How to create a mono output from a mono aux send?

Trying to create a mono output from a mono aux send but option available is only a stereo output. Any way to force a mono output?

Yes - I'm aware of the mono vs stereo. Let me outline more precisely what I'm attempting to do. (By the way, I know this can be done as I do it easily in MOTU's Digital Performer.) The desire is to create a mono send inside Logic that I can then send out through my MOTU interface into a Lex 300 reverb unit. I then take the analog outputs from the Lex 300 and bring them back into Logic. I want the send to be mono as I am mostly sending from mono recorded instruments and voices. So chain would look like this:
Track 1
Send Bus 8
_Bus 8 Mono output_
MOTU 2408 Input
Patch Bay cable
Lex 300 Mono input ///
(now coming out)
Lex 300 Stereo Out
patch bay
MOTU Stereo Inputs 15/16
Logic Stereo Input 15/16
Mix.
The problem with the chain is that I cannot select a _mono output_ - it only allows for a stereo output. I can pan it one way or the other but it still does not seem to function correctly and toggling the mono/stereo button does not change the fact that this is still a stereo output. I hope this does not make it more complicated - it seems like there should be a simple solution. Any ideas? Thanks.

Similar Messages

How to make dual mono output from one mono track

Please forgive my complete ignorance of music mixing/sound board terminology: I'm only using Logic Pro X because Apple deliberately made it impossible to use Soundtrack Pro as part of a roundtrip with FCPx. Soundtrack Pro is what I've always used for editing audio for video.
I recorded two tracks with the video: microphone on the right and and lavalier on the left. The mic was just a backup and the lav track is what I want to use. I imported the audio into LPx and now I want to use only the left channel but I want it to output equally on both channels. I've searched all over for a simple explaination (at least one who is not a music editor can understand) and haven't found one.
How can I do this? Thanks.
Second question: I found the little icon that lets makes the timeline scroll to follow the playhead (ridiculous that FCPx doesn't have this) but I can only make it work for one clip at at time. Is there a way to turn it on permanently?

On the Channels Strip (of the Audio Track with the Audio Region), ctr+click on the left segment of the Input Button. That opens a popup menu where you can select Left (only the left channel of the Audio Region is played as mono), or Right (only the right channel of the Audio Region is played as mono).
Once the signal flow of the Channel Strip is mono (one channel), you can use the "Mono➤Stereo" version of some plugins to convert the Channel Strip to a stereo channel.
About your second question. If you are referring to the little blue "Catch Playhead Button", that automatically scrolls the Workspace when the Playhead reaches the right border to keep the Workspace visible. You also can also enable the "Scroll in Play" mode in the local View Menu. That one locks the Playhead in the center and scroll the Workspace "underneath"
However if you are referring to that little Play icon in the left upper corner of the Region Header (only visible in the Editor), that one, the "Solo Play Button", only plays that Region in solo mode. It is basically a combination of "Play " and "Solo" in on button. You can find all those little informations and much more in my graphically enhanced manual "Logic Pro X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to Create an XML document from XSQL servlet which follows a particular DTD struct

how to Create an XML document from XSQL servlet which follows a particular DTD structure.Could anyone send me a sample code for this.

You'll need to associate an XSLT transformation with your XSQL page that transforms the canonical result into your DTD-valid format.
For example, given an XSQL page like:
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="rss.xsl" ?>
<xsql:query max-rows="3" connection="demo" xmlns:xsql="urn:oracle-xsql">
select title,id,description,url,to_char(timestamp,'Mon DD') timestamp
from site_entry
order by id desc
</xsql:query>and an "rss.xsl" stylesheet that looks like this:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" indent="yes" doctype-system="rss-0.91.dtd"/>
<xsl:template match="/">
<xsl:for-each select="ROWSET/ROW">
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
<xsl:for-each select="ITEM">
<item>
<title><xsl:value-of select="TITLE"/></title>
<link><xsl:value-of select="URL"/></link>
<description><xsl:value-of select="DESCRIPTION"/></description>
</item>
</xsl:for-each>
</channel>
</rss>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>You produce DTD-valid output against the rss-0.91.dtd DTD that looks like:
<?xml version = '1.0' encoding = 'UTF-8'?>
<!DOCTYPE rss SYSTEM "rss-0.91.dtd">
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

How to create an XML document from a String.

Can anyone help,
     In the Microsoft XML Document DOM there is a load function load(string) which will create an XML document, but now we are switching to Java and I do not know how to create and XML document from a string, this string �xml document� is passed to my program from a webservice and I need to read several xml elements form it in a web server.
This string is a well formatted XML document:
<?xml version="1.0" encoding="UTF-8"?>
<Countries NumberOfRecords="1" LanguageID="en-us">
     <Country>
          <CountryCode>AU</CountryCode>
          <CountryName>AUSTRALIA</CountryName>
     </Country>
</Countries>

Thanks PC!
I made it work using:
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
factory.setIgnoringComments(true); // We want to ignore comments
// Now use the factory to create a DOM parser
DocumentBuilder parser = factory.newDocumentBuilder();
//TransformThisStringBuffer is a string buffer wich contain the 'XML document (String)'
InputStream in = new ByteArrayInputStream(TransformThisStringBuffer.toString().getBytes());
// Parse the InputStream and build the document
Document document = parser.parse(in);
But which one is faster InputSource or InputStream, were would you put the "new InputSource(new StringReader(yourString))" in the above code?

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

How to create a .DLL file from a .C file ?

Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip ‏37 KB

Hi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager

How to create a standby redolog from rac to non rac ??

Hi,
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
pls help

854393 wrote:
Thanks Shivanandha,
(maximum number of logfiles for each thread + 1) * maximum number of threads
Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
Hope This helps.

How to create collective invoice output

hi frnds
I have created 50 invoices in (VF01). How to create collective invoice output. What is the procedure?
regards

(Assuming you want to print all the 50 invoice)
Use VF31.

How to create a boot disc from Lion pre installed into my Macbook Pro 2011 ?

Hi guys,
I want to know how to create a boot disc from Lion pre installed into my New Macbook Pro ?
I want to re-install the Lion from zero. When I bougth it I´ve used the Migrant assitance and now I want to re-install the Lion. How can I do it ?
thanks.

Read this about creating a lion recovery on an external drive or USB stick.
http://support.apple.com/kb/HT4848
/Dennis

How to create a p7c format from a pem or der or cer

Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh

On Windows double click the der or cer certificate. This should open it in the
Certificate viewer.
Open the Details tab, click on the Copy to File button and select pkcs #7 format.
Pavel.
"Subodh" <[email protected]> wrote:
>
Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html
and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh

How to create A/R Invoice from draft

Hi,
How to create A/R Invoice from documnet draft using DIAPI.
Thanks,
P.Suresh Kumar

Hi Suresh Kumar,
You may check this as a reference: Re: Problems while saving the tax values in a Draft Document to AP Invoice
Thanks,
Gordon

How to create a purchase requisition from the EP

1. How to create a purchase requisition from the EP & What are the pre-requiste?

Hi,
You need to create a SAP transaction iview for purchase requisition transaction and link it to the role and to the user to view purchase requisition transaction.
First you need to create a system in portal to link to the R/3 system. For creating system check this link.
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
For linking portal with R/3 and view the Purchase requisition check this link
Configuring EP for connecting to SAP R/3
Regards
Arun

How to create a mono output from a mono aux send?

Similar Messages

Maybe you are looking for