How to create a lccs account in developer portal

afcs.acrobat.com not working any replacements suggest me

In Portal User Menu is displayed based on the roles assigned to a user.
In a nutsheel if you want a user to see some menu in portal. The following needs to be done.
1. Create iViews/Pages/Worksets as required
2. Create Role and set entry point to true (There are other ways which you will learn later). Create as many roles as you want.
3. Assign the iViews/Pages/Worksets to the roles as needed.
4. Assign the roles to users or user groups
Steps 1,2,3 will be performed using content adminstration tab.
Step 4 will be perfomed using Super administration tab.
Now when users login to portal the menu will be based on roles (first level tab will be role names). Second and third level menus depend on the iView/pages/worksets assigned to the roles.
Hope this solves your problem.
Thanks and Regards,
Prasanna Krishnamurthy

Similar Messages

How to create a new account for Portal

Hi,
I just installed portal in my windows xp pc. Currently, I can log into the portal home page as a single sign-on user. (super user). I'm wondering how to create a new account for a portal user so that I don't have to sign on as an admin.
Thank you so much for your reply,
Emily

login into SSO and create an User
1. Login into Portal -> Builder ->Administer click on User Management which takes you to oiddas were you can create the user
or login into sso directly
http://<host>:<port>/pls/orasso
http://<host>:<port>/oiddas
Murali

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create 2 icloud accounts with one apple id

I would like to find out how to create 2 iCloud accounts using the same apple id. Currently, my husband's iphone4S and my iPhone 4 have merged contacts which we don't want, and when he texts it shows that it is from me.

You can't do that. One of you will have to create a new icloud account with a new ID and connect the device to it.
TO GET DATA FROM ONE ACCOUNT TO A NEW ACCOUNT:
When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.
When prompted choose to keep the data on the iPhone.
After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account.
Note that this only affects the "Apple data" like contacts, calendars, reminders, etc. Many third party apps also use iCloud to store data files there. These files may be lost in the process, unless the apps also keep the data locally on the device.
NOTE: Photos in the photo stream (if you use it) will not transfer to the new account. It is advised that you save the photos to a computer before performing the account switch.
CREATING A NEW ID:
Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

How to create a new account and copy all settings?

I think my main user account is corrupted. So I want to create a new account and copy all of my settings, files etc..and more than likely piecemeal just incase my settings are what is corrupted. That way I can isolate the problem.
I don't plan to delete the main account until satisfied and I also have my Time Machine backup plus my SuperDuper backup.
I can/should be able to figure out how to create the new account, but I am very unclear on the best/easiest approach to copy in my iTunes files and settings, applications(is this even an issue), address book, email, etc? I should be able to find most everything underneath my home account folders but what else am I missing here? I don't want to find out the hard way.
Please share some advice or perhaps a link/FAQ on how to approach.
Thanks in advance.
--Mickey

use this [link|http://discussions.apple.com/message.jspa?messageID=6185507].

How to create new icloud account on my pc

How to create new icloud account on my pc and use icloud

ajaysaini0011,
Signing up for an iCloud account requires an iPhone, iPad, iPod touch, or a Mac.
You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later.
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/en-us/HT201309
Cheers,
Allen

How to create an External Alias for a Portal URL ?

Hi Gurus,
Can anybody tell me how to create an external alias for a portal link(URL). Actually, my problem is i want to send this Portal URL(link) thru' a SendMail step to the user so that when he clicks on it, it will take him to his UWL(Ofcourse after signing-in). As this URL length is > 80 char(101 char), i am not getting the full lenght URL in my Outlook mail. THough we are on ECC 6.0,Basis Rel 7.0, as per the OSS note 559234, we should have this length extended to 132 bytes. But, for some reason, its not happening. And,in the same OSS note, it was mentioned that we can use external aliases to achieve this(shortening the URL length).
Can anybody tell me how to achieve this, either thru' increasing the URL length or thru' ext. aliases.
Please reply asap.
Thanks in advance
venu

Not an issue as of now. I'll open up again if needed

How to create an database account authentication scheme in apex

Dear
I have an apex installation (embeded) on oracle 11g.
I want to create a database account authentication scheme in apex. I have seen the page with different tab like name,subsription,source,session not valid, login processing, logout URL,session cookie attributes and comments.
I want to know what are the things to be specifed on these tabs and the effects. I have gone thru the documentation 'Application Builder User’s Guide Release 4.1' , but the functionalities of these tabs are not mentioned.
Please help.
Dennis
Edited by: Dennis John on Feb 28, 2012 10:57 PM

Thanks to dear Jit
I am new to apex.
I have gone thru that documents but I couldn't find any detailed documentation about the database account authentication scheme configuration
The database account authentication scheme creation interface will show tabs like name,subsription,source,session not valid, login processing, logout URL,session cookie attributes and comments.
I want to know what are the things to be specifed on these tabs and how it will reflect in the login. The specified documentation is not giving any detail about the above mentioned tabs of authentication scheme creation iwizard.
And also I want to know how the applciation user will be mapped to the database account?
As per my understanding a database user (for each run time user) is required for to authenticate the apex run time login other than the applciation schema user (holds the objects of applicaiton)
run time user means - end user who uses the applcaition, not the developer.
Please help.
Dennis

How to create Mobile User Account

Hi all,
I have a dumb question but it makes me crazy !!!
I'm new in CRM 5.2 and in mobile as weel.
My question is : How to create a user acount into my mobile infrastructure ?
I've followed the following explanation but I don't find the solution :
[help|http://help.sap.com/saphelp_crm60/helpdata/de/c8/2ae1a3c73245c8aef8c4b69c2ff072/content.htm]
In there, it tells me to go thought User Management tool of Mobile Application Studio ( is it Microsoft Visual Studio ?) but in there i do not find any tools.
Thanks for your future help
Regards

hi,
Creation of User Accounts
Purpose
This process describes the steps required to create user accounts for secured and controlled access to the Mobile Application Repository (MAR). User accounts are created for consultants, who intend to customize mobile client applications using Mobile Application Studio (MAS). User account allows a consultant to log on to MAS.
Process Flow
       1.      During the installation of MAR, the system enables the User Management feature.
If MAR is upgraded from a release prior to 3.0 to the current release, the User Management feature must be enabled manually by system administrator. This is done by changing the umfrc parameter value to YES in the ARS_SYSTABLE.
       2.      The CRM technical administrator creates a DSN to access MAR by using the default internal login arsdb with password arsdb.
       3.      The CRM technical administrator carries out the following tasks using the User Manager tool of MAS:
                            a.      Creates user accounts.
                            b.      Associates each user account with a standard MAR profile. For more information, see Profiles of the Mobile Application Repository.
                            c.      Specifies a password for each user account.
Login IDs of the Mobile Application Repository
Definition
A login ID is a source through which users log on to Mobile Application Studio, and connect to the Mobile Application Repository (MAR). When MAR is installed, standard login IDs are available by default. While creating user accounts, the system administrator associates a standard login ID with the profile of each user account.
Structure
Login ID
Allows you to:
ARSAdmin
·        Perform administrative activities in MAR.
·        Create and modify development objects in MAR.
·        Modify the password of a user account.
ARSDeveloper
·        Create and modify development objects in MAR.
·        Modify your own password.
ARSUser
·        View development objects in MAR.
·        Modify your own password.
ARSSys
·        Get information about the MAR.
·        Validate MAR users.
ARSdb
Create a DSN for MAR. The default password for this login is arsdb.
Profiles of the Mobile Application Repository
Definition
A profile of the Mobile Application Repository (MAR) is a collection of access rights defined for:
·        Development objects, like tiles, tile sets and business objects of mobile client applications
·        Services of MAR like change lists and namespaces
Structure
The standard profiles that are available are listed below.
Profile name
Associated login ID
Allows you to:
Administrator
ARSAdmin
·        Perform administrative activities like creating and maintaining users.
·        Read and write repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert a change list.
·        Transfer the ownership of objects to another MAR.
·        Create link objects to integrate tile set help.
·        Create and modify framework objects in MAR.
ROGuest
ARSUser
·        View development objects in MAR.
·        Modify your own password.
Developer
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release change lists that have been created only by you.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
SPDeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Modify your own password.
·        Create and modify development objects in MAR.
This profile does not allow you to release change lists.
QMResponsible
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
·        Release and revert change lists.
This profile does not allow you to create a change list.
Coordinator
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert change lists.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
Frwkuser
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Transfer the ownership of objects to another MAR.
·        Create and modify framework objects in MAR.
Infodeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Create link objects to integrate tile set help.
thanks
karthik
ifhelpfull reward me some points

How to create a separate account on iTunes for my iPhone and iPad

I have an 8 GB capacity iPhone which I use to connect to iTune for music, video, app synch purpose. Recently I purchase iPad3 capacity 32 GB. When I connect pad to iTune first time, pop message says that do u want to create a separate account or restore iPhone backup? That time I had chosen restore.
Now problem which I am facing is:
1. Say for example I downloaded 3 HD Gages for iPad then I synced with iTune. Next when I am connecting iPhone these 3 HD games are getting installed on the phone, which I don't want.
2. Say I have selected almost 20 GB audio and video for my iPad which are there in the iTune, when I am connecting iPhone all these audio and video are started copying to the iPhone.
How to overcome from this issue. How to create separate account for my iPhone and iPad on iTune? So that same Apps, Music, Video etc. will not installed or copied to both the device when connected to iTunes.
Help....
Thanks.

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

I can't get icloud to work on my computer not sure how to create an icloud account

Hi there, can anyone help me with this? I have been trying all day to get icloud to work on my computer. I have successfully downloaded it on to my laptop. I am having trouble creating an iCloud ACCOUNT as it won't let me sign in with my Apple ID until I have created an iCloud account and there are no instructions on HOW this is done, unless I am overlooking something. I have a 3rd Generation iPod Touch 16GB, which should be able to link up with icloud, but I am getting nowhere fast and getting frustrated with all the stonewalling. PLEASE HELP ME.

Apple IDs and iCloud
For the iPod you need to update iTunes to 10.5. Read here > Learn how to set up iCloud on all your devices

How to create a group account in SDN

Hello Everybody
How do i create a company account in SDN and have my Functional Consultants and Developers all registered under that account. Ex: I have company XYZ and want to add all my ABAP and Functional Consultants under that account?

Close this thread here and open a new thread under Coffee corner, There someone from SDN will be able to help/guide you
Regards,
Nick Loy

How to create new user account and delete old one?

Greetings,
we have wanted to change our alias on the discussions group but understand from the frequently asked questions section that,
"Once you create an alias, you cannot make changes to it. If you want to change your alias, you will need to create a new User Account".
However it does not go on to tell us specifically how to now set up a "new User Account". Could someone specify how to do this? And if we do this, how would we then delete the current User Account? Thank you.
Chris

Colleen Von Eckartsberg wrote:
Thanks for the reply.
However I am still confused. I originally thought the "user account" referred to an account specific to the Discussions Forums, not the general "Apple ID" however your email seems to suggest they are one and the same....Please clarify.
If so, however I do not think I am able to change my Apple ID. As I am a mobile me user I am required to us my mobile me address for my apple ID.....and do not think I can have two ID's with the same mobile me address.....
Any additional thoughts are appreciated. Thanks.
Chris
Not with the same Primary address, but you can use your MM address as a secondary one. That is how I have my 2 Apple IDs setup. 1 uses my Dot Mac address and the other uses an ISP address as the Primary with the latter having my Dot Mac address as an alternate address.
Warning, even if you create a new account, you won't be able to use your current ALIAS with the new account.

How to create an email account??

Hi,
How to create a new email account by using Java program.
I'm able to send and receive the mails to and from an
existing account by using JavaMail.
But I dont know how to create an account.
Please help me...
thanks in advance

hi,
I also have the same problem.
I m very confused about how to create mail accounts.
My mail server is using linux.
Can u plz help/guide/suggest me on "how can i add facility of new mail account creation like yahoo mail / hotmail....??? "
-- what programming language/scripting language i should use which is secure also.
Plz help me.
Any type of help will be greatly useful to me.
Thnk u very much.

How to create own server account for servlet application

hi friends..
i have created a servlet page which recieve some data from a j2me program..
i am running this aplication on my pc using http://localhost:8080/mypage
now i want to deploy my j2me program on my mobile phone and need to get data in my servlet page
for this i need to create my own server account for apache but i dont know how to create my own sserver account
please help me out if anyone knows it how to do it...
thanx
kiran_arora

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

How to create a lccs account in developer portal

Similar Messages

Maybe you are looking for