How to create a job for proces chain

Hi All,
I have a process chain that gets a trigger (.txt Trigger file) in AL11 inbound foulder.....
we will check for the same trigger in AL11...if it is available..we will trigger the chain using sm64 ...
now, i want to create a job for the same and schedule it automatically everyday.....
Any help will be appreciated....

Dear Sam2027,
you can set a "recurrence" within the schedule options where you can decide not only the day but also the time.
The recurrence can also be use in conjunction with your trigger .txt (which I believe it's a file event): in this case both of them need to be satisfied in order for your schedule to run.
I hope this will help.
Regards,
Samanta

Similar Messages

How to create info area for process chains?

How to create info area for process chains?

Hi,
If I understand your question clearly, you want to assign display componets.
once you have created you chain you assign the components by clicking CTRL+F11
Regards,
Namrata

How to create Background job for Dialog program

Hi Experts,
I have copied Standard tcode to Z-tcode (CS12 tcode).
Now my requirement is to create background job for this program (but program is not a 'E' type its 'I').
How we can schedule Dialog program to Background.
Pls suggest me.
Regards
SK

Hi do as below :
Reefer below :
Bakcground Job Creation
You will have to submit your report using Submit statement ,
then inside the submitted report write open_job.
Regards,
Uma

How to find triggering job for Process chain

Hi,
I have a process chain and its triggering by some other system using an event.
I want to know how to find which ystem is triggering this job means process chain and on what basis it is starting?
I have an event for this process chain and also FM : BP_EVENT_RAISE. So how to find the with those details?
Thanks,
Phani

HI,
some other system means either dev, qas, prd?
for every process in a process chain there is a chain id which is same as the name of your chain,
for every chain id there exist some log ids , this both information you can find from the standard table RSPCLOGCHAIN
From this log id you can find the status of the process from table RSPCPROCESSLOG.
here u will find the status of your process whether is has been completed successfully or ended with errors.
Thanks,
Phani.

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

Creating a job for a procedure with an input parameter

Hi,
I want to create a job for a procedure ( sp_proc ) with a input parameter.
The input parameter is a date value.
As per the syntax for dbms_job.submit procedure;
dbms_job.submit (
job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2 DEFAULT 'NULL',
no_parse IN BOOLEAN DEFAULT FALSE);
How should the procedure be declared in the 'what' parameter of the dbms_job.submit procedure ?
Please guide.
Thanks.

Hi,
You are wright, I have found this thread [DBMS_JOB -- how to pass parameters to the job|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:351033761220].
Regards,

How to create a object for IPageItemControlData?

how to create a object for IPageItemControlData?

From the header comment you'll see that IPageItemControlData is an Interface of PageItemWidget. That must've been an InDesign 1.0 or 1.5 feature predating kPageItemBoss, because except for the same comment even in InDesign 2.0 SDK the only further reference is a copy in the comment of its sibbling IFrameControlData which was removed with InDesign CS.
The IID and kPageItemControlDataImpl are probably only around because deep under the hood there must be some kind of conversion provider waiting to do its job on a very old document.
I guess the closest in today's functionality will be IHierarchy.
Dirk

How to create batch job via a program

hi
i need to know how to create batch job via a program please suggest
arora

Wow!
> Total Questions: 234 (138 unresolved)
...and now you ask this?
Please accept our apologies for not pointing out to you way-back-when already that there is a search functionality here at SDN and that the correct forum should be used to post questions to.
Please read "the rules" at the top of the forum page, and search first => ask questions later.
I take the liberty of closing your question for you.
Kind regards,
Julius

How to create batch job based on sales organization?

I am Sending data using RFC function module, within a report program.
Now according to functional requirement I have to create two batch job scheduling scenarios:
1. Provide a batch job to be run towards month end (2X, 1X) to sent a delta record message using Report. This is scheduled on demand or requested on demand. Recommend 1 message per sales org.
Q: What does it mean by scheduled on demand or requested on demand?? Second thing is that like we have 10 sales org. and in variants for job scheduling we can assign only 1 at a time......how can i schedule per sales organization? do i need to create different job for each sales organization??
(2X, 1X) what is the meaning of this notation??
2. Create a new nightly batch job, run after daily billing batch, to send a delta records message of Report. Recommend 1 message per sales org.
Anyone please provide me some details on this issue.......
Regards
Anshul

I am Sending data using RFC function module, within a report program.
Now according to functional requirement I have to create two batch job scheduling scenarios:
1. Provide a batch job to be run towards month end (2X, 1X) to sent a delta record message using Report. This is scheduled on demand or requested on demand. Recommend 1 message per sales org.
Q: What does it mean by scheduled on demand or requested on demand?? Second thing is that like we have 10 sales org. and in variants for job scheduling we can assign only 1 at a time......how can i schedule per sales organization? do i need to create different job for each sales organization??
(2X, 1X) what is the meaning of this notation??
2. Create a new nightly batch job, run after daily billing batch, to send a delta records message of Report. Recommend 1 message per sales org.
Anyone please provide me some details on this issue.......
Regards
Anshul

How i create a job to clear a rubbish idocs

Hi friends,
How i create a job to clear a rubbisch idocs, for 2 weeks ago or more?

I guess from sm36...
Thanks,

Cancel the scheduled jobs for process chains - urgent

Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
Radha

Hello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Creating a Job for publication in Sql Server with select statement for passing a parameter

I am creating a job for adding article to a publication. the second step (e.g. for adding article) gives me error. I pass the name of the table as follow:
     EXEC sp_addarticle
           @publication = 'TTB', --THE NAME OF MY PUBLICATION
           'select top (1)' @article = 'Name from TableAdded Order by create_date Desc',
           'select top (1)' @source_object = 'Name from TableAdded Order by create_date Desc',
            @force_invalidate_snapshot = 1;
TableAdded is a table I have in my publisher which contains the name of the newly added table.
I believe it fails because the way I pass the name of the article to the store procedure is not correct. Can anyone please help me on that?
Kind regards
Amin

Yes, the way you add article is wrong.
you may try the below and let us know if you have any issues:
while loop begin (Get the values from TableAdded with status IsAdded=0)
Assign the values to variables like @article = Select top 1 Name from TableAdded where IsAdded=0
Call the sp_addarticle assigning the variable
update the Isadded flag in tableAdded for the name to 1
end while
BTB, Article configuration is supposed to be a one time configuration. Having said, you can easily configure through API. Caution, not sure what are you trying here, for adding new article, you may need to synch the data first in the above approach and should
carried out in the downtime.

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How to create a job for proces chain

Similar Messages

Maybe you are looking for