How to create a metric in BOXI R3 performance Management
Hi All,
Can any one tell me how to create a metric (goals and calendar) in BOXI R3. In BOXI R2 there is a separate module where we can create metrics, golas and calendar... Is there any separate module like that in BOXI R3 or not. When I logged into infoview then I'm unable to see the module which I had earlier mentioned. Is this any thing related to Admin access or not.
Thanks in advance,
Suresh Aluri.
Hello Suresh,
I am not sure exactly what you are refering to, but in case :
In Infoview of XI 3.x, you have to click on "Open->Dashboard and analytic" then "performance Manager->Metrics".
I recommend you to read the well-done "training" PDF "xi3-1_getting_started_performance_manager_en.pdf"
The PDF should be on SAP site.
Samuel.
Similar Messages
-
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create a custom plugin in Oracle Access Manager to create a cookie
How to create a custom plugin in Oracle Access Manager to create a cookie or Header Variable..
VipinIts has more steps which you need to consider in addition to Note:101048.1 which is mentioned by Prashant_Pathak. Both notes have enough information. If not, let's know what else you need to set
-
How do i create a new substatus in OSA (performance management)
how do i create a new substatus in OSA (performance management)
Hi,
Please create substatus through transaction code OOHAP_BASIC. Select u201Csubstatusu201D folder from the left column.
Hope this helps.
Donnie -
How to create Rfc for EP system in Solution manager
Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving " NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhirajHello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY TAGGED
- WBO_REL_REQ_STRATEGY MANUAL
For quality and production Java system (target systems):
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ -
How to create a learning certification in oracle learning management
Hi all,
can any body know how to create a lerning certification in oracle learning management.
thank you.Hi,
Please refer to [Oracle Learning Management User Guide |http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115olmug.pdf], Page 2-13 Learning Certications.
Regards,
Hussein -
How to create a new output type in inventory management
dear consultants .
how to create a new output type in inventory management...........?
please give me a solution
regards
ratanRefer:
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/attaching-smartform-to-the-standard-transaction-2316027 -
How to create a drop down box and text box in screen painter?
Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
mark type c , "This is to select the record.
matnr like mara-matnr ,
matkl like mara-matkl,
maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O -
How to create Auto complete text box in share point 2010 Visual web part
Hi All ,
I am want to use Auto complete text box in share point 2010 Visual web part ,data need to get from share point list how to create
please guide me how to use Auto complete text box
Thanking you,
Arun DarlyHi Arun,
Please refer to the following article.
SharePoint 2010: JQuery Autocomplete Textbox Containing List Items
http://smarttools.codeplex.com/wikipage?title=Autocomplete%20Text%20Field
Please don't forget to mark it as answered, if your problem resolved or helpful. -
How to create a frame or box to surround a element
Hi,
Would appreciate some help on this one, as I can't seem to figure it out.
How do you create a frame or box to surround an element, for example when using Hazardstatements.
The only way I can think of is to use tables, but is there any other way?
Example:
Danger
Some warning text
Some warning text
Thanks
Best regards
RonnyHi Ronny...
It's of my opinion that there while you may want this content formatted as a table when published, you should not be authoring the content with a table to achieve that formatting. This type of formatting should be applied as a "publishing process" after the DITA topics are assembled into a FM book and FM chapter files. If you're publishing to other formats (like HTML), the formatting can often be achieved through CSS or by other publishing processes. You don't want your source files to enforce some type of formatting that may differ depending on the deliverable.
You may want to set up some ExtendScript wrapper that performs various pagination and formatting tasks to your generated FM files. While you can use ExtendScript to actually wrap the hazardstatement in a table, you can also look into using other tools such as FrameSLT (from West Street Consulting), or Structure Snippets (from Leximation, my company).
http://www.weststreetconsulting.com/WSC_FrameSLT.htm
http://leximation.com/tools/info/structuresnippets.php
Cheers,
Scott Prentice
Leximation, Inc.
www.leximation.com -
How to create an editable List box
Hi,
Can any body help me out in creating an editable list box, I mean the options should be editable in the listbox. Thanks in advance.I mean, you have dropdown list box with some options.
They will not be editable in the normal scenario. I want one of the options to be editable, similar to a textbox , when selected.
Is that possible in JSF? If any one could help with Javascript also, its fine for me. -
How to create a new check box using form personalization.
Hi Frs,
I have a requirement to create a new check box in AP form using form personalization.
Pls help me in achieving this.
Note: we have to use only form personalization not custom.pll.
Thanks
RajeshPl see ML Doc 420518.1(Limitations of Forms Personalization) for a list of things you cannot do with personalization - among them is creating new form objects such as checkboxes.
HTH
Srini -
How to create a Sub case in Adaptive case management.
Hi,
Can you please provide an example or more info about creating a sub case in Adaptive case management.
Documentation says
"Sub cases are deployed as a separate composite from the parent case project. They are linked to the parent using the case link mechanism. The sub case composite version is always the active version of the parent composite". This is exactly what I want.
I created a Sub Case following the steps mention in the documentation. It created it under the case activities. I want to know how to link it to a process or composite. In the advance section it specifies a project name and case name. How do I link it? Please help me with an example on how to create sub case.
ref:- https://docs.oracle.com/middleware/1213/bpm/bpm-develop/case_mgmt_bpmpd.htm#BPMPD87407
Thanks
AnilOn the Case UI within BPM workspace there should be a place to link cases.
Also have you looked at the following API ICaseInstanceService (Oracle Fusion Middleware BPM-Services Java API Reference for Oracle BPM Suite)
oracle.bpm.casemgmt.ICaseInstanceService
addCaseLinkboolean addCaseLink(IBPMContext context, CaseLink caseLink) throws CaseServiceExceptionAdd a case link
Parameters:
context - an IBPMContext value
caseIdentifier - a CaseIdentifier value
caseLink - a CaseLink value
Returns:
a boolean value
Throws:
CaseServiceException - if an error occurs -
How to create an advanced search box (inside my website) with Adobe Muse cc ?
help
Hello,
Please try the suggestions and the widgets in the links below.
http://www.muse-themes.com/blogs/news/14113125-beautiful-site-search-in-adobe-muse-swiftyp e
How to use the Addsearch widget
how do you create a seach box in MUSE?
Regards
Vivek -
How to create non-modal dialog box?
I'm trying to create a non-modal dialog box. The purpose is to show an alarm for the user but should leave the calling VI continuing to run. I have created such a thing -- the problem is that I can't figure out how to get the dialog box to go away! It stops running but the window just hangs around. See the attached VIs and image.
Thanks in advance for your help,
Chad
Attachments:
alarm_ui.png 11 KB
alarm_ui-2.vi 11 KB
message_to_user.vi 11 KBOk, I've attached the files. Thanks for looking at this.
Chad
Attachments:
alarm_ui-2.vi 11 KB
message_to_user.vi 11 KB
Maybe you are looking for
-
How can I get my music off my nano and into my itunes library?
We did an erase/install on our imac and forgot to back up the itunes library. Thankfully my music is on my ipod, but how do I get it back into my library?
-
Where is the location of the trigger's message
I want to find the following trigger's message , as well edit it. U2$FORM_ERRORS.PUSH('CON-12210', 'I', 'OFG', 0); RAISE FORM_TRIGGER_FAILURE; ***message content like that "information:your invoice data is not found for this query..."*** I couldn't s
-
Adobe Air not work on Mac OS X Yosemite
Related issues: Adobe Air not working on Mac since OS X Yosemite upgrade Adobe Air isn't working with Mac OS X Yosemite? Bug report: Bug#3847656 - Adobe Air not work on Mac OS X Yosemite When I try to install any AIR application on OS X Yosemite (upd
-
Will lightning connector sync ipod classic to new macbook air
I am using 30 pin usb 1 connector with 5th grn ipod classic to sync with new macbook air, but computer rejects ipod connection with explanation usb 1 does not sufficient power to sync wih macbook. thanks in advance
-
Can't find 7510 Photosmart after updating Mac to OS X Yosemite
Since updating to OS X 10 Yosemite, my 7510 Photosmart has not worked via wireless connection for printing or scanning. I've uninstalled everything and reset the printers. I've now tried to reinstall, but HP Utility still can't find the printer wirel