How to create a Lab channels substitute in FW CS4 or PSE 7

I'd like create Lab channels substitute or something similar in Fireworks or PSE for more accurate photo retouching.
I mean noise reduction, sharpening and special cases of isolation. All images will be intended for web publications.
If possible I don't want to buy PS since I have acccess to FW and PSE.

This has nothing to do with color management, you'd be better off posting in the Fireworks forum.

Similar Messages

  • How to create multiple physical channels using DAQmx?

    Hi, I am new to Labview.
    Can anyone please help me on how to create multiple physical channels? I am following the LabVIEW examples in the NI example finder but they are only for acquiring signals from one channel.
    Actually, I am using the channels of an SCXI 1520 to measure voltage signals. And one more thing, in the NI Example Finder, they are sample codes there for setting the filter in SCXI 114x.
    Will this example work with an SCXI 1520, too?
    Thanks!

    There are many ways to read multiple channels in LabVIEW. First, if you look at that example that lets you set the filter setting on the 114x and you click on the 'Physical Channel Listbox' then click 'Browse' you can see that you can select multiple channels. After you select the channels and hit 'Ok' it will build a multiple channel string. This is one way to read multiple channels.
    Next, you can create a 'Task' in Measurement and Automation Explorer(MAX). When you create this task select all the channels that you need to read then back in LabVIEW simply select a 'DAQmx Task Name Constant' Select the task you just created and wire that to an Input of your first DAQ VI. If you do this you do not need to have a 'DAQmx Create Physical Channel' VI or create
    Task because it is already created in MAX.
    When looking at example VIs you can tell if a multi-channel read is acceptable by looking at the 'DAQmx Read' and if it says NChan that means it will do a multichannel read. There are tons of example programs that will display the multichannel read capabilities.
    This example may not work for the 1520 because the properties that are set could possibly be specific to the 142x. When using the 1520 though it is very likely that the properties will be very similar if not exact. You will simply put a DAQmx Channel property node on your block diagram and then look for the Lowpass filter settings properties that will most likely be in the same location. Now another way todo this without using a property node would be in MAX when you create a task set the filter settings from the Device tab in the task configure window.
    Let me know if you need anymore help with reguards to this issue! Have a great day!
    Allan S.
    National Instrument
    s
    Applications Engineering

  • How to create a new channel for a role or an organization using API

    Hi all,
    I tryed to create a new channel using the method createChannel(...)+ in the class ContainerProviderContext+ of the package com.sun.portal.providers.context+ and everything is fine. The channel is created under the display profile of the authenticated user who asked for the new channel.
    But I'd like to create new channels for other users/roles/organizations. Does anybody know how to do that???
    Thanks in advance.

    Hi Juan,
    Yes you can use JDBC adapter to integrate with DB2 but you need to deploy the DB2 drivers.
    Possible options to integrate with DB2 are :
    We can integrate DB2 system with XI using different methods :
    a)For batch mode we can work with standard file adapter of XI
    b)Install MQ Series and use JMS Adaptersto send and receive messages with DB2
    c)Use the JDBC Adapters to directly write to the DB2 Database.These is for
      incoming interfaces
    d) Third Party Adapters provided by iway can also be utilized ,but it requires a separate license
    regards
    Gangaprasad

  • How to create a RMAN channel (remote host)

    Hi Folks
    I am trying to duplicate a DB with RMAN, but when I run in the box2(aux)
    $ rman target sys/oracle@stdp auxiliary /
    (stdp is my target)
    RMAN>duplicate target database to basedos;
    (basedos is my aux)
    the follow error message is displayed:
    channel ORA_AUX_DISK_1: reading from backup piece +GRUPO01/stdp/backupset/2006_04_23/nnndf0_tag20060423t130319_0.268.588517401
    ORA-19870: error reading backup piece +GRUPO01/stdp/backupset/2006_04_23/nnndf0_tag20060423t130319_0.268.588517401
    ORA-19505: failed to identify file "+GRUPO01/stdp/backupset/2006_04_23/nnndf0_tag20060423t130319_0.268.588517401"
    ORA-17503: ksfdopn:2 Failed to open file +GRUPO01/stdp/backupset/2006_04_23/nnndf0_tag20060423t130319_0.268.588517401
    The +GRUPO01/stdp/backupset/2006_04_23/nnndf0_tag20060423t130319_0.268.588517401 is in box1(target), how to create a channel in the box2 that reference this backup piece or need aditional permissions or grants?
    Thanks for your responses?

    RMAN needs access to the backup sets. You can try:
    - running RMAN on the target machine whilst still duplicating to the auxilliary box;
    - copying/mounting your backup sets to the same path on the auxilliary box;
    - copying/mounting your backup sets to a different path on the auxilliary box and registering in RMAN;
    Details on versions, O/S, backup locations, channel specs would help.

  • How to "Create New RSS Channel" in GroupSpace.

    I try to create new rss channel following groupspace document( http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/groupspace/index.html ).
    but it have some error "Failed to add RSS channel. Be sure this URL returns valid RSS output.".
    I put "http://rss.news.yahoo.com/rss/oddlyenough" in input box follow the document.
    I missing some information except the document?
    Thank you .
    Ron.

    use the standard java system properties (either through command line or code)
    http.proxyHost,http.proxyPort,
    http.proxyUser,http.proxyPassword - If your proxy needs authentications
    regards
    deepak

  • How to create new MTA channels for redirecting mail.

    I have to forward a mail to faxserver.Faxserver has its own mail id on messaging server.When I send a mail to a user on my messaging server it should automatically be forwarded to faxserver user account.For that I need to make a new rule and channel.Please suggest me the way of writing rule/channel with an example.

    "Faxserver has its own mail id on messaging server" What messaging server? The iMS machine, right? In which case then no you do not need a new channel.
    The mail will be accepted, and once the final address is determined then the final domain and the rewrite rules will determine just what channel this message will leave via. It'll be either tcp_intranet or tcp_local is my guess.
    As for creating a new channel. The manuals should have some examples of that. You could always use an existing one as an example. If you search through things that I've said on this site you'll find examples.

  • How to create a PDF with substituted key-value and table-values using a template language

    I have about 50 key-values and 10 table-values that I want to substitute into a formatted report template (language can be anything standard, would create a small number of these templates) and then use an Adobe tool to substitute the values into the template and produce a PDF. Preferably the template language would permit some basic conditional logic (if <key #> has value <value> then <show key label here> and <key value here> in close spatial proximity on the form) and permit embedding of a static graphic logo, text with fonts/styles, etc. to produce a polished report but also handle pagination (e.g. enable page breaks or numbering) to be handled automatically.
    What is a recommended template language and product to accomplish this?

    Are you thinking of something like a blank form that you can enter information into, save, and send to another user? If so, what you want is possible. If you want more information, post again and include more details about how you want to use it and how the recipient will use it.

  • How to create seperate color channel for print of illustrator document

    Hi,
    I need to print a document with partial UV-spots, and cannot figure out how to make my Illustrator document ready for print!
    The online print center guides me to:
    create a 'seperate print channel' for the specific elements in my document i want covered, with either a '5th color or a special color' set for 'over-print and 100% color'.
    Can anyone help?
    Thank you!

    Draw the spots you want to use and fill them with a spot color.

  • MAX: how to create a Calculated Channel based on two physical channels?

    Good morning,
    I need to configure some tasks in MAX with Virtual Channels that are calculations based on physical channels. I saw this article : http://digital.ni.com/public.nsf/allkb/1BFCE6FAD5B3944986256D67006DF7EC but cannot see the equivalent in the newest versions of MAX (V5.1).
    As an example I am already acquiring the physical channels Ch1 and Ch2 and I want to build a virtual channel Ch3=E+(A.Ch1+B)/(C.Ch2+D). A,B,C,D,E are constant values. I would then like to integrate Ch3 in a task together with other physical channels that I am acquiring.
    Could you direct me to this function?
    Thanks for your answer.
    Christophe

    Hello Christophe,
    With the newer versions of NI DAQmx and NI MAX there was a choice made to go from the relatively limited VI Logger options to a more extensive form of configurable applications.
    For this purpose (and others) NI Signal Express was created, which allows you to configure applications with a limited amount of programming.
    To do similar (and more things) then you were used to do with VI Logger you can use NI SignalExpress
    http://www.ni.com/white-paper/5825/en/
    http://www.ni.com/white-paper/5827/en/
    This specific VI logger functionality for the creation of ""virtual channels" (step 5 to 10) through VI Logger Tasks (directly from inside NI MAX) however does no longer exist.
    This also more clearly seperates your Configuration Tools (like NI MAX) from your actual applications made with LabVIEW or SignalExpress.
    Would using NI SignalExpress be an option for you?
    Kind Regards,
    Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
    CLD, CTA
    If someone helped you, let them know. Mark as solved and/or give a kudo.

  • How to create a ripple 3d effect using photoshop cs4

    Hi,
    Can any one help us or guide us to create 3d ripple design [link removed by host] for homepage.?
    Thanks in advance
    Cinas

    Cinas,
    Must it be in Photoshop? It might also be in Illustrator, to mention an obvious alternative.
    An image hinting at what you want would help the helpers.

  • How to building a multi-channels analog output task in visual c++ 6.0 (without Measurement Studio)?

    Hello!
     I have a PCI 6251 card, and using DAQmx C function to generate a wavwform. (single channel ).
    But, how to creating a multi-channels analog output task, and had a different frequence in each channels?
    Thanks.

    This is getting to be a common question!
    The answer is, you can't.
    If the rates have common factors, you can use a higher overall rate. The slower waveform will simply have extra points in it to make up for the higher update rate.
    John Weeks
    WaveMetrics, Inc.
    Phone (503) 620-3001
    Fax (503) 620-6754
    www.wavemetrics.com

  • How to create an index file?

    What steps are involved in creating an index file from my data? This would be "x-axis" in the form of time.
    thanks

    Hi Zilla
    Are you looking for information on how to create an index channel to plot an array of Y values against?
    If so, go to DIAdem ANALYSIS, and from the first module, select the function called �Generate Data�, (second from the end).
    Fill out the values accordingly and when you press execute a new channel is created that you can use to plot your Y array of data against.
    Let me know if this is not what you were looking for
    Thanks
    Tom
    DIAdem Product Manager
    512-683-6841

  • Create new portlet channels dynamiclly

    I'm looking into how to create new portlet channels when a new tab is created so that the portlets can be customized on each tab. Currently when a portlet is modified from one tab the portlet gets modified on all tabs. Can somebody point me to an example on how
    this might be accomplished?

    I'm looking into how to create new portlet channels when a new tab is created so that the portlets can be customized on each tab. Currently when a portlet is modified from one tab the portlet gets modified on all tabs. Can somebody point me to an example on how
    this might be accomplished?

  • How to creat a transparent psf in photoshop cs4

    Creating a file which Background contents is transparent in Photoshop CS4,and save as this file in PDF or print this file in PDF,but i found the pdf file is un-transparent when opened in Acrobat, why ?
    and how to create a transparent pdf file in Photoshop CS4?
    and a transparent pdf file can be created easily in an early version Photoshop

    The transparent pdf file created by Photoshop CS4 will be use to print over an underlying background image,nor for a web site,and can not be placed into a Indesign file
    if Show transparency grid (Acrobat>preferences>page display>show transparency grid)is checked,the transparent background will be show

  • How to create a substitute for requester in SRM 7.0

    Hi,
    do you know how to create a substitute for requester?
    we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
    Thanks.
    Regards,
    Nelson

    You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
    Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
    Edited by: Jay Yang on Mar 31, 2011 10:47 AM

Maybe you are looking for