How to create a magnifying glass for image details

hello,
i am displaying an image with high resolution,so that the image on the screen has not the real resolution.
to look at details i want to move the mousepointer over the image and in an area under the mousepointer there should
appear the related part of the image with original high resolution,like a magnifying glass.
so what can be a solution for this?
thanks axel

Hi
I have created a sample here with Flex for
magnifying glass in flex:
http://devsachinonflex.blogspot.com/2010/04/magnifying-glass-in-flex.html Sachin dev tripathi
Flex Developer

Similar Messages

How to create a database table for educational details

how to create table for this image. i have to develop a job portal website. i created all the tables that required. but i dont know how to store these fields in table. any one help me plz

It would need following tables
1. Employee table where EMpNo field would be included as an attribute. Other fields would be EmployeeName,Designation, ...
It will have Primary Key as EmpID
2. QualificationType table with QualificationCategoryID and QualificationCategory with values Highest Qualification Post Graduate etc
QualificationCategoryID is the primary key
3. QUalificationTypeAttributes tables with fields as QUalificationTypeAttributeID,QUalificationTypeAttributeName
QUalificationTypeAttributeID is primary key
and QUalificationTypeAttributeName will have values Institute Name, Qualification Category etc
4. EmpQualificationTypeValues table with fields
QUalificationTypeValueID, QUalificationTypeAttributeID , QualificationCategoryID , EmpID, Value
QUalificationTypeValueID would be the primary key
for above case values would be like below
Employee
Emp ID EmpNo Name ...
ID1 12345 xxxxxxx
QualificationType
QualificationCategoryID QualificationCategory
CatID1 HIghest Qualification
CatID2 Post Graduate
QUalificationTypeAttributes
QUalificationTypeAttributeID QUalificationTypeAttributeName
QTAID1 Institute Name
QTAID2 Qualification Category
QTAID3 Year Of Passing
QualificationTypeValues
QUalificationTypeValueID QUalificationTypeAttributeID QualificationCategoryID EmpID Value
QTVID1 QTAID1 CatID1 ID1 Your institute Value set from screen for highest qualification
QTVID2 QTAID2 CatID1 ID1 Your qualification category Value set from screen for highest qualification
QTVID3 QTAID3 CatID1 ID1 Your year of passing value set for highest qualification
QTVID4 QTAID1 CatID2 ID1 Your institute Value set from screen for post graduate
QTVID5 QTAID2 CatID2 ID1 Your qualification category Value set from screen for post graduate
QTVID6 QTAID3 CatID2 ID1 Your year of passing value set for post graduate.....
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Create a magnifying glass on an image.

I am pretty new to Flex. I am trying to create a magnifying
glass for an image viewer. I want to move the cursor over an image
that will zoom in on a 200X200 area. I don't want to zoom in on the
whole image. I can see I can probably do it with the Bitmap class,
but I do not see how I can cut out a piece of the original bitmap
to display. Also, Flex seems to have a lot of similar features like
Zoom, but I can't see how to use any of these cool features to do
just what i want to do. Any help would be appreciated.
Thanks

The way I do this in Flash is to have a masked enlarged image
on a seperate layer with the magnifier acting as the mask. The mask
object is draggable, so it reveals to larger image as you move it
around. There is some math involved to make it track like it is
actually revealing the smaller image.
The layering looks like this:
mask object
large image
small image
mask is a property of flash.display.DisplayObject and
mx.core.IFlexDisplayObject. I haven't played with this yet in Flex,
but I'm sure it should work similarly to what I've used in
Flash.

Adobe premiere elements 12 - how to create menu bar action for my inserted image button

adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

How to make a magnifying glass link to a look up table ?

Dear Friends,
Hello. I am developing the accounting application of journal entry. In journal line, I use the image "magnifying glass" next to each chart field. When we click on the magnifying glass, it's supposed to come up a look up table( a chart and name mapping table), and we select the proper chart to input into the chart field.
I understand to create another record and page for the look up table. But I don't understand how to make a magnifying glass link to a look up table. Can anybody tell me how to do that ? Thanks.
Lucy

This is how it works,
Table A (which stores chart fields). You have used fields from table A on a page so that users can input data.
You don't need to put a magnifying glass image or create a new page to achieve look up page.
all you need to do is create another table say Table B which should have the chart field and corresponding description you want to show on lookup page. Then open record-field property of the chart field on Table A and mention Table B as prompt table.

Creating a Magnifying Glass graphic

Hello Everyone,
Anyone know how I could create a magnifying glass graphic using Adobe Photoshop?
I did do a search but it mostly came up with instructions or info on how to create one that'll also actually have a "magnifying" or "glassy" look to it.
While just I want to create a simple one, just containing a circle and an handle attached to it.
Kinda like the following:
http://www.iconfinder.com/icondetails/42437/32/alt_glass_magnifying_icon
And in case you're wondering why I don't use the above, I'd like to create one with my own colors.
I'd appreciate it. Thanks in advance!

Noel Carboni wrote:
The advice given above is great, but I'd like to toss out another idea: Search the web for stuff like:
magnifying glass Photoshop file
You turn up some very nice free PSD file downloads that you can open and see how the designers did their stuff. The first match with the above search in Google nets you a very nice example from psdgraphics.com.
-Noel
I'll second that. It always amazes me what you can find if you look. There must be a brush set for every contingency, for instance, and almost as many Shapes. I bet there is even a font out there that incudes a magnifying glass!

How to create a "Custom Color" for highlighting? (Acrobat XI)

March 10, 2014
How to create a "Custom Color" for highlighting? (Acrobat XI)
The numbers in the RGB and other fields change as various numbers are changed.
I wanted to create a pale orange:
Hue               13      Red      255
Saturation   240      Green 177
Luminosity    86       Blue     140
I'd selected one of the orange squares in the color grid, to display the general orange area of the slider.
I moved the slider to select a pale orange, which generated the above numbers.   Since this wasn't directly available to save to a Custom Color, I tried to edit the numbers. Unfortunately, the other numbers changed, making it impossible to actually create a color.
Any suggestions would be appreciated.
Note: I used Techsmith's Snagit to show screen shots in a Word document.
When I attempted to browse and upload the file, the error message said "[The content type of this image is not allowed.]"
OK...what images *are* allowed?

Hi Don,
I saw Gilad answered your question in another forum post.
Do you have everything you need at this point?
Let me know if you need further assistance.
Kind regards, Stacy

How to create a shortcut menu for the pane

Hi all
Well - I know how to create a shortcut menu for a control, but how is it created for a pane? There is the possibility to add an event case for a shortcut menu linked to a pane (see picture), but how can I create this menu?
Message Edited by becktho on 08-01-2006 11:32 AM
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
ScreenShot001.png ‏22 KB

ahlers option works, sorry but I can't add images from work!
Just use the shortcut Menu Activation filter event? to create a menu.
Ton
Message Edited by TonP on 08-01-2006 12:56 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_BD.png ‏4 KB
Example_BD.png ‏4 KB

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a magnifying glass for image details

Similar Messages

Maybe you are looking for