wsdl

    How can I create a web service client with just Ant and WSDL?
    Thanks.

    Hi,
    Did you check this web log?
    /people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
    Eddy

  • Classpath for JMS standalone client

    Hi,
    I observed some problem, when I try to start my JMS client application. If in classpath is oc4j.jar it works, but when I replace oc4j.jar with oc4jclient.jar doesn't
    I notice the message:
    Exception in thread "main" java.lang.NoClassDefFoundError: com/evermind/server/jms/EvermindXAConnectionFactory
    at com.evermind.server.jms.ConnectInfo.getPass(ConnectInfo.java:98)
    at com.evermind.server.jms.EvermindTopicConnectionFactory.createTopicCon
    nection(EvermindTopicConnectionFactory.java:83)
    at sapconnector.MaterialMoverClient.main(MaterialMoverClient.java:52)
    the line no. 52 exactly means:
    TopicConnection connection = factory.createTopicConnection();
    What the OC4J client jar (oc4jclient.jar) is not enough for starting JMS standalone client?
    regards
    Krzysztof

    Hi, thanks for the reply.
    Well, I figured out that problem. It was my jar file. One of the jar file, which is imqjmsra.jar wasn't really the right one and that was giving me the problem. Well, at least that is working not, but I am having new problems.
    Right, I have been trying to make this work for about three days now. The truth is that my standalone JMS does work, when it is running on the same machine where the J2EE Server is located, but I am trying to make my JMS standalone client to connect to J2EE server from different location. Now I am getting connection refused error. Well, I guess I will be keep trying util I get this working.

  • How to create a custom function module with the records in SAP R/3?

    Hi All,
    How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
    Regards
    Sara

    Hi
    goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
    Look at the below SAP HELP links, These links will show you the way to create a Function Module
    http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

  • How to create Using Formatted Text Field with multiple Sliders?

    Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
    my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
    // constructor
    label1 = new JLabel( "Individuals" );
    scroller1 = new JSlider( SwingConstants.HORIZONTAL,     0, 100, 10 );
    scroller1.setMajorTickSpacing( 10 );
    scroller1.setMinorTickSpacing( 1 );
    scroller1.setPaintTicks( true );
    scroller1.setPaintLabels( true );
    scroller1.addChangeListener(this);
    java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
    NumberFormatter formatter = new NumberFormatter(numberFormat);
            formatter.setMinimum(new Integer(0));
            formatter.setMaximum(new Integer(100));
    textField1 = new JFormattedTextField(formatter);
    textField1.setValue(new Integer(10)); //FPS_INIT
    textField1.setColumns(1); //get some space
    textField1.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField1.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField1.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField1.selectAll();
                    } else try {                    //The text is valid,
                        textField1.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    label2 = new JLabel( "Precision" );
    scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
    scroller2.setMajorTickSpacing( 10 );
    scroller2.setMinorTickSpacing( 1 );
    scroller2.setPaintTicks( true );
    scroller2.setPaintLabels( true );
    scroller2.addChangeListener(this);
    textField2 = new JFormattedTextField(formatter);
    textField2.setValue(new Integer(10)); //FPS_INIT
    textField2.setColumns(1); //get some space
    textField2.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField2.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField2.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField2.selectAll();
                    } else try {                    //The text is valid,
                        textField2.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    // State Changed
         public void stateChanged(ChangeEvent e) {
             JSlider source = (JSlider)e.getSource();
             int fps = (int)source.getValue();
             if (!source.getValueIsAdjusting()) { //done adjusting
                  if(source==scroller1)   {
                       System.out.println("source ==scoller1\n");
                       textField1.setValue(new Integer(fps)); //update ftf value
                  else if(source==scroller2)     {
                       System.out.println("source ==scoller2\n");
                       textField2.setValue(new Integer(fps)); //update ftf value
             } else { //value is adjusting; just set the text
                 if(source==scroller1)     textField1.setText(String.valueOf(fps));
                 else if(source==scroller2)     textField2.setText(String.valueOf(fps));
    // Property Change
        public void propertyChange(PropertyChangeEvent e) {
            if ("value".equals(e.getPropertyName())) {
                Number value = (Number)e.getNewValue();
                if (scroller1 != null && value != null) {
                    scroller1.setValue(value.intValue());
                 else if (scroller2 != null && value != null) {
                    scroller2.setValue(value.intValue());
        // ACTION PERFORMED
        public void actionPerformed(ActionEvent event) {
        if (!textField1.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField1.selectAll();
        } else try {                    //The text is valid,
            textField1.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
             if (!textField2.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField2.selectAll();
        } else try {                    //The text is valid,
            textField2.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
    ...

    if :p3_note_id is null
    then
    insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
    Another option is that you have a trigger on table NOTES that generates a new note_id even for an update.

  • How to Create an Input Schedule Comparison with Data Using EVDRE

    Hello,
    I try implement the scenario described in "How to Create an Input Schedule Comparison with Data Using EVDRE".
    Once I am using the "Insert Function" from the panel and selecting the EVTIM function Excel crashes (see page 8 How to paper).
    Systems:
    BPC 7.0 NW SP02
    Office 2007
    BPCADminClient and BPCOfficeClient up to date
    Have anyone a solution?
    Thanks
    Oktay

    Hi Oktay -
    This function works in my BPC70NW SP02 system. Your issue might be that you are trying to access a TIME member that does not exist. Please make sure the offset value is a valid dimension member.
    I can confirm that EVTIM does allow the offset for base members (such as 2009.MAY) as well as parent nodes (such as 2009.Q1 or 2008.TOTAL)... BUT...the offset result of the EVTIM function needs to be a valid dimension member!
    Regards,
    Sheldon

  • How to create user editable Crystal Report with dynamic dataset

    What I would like to achieve:
    A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
    What I do:
    CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    CrReport.Load(TemplateFilename)
    Dim Results As DataTable
    DataTable is filled from a database
    CrReport.SetDataSource(mResults)
    CrReport.SaveAs(NewReportPath, True)
    The NewReportPath is opened in the default program.
    What are the problems
    The report is open in preview mode (not in design).
    When the field is added to the report the designer asks for XML datasource on preview.

    The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

  • How to creat the Varient for 1099MISC With Holding Tax

    How to create the Variant for 1099MISC With Holding Tax ?

    HI,
    please follow the below steps to create variant at report.
    tcode se38
    report RFIDYYWT
    pass all the parameters
    press save icon
    give variant name
    retrive the variant in report
    tcode se38
    report name RFIDYYWT
    press : shift + F5
    or get varinat icon.
    I hope above will resolve your issue.
    Regards
    Madhu M

  • How to create new view without interlinking with gantt chart or resource views

    ok clear
    one another question
       In msp how to create new view without interlinking with gantt chart or resource views

    Hi Shiv PMC--
    I splitted your question above in another thread in order not to have  a huge thread with many topics in it.
    That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
    table) or a table with a timephased grid (resource and task usage).
    Please give us more information, maybe with a concrete example so we can help you.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • How to create labeled table of Content with expand and collapse

    Hi All,
    Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
    User1
    Template1
    Template2
    User2
    +
    User3
    Template1
    Template2
    Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
    Thanks
    Bhupendra

    Hi,
    Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
    Expand/Collapse are part of HGRID.
    I think we can develop this functionality with little manipulation.
    Regards,
    Reetesh Sharma
    Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM

  • How to create tcode for modulepool program with selection screen?

    hi,
       How to create tcode for modulepool program with selection screen?
    thanks,
    sagar

    Hi,
    We need to goto SE80.
    In our program we right click on object name and goto create
    -> transaction. Enter the module pool program and screen number and save and activate.
    Or by SE93 also we can create a transaction code for our program.
    Hope ths helps.
    plz reward if useful.
    thanks,
    dhanashri..
    Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

  • How to create document/literal web services with WLS7

    How do you create document/literal web services with WLS7 ( not workshop)
    - Is it possible with servicegen and stateless EJBs as the backend component?
    The default is RPC/Soap-encoded is there anyway to craft the web-services.xml
    to make it document/literal
    - Is it possible with the JMS-implemented web services - have not tried this yet
    - Is there another mechanism?

    That would be the <web-service> element in the web-services.xml file, of course.
    "Michael Wooten" <[email protected]> wrote:
    >
    Hi Rich,
    Try adding a style="document" attribute to the starting <web-service>
    element.
    The might be a way to get <servicegen> to do this for you, but I haven't
    found
    it yet :-)
    Regards,
    Mike Wooten
    "Rich Muth" <[email protected]> wrote:
    How do you create document/literal web services with WLS7 ( not workshop)
    - Is it possible with servicegen and stateless EJBs as the backend component?
    The default is RPC/Soap-encoded is there anyway to craft the web-services.xml
    to make it document/literal
    - Is it possible with the JMS-implemented web services - have not tried
    this yet
    - Is there another mechanism?

Maybe you are looking for