How to create a login certificate for BI launchpad?

It is possible to create a security certificate (to store user name and password) and with it to be able to login to BI 4.1 launchpad without completing info at every session? just to confirm certificate (similar to SAP passport).
I need a solution to allow different rights for multiple users, not a general baypass of BI Launchpad logon.

you can configure SSO in you Env like:-
SAP note:-1631734- Configuring Active Directory Manual Authentication and SSO for BI4 
Also you can configure SSO though Siteminder.
SAP note:-1766239 - How to configure Siteminder SSO in 4.0

Similar Messages

  • How to create a login page for my client and a form so he can add/edit or delete information ?

    I have a real state client and one of the pages is to show all the houses he is selling with their information.
    And he wants to have a login page so that only him have permission to add, edit or delete a house from his web page.
    Also when adding a new house i want to have a form(kinda like craigslist, ebay,amazon) so he can chose type of house,price,adress,  floor, used , new, etc...?
    I hope i was specif enough.
    thanks

    If this was me, I would just create a log in page. Set the users default access level to 0 and then go into the database and set your's to 1. From there, I would have a page that only is accessable to people with a user access level > 0 .
    On this second page, make a table where you can insert picture(s) of the house, as well as information about the house. Have this page insert records into a database.
    Finally, you will have your house listing on a page that is a dynamic table, which populates itself from the database of housing pictures and information.
    It involves some database work, but with the built in functions of Dreamweaver, it is simple. I would suggest however, that you store links to the pictures in your database as opposed to storing the actual picture, but that's more up to you.
    By doing all this, you have made it so at any time, your admin, and only the admin, can log in, upload pictures and information about a listing, and have it go live to the site.

  • How to create a LOGIN Form & LOGIN ID & PASSWORD for END USERS

    hi,
    i have just created a Database and Forms & Reports using developer 6i.
    now i want to deleiver that Database to end users, but i dont know that how to create a LOGIN Form for the end users and also i want to assign each user a Login ID & Password.
    Plz help me to solve out this problem.

    1. Create the user accounts on the database CREATE USER ... IDENTIFIED BY...
    2. Grant CONNECT Role to the Users
    3. in the main form (the one which is being called initially at runtime) in the ON-LOGON-Trigger create a CALL_FORM() to the Login Form
    4. The Login Form will be called; build a Block with username, password and a Button
    5. In the Button call the LOGON Built-In
    6. Control will be passed to the initially called form again
    I also noticed a thread in here explaining this in more detail...
    Message was edited by:
    user434854

  • How to create a login interface in labview PDA module?

    How to create a login interface in labview PDA module? So that it checks with a list of usernames and passwords and allow to go to another VI?
    Anu

    Anu,
    I've attached a really short example that does something like what you're talking about.  It just compares the user's username and password a pre-determined username and password and then "logs the user in" based on that comparison.  Like Greycat said, you probably want to store this username and password info in some sort of file on the PDA that's in an encrypted format for both security and flexibility of your application.
    I hope this helps,
    Justin D.
    Applications Engineer
    National Instruments
    Attachments:
    LoginVI.vi ‏17 KB

  • How to create a password file for executing psadmin command to deploy portl

    how to create a password file for executing psadmin command to deploy portlet

    What you have done is perfectly right. The password file doesn't have anything else apart from the password
    for example in your case
    $echo password > /tmp/password.txt
    However I remember that in windows install, the Application server used to wait for a user's input when a deploy was to be done for the first time. So Can you read the Release notes or the Readme file which has come with windows.
    The solution was,
    manually use asadmin command of application server to deploy some war (any webapp will do), at this time, a question will be prompted to accept a certificate. once this is done, deploy portlet should work fine!!!
    HTH

  • Does anyone here knows how to create a login page thru JDBC?

    Anyone here knows how to create a login page which connect to database thru JDBC but not JDBC-ODBC bridge?

    Hi..pls you'll do people here a great good if you could explain yourself better..!
    Anyway if you are trying to connect to an Oracle Database you dont need the jdbc-odbc bridge as oracle provides a special driver for java applets/applications that is "the thin driver" and the "oci driver"..so if you are connecting to Oracle your connection will look like this:
    Class.forName("oracle.jdbc.driver.OracleDriver"); //not sun.jdbc.odbc.JdbcOdbcDriver
    Connection con = DriverManager.getConnection ("blah blah, blah");
    no need for the jdbc-odbc bridge.
    I hope i've answered your question.
    Thanks.

  • How to Create Roaming Profile(s) For Windows Workgroups

    This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
    Here are the steps in order to do this:
    On the host PC:
    1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
    2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
    3. Goto Properties>General, and tick 'File and Printer Sharing'.
    Click Apply + Ok.
    4. Goto Control Panel>User Accounts, add a new user.
    5. Logon to this user, and open the profile folder properties.
    5b. Share this folder.
    6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
    Click Apply + Ok.
    7. Click on 'Caching' and disable Caching for this Share.
    Click Ok.
    8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
    Click Apply + Ok.
    On the remote PC(s):
    1. Make the same User as on the Host.
    1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
    3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
    4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
    4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
    Click Apply + Ok
    *Note* Replace the \\path\ accordingly to what names are on your Host PC.
    5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
    on 'ProfileList'.
    Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
    6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
    *Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
    7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
    Enable these settings:
    'Do not check for user ownership of roaming profile folders'
    'Delete cached copies of roaming profiles'
    'Log users off when roaming profile fails'
    "Add the Administrators security group to roaming profiles'
    'Prevent roaming profile changes from propagating to the server'
    7b. Make 'Timeout for dialog boxes' '1' (seconds)
    8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
    Make 'Number of previous logons to cache (if server is unavailable) '0'
    Now you're ready to login to the Profile on the remote PC.
    *Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
    Thanks for reading.

    Hi,
    I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
    Re: target group creation
    Regards,
    Priyanka

  • How to create a login portlet?

    anyone can tell me how to create a login portlet?
    I'm created a JSR286 portlet use "weblogic.security.services.Authentication",that can login only in the portlet application.The portal can't Authentication.

    Hi.
    Portlets are consumed via WSRP 2.0 (Remotelly).
    I recommend you create an ADF Task Flow for your login process of your Portal instead of a Portlet.
    Regards.

  • How to create a login to users in PHP

    How to create a login for users to access their data,
    currently I can only see the first user everytime I login even with
    a different username. I know I need session stuff but don't know
    how to use, add or where to put them in.
    Thanks in advanced.

    I also am wrestling with the same problem. Session variables
    have not worked. I have determined that if the GET method is used,
    then the recordset of the users records are there. If the POST
    method is used, the recordset is blank. It appears to be something
    inherent in the Log In User behavior.
    I am trying to have a customer log in and then only see their
    particular inventory records. I do not want them be directed to a
    page with a listing of all the various customers and then select
    from that. Not suitable at all.
    If I find an answer, will let you know.
    Thanks and good luck,
    Dale :-)

  • How to create a new account for Portal

    Hi,
    I just installed portal in my windows xp pc. Currently, I can log into the portal home page as a single sign-on user. (super user). I'm wondering how to create a new account for a portal user so that I don't have to sign on as an admin.
    Thank you so much for your reply,
    Emily

    login into SSO and create an User
    1. Login into Portal -> Builder ->Administer click on User Management which takes you to oiddas were you can create the user
    or login into sso directly
    http://<host>:<port>/pls/orasso
    http://<host>:<port>/oiddas
    Murali

  • How to replace self-signed certificate for enterprise manager console

    Does anyone know how to change self-signed certificate for https access to Enterprise Manager console, which is issued during installation of Oracle 11g?

    Well, this might not be much help, but for 10g, on AIX, docID 1171558.1 describes how to create a new certificate.
    Not sure how relevant it will be for 11g, sorry :(

  • How to create a RFC destination for extracting data to HANA

    Hello All,
    Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
    I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

    Hi Venkatesh,
    In SM59 t.code we create RFC destinations.
    Go thru the video link for creating RFC destinations step by step
    How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

  • How to create a daily report for sales order

    hi
    how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

    Hi
    You have to use the sales order tables VBAK,VBAP and VBEP
    So keep date field on selection screen
    and treat this date as Order creation data audat field in VBAK.
    based on this fetch the data from VBAK and VBAP  with the following fields like
    VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS  etc and display in the report
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to create an address code for PO delivery address?

    Hi Guys,
    How to create an address code for the delivery address in the purchase order? Please explain me with details.....
    Thanks
    Raja

    delivery adress records can be created with transaction MEAN.
    the number is purely internal.
    In ME21N you can then search by name (you will certainly not know the number)

  • How to create different log files for each of web applications deployed in OC4J

    Hi All,
    I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
    1. how to create different log files for each of my deployed web applications ?
    2. what are the advantages in running multiple instances of oc4j and in what case we should run
    multiple instances of OC4J ?
    3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
    Thanks and Regards,
    Kumar.

    Hi Avi,
    First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
    I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
    I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
    Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
    Thanks and Regards,
    Ravi.

Maybe you are looking for