How to create a material grp

Hi all ,
I would like to know how to create material group and assign it to the particular material .
Regards
Raj

>
Arpit Shah wrote:
> Hi Raj,
>
> Use OMSF t-code to Create Material groups.
> You Can assign the Same to Material Master While creating it. It will be found in Basic Data1 tab.
>
> Regards,
> Arpit
Any added "Character" to Ashok's and my reply?except hi raj and regards arpit?

Similar Messages

How to create a material master with referrence to exsisting material maste

hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jai

Dear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh

How to create customer material information(vd51) and what is it's use

how to create customer material information(vd51) and what is it's use.
does it will work even in mm module also??
my requirement is such that...
my sap code is 235
where as customer will give purchaase order on code 536.when i am entering this 536 code in my system,automatically sytem should propse my sap code of 235.subsequently my inventory should reduce.

Hi,
the transaction for maintaining the customer material inforecord is VD51.Data on a material defined for one specific customer is stored in the customer material information records.
Features:
During order entry, items can be entered by specifying the material number used by the customer. You also enter a customer material number in the order view of the sales order. You can then use both material numbers during the order entry, the material number your company uses or the one defined by the customer, because the system can carry out allocation automatically.
If you maintain the plant in the customer material info record, the system will give priority for the plant maintained in the CMIR in the order.
Prase

How to creat service material

how to creat service material ?

Dear Jeevan
Go to MM01 and give respective material type regarding to service .
You have to use service item category group. Standards are LEIH or DIEN.
Please revert if do u have any clarifications
Thanks&Regards
Raghu.k

How to create the material using outbound IDOC

Hi all,
how to create the material using outbound IDOC.

Hi..
follow the steps...
1) create a partner profile for material
2) create a material
3) go to transaction BD10 , give material no and then execute.
4) go to transaction WE02 to chk the status.
if you want to send Outbound idoc automatically once the material is cretaed then use change pointers concept.
please get back to me if you need any assisstance further.
Regards,
Lokeswari.

How to create a material which can be used in T-Codes VAO1 & MB1C create

Hello Experts,
How can I create a material which can be used to create a sales order and can be used to create inventory using VAO1 and MB1C T-Codes respectively.
What are the configurations that I need to take care of, while creating it?
I need to create a material which can be used in the whole sales cycle(sales order,goods issue,billing and etc).
Please Help,
Thanks in Advance,
Suma

Hi
Thanks for your fast replies.. I have created a new material and was able to create inventory thru MB1C. But I was not able to generate a goods delivery(VL01N) and billing document(VF01) for the sales order.
Error: No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date chosen.
System Response
The system does not create a delivery item for this order item.
Procedure
Check whether the order item to be delivered contains confirmed schedule lines.
If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
Please suggest,
Tanks,
Suma
Edited by: Suma B on Sep 23, 2008 3:55 PM

How to create a materialized view on a subqueried view

Hi,
I have a view with subquery. This view is accessed by users frequently. I want to improve its performance by materialiezed view technology. Unfortunately, my view includes a subquery. does anyone have an idea how to create a materialiezed view on a subqueried view?
Copper

Oracle 9.2.0.4
SQL,
select
action,
id,
id0,
bl_ticker,
report_type,
published_date,
version,
decode(rating,'SBUY','Strong Buy',initcap(rating)) rating,
nvl(fairvalue,(select fairvalue from ard_published_v2_log where id=(select max(id) from ard_published_v2_log where bl_ticker=a.bl_ticker and id<a.id and fairvalue is not null))) fairvalue,
pricing_date,
price,
update_date,
nid
from
select * from ard_published_v2_log
union select * from nemo_published_history_corr where (action is null or action<>'D')
minus select * from ard_published_v2_log where action='D'
minus select * from ard_published_v2_log where id in (select id0 from ard_published_v2_log where id0 is not null)
minus select * from ard_published_v2_log where id in (select id0 from nemo_published_history_corr where action='D')
minus select * from ard_published_v2_log where id in (select id0_new from nemo_fillup_id0 where apply=1)
minus select * from ard_published_v2_log where id>0 and rating='N/A' and price is null-- and nid is null
) a
order by id desc

How to create a material for company code ??

hii
Is it possible to create material company code wise .???
If not , explain me the reason ??
Only plant wise is possible in standard SAP??
Thanks

Hello,
Their is no such Company code level data for material master. So material master can be maintained at three level 1) Cleint level 2) Plant level 3) Storage location level
Basic data 1 and Basic data 2 views-----General data --Client level data
Purchasing , MRP Veiws and ---Plant level data
General plant/Stor 1 and Stor 2---Storage location level.
SO you are having the only one company code then, you can say Client level data is company code data.
Regards
Mahesh Naik

Creating new Material Group

Hi SAP Gurus,
How to Creating new Material Group?
Regards,

Hi,
Go to OMSF and here click on "New Entries" button and maintain the Material Group and its Description and save.
Config Path: - SPRO > Logistics - General > Material Master > Settings for Key Fields > Define Material Groups

How to configure this material type We will treat it as consumable goods?

Dear Experts,
How to create new material type which we will treat as consumable goods?
Also, for all purchase, we want to have the GR Non-valuated checked so that the actual cost will not have effect after goods receipt but will be effective when the invoice has been entered. No inventory will be used. We will treat it as other consumable goods.
For GR Non-valuated, it means the actual cost will not happen in goods receipt only.
we will create po and gr and invoice and payment. can you tell me what we have to pay attention to ?
Best Regards,
Merry

you can use material type UNBW, because its having non valuted ticket and quantity updation also not there, and you can do PO, GR, Invoice and payment as a normal process, but the only difference is when you do GR the value of that GR is immediately charge out to an account or cost center including quantity. but you will do the MIRO to clear GR/IR account.
regards,
qsm sap

Advice to create a material type (Semi finished, finished or spare parts)

Hello all!
I am facing a big problem to how to create a material type ?
In my case, this material (engine) is finished good in one plant (let's say 100) and in the same time it's considered as Semi finished good in another plant (200 for example) and we can also sell it as spare parts (plant 200).
So, i don't know if i will created as finished good or semi finished or spare parts in MM01 transaction? What do you think?

Lamine,
Creating an material with type as Semifinsihed and Extending sales view to the article will solve your problem.. Also according to your scenario, i hope you are using SPK for transfer of SEMI FInished Goods from Plant 100 to Plant 200. If this is there in the MRP view. you will not have any problem in this scenario. You can directly sale from Plant 100 and During MRP run for Plant 200 the material will be used in Plant 200 as Semifinished. Also as Sales view is extended in Plant 200 you can also sell it as Spare parts.
Regards,
Vinod Kapote.

How to create excise invoice without material document

Hi,
I want to create excise invoice for a subsequent credit note. I am agreed to give additional amount to my supplier for which i have not paid to him, now when i issue a subsequent credit note, how to create a excise invoice and do the excise entries without a material document.
Please suggest a solution
Regards,
Ashish

Go to T Code J1IH.
Select Additional Excise. Replace the document number by the vendors excise invoice. Enter the excise duties in lower box and click on Determine GL accounts button to simulate and then post.

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

HOW TO CREATE MATERIAL CODE IN MATERIAL MASTER

HI SAP GURU'S
As i m fresher in SAP-mm , can somebody guide me how to create materials in MM01, because in my company they told me to create some materials . For this which r all modules help i need , because in mm01 select views somany r there. IN that views it is asking cost center , G/L account, mrp 1, 2,3.. etc.
In Realtime how the MM01 WORKFLOW.. PLEASE HELP ME basically and clearly...
bY
MM SAP

Hi,
to start with you have to know some basic things, like if the material is for procurement then you enter as follows :
1. Material No' - Whether internal or external, give as set.
2. Industry Sector :- what kind of industry sector for the material.
3. Material type :- whether raw material or semi-finished, etc.
4. Select views :- Basic views required are Basic Data, Purchasing, Plant and Storage, Accounting1 and if subjected to MRP, select MRP view 1,2.
5. Specify your plant / storage loc'n in Organizational details.
6. Basic data - give Desc and various basic parameters for the material.
7. Accounting view - get the valuation class for your material type from FICO and enter the class. Also select valuation price either S or V depending on your requirement.
8. MRP view give the type of MRP you are using usually it will be manual re-order Pt plgg, Ro-order Point, MRP Controller for your plant, Lot size details.
Hope this will give you some idea for MM Rec creation.
Reward if found useful.
Anand

How to create a material grp

Similar Messages

Maybe you are looking for