How to create a mult-server server farm?

Hello Community
    Let's say you create your Sharepoint 2013 Server farm.
    How do you create a Search and Application Server on a separate physical
server and how do you create an SQL Server on a Separate physical Server
and finally adding those Search and Application Server and SQL Server
to your Sharepoint 2013 Server farm?
    Thank you
    Shabeaut

Hi,
Once you are done with SharePoint installation on one server you are going to add further Application server or Web front end server as per your requirement and finally you will configure the service on your farm.
For setting up the multitire SharePoint farm first of all you need to install the below given prerequisites on
one server.
Microsoft .NET Framework 4.5
Windows Management Framework 3.0 (CTP2)
Application Server Role, Web Server (IIS) Role
Microsoft SQL Server 2008 R2 SP1 Native Client
Windows Identity Foundation (KB974405)
Microsoft Sync Framework Runtime v1.0 SP1 (x64)
Windows Server AppFabric
Microsoft Identity Extensions
Microsoft Information Protection and Control Client
Microsoft WCF Data Services 5.0
Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
After installing the SQL server you Just run the SharePoint product and technologies configuration wizard and follow the steps
to add a sever to an existing farm.
Actually as per your question you need to set up a three-tier farm configuration consists of two front-end web
servers, an application server, and a database server. The deployment sequence and configurations that are described in this article are based on recommended best practices. While the farm configuration is not complex, it provides a fundamental infrastructure
to implement a SharePoint 2013 solution on similar — or more complex farms.
In this article:
Overview
Prepare the farm servers
Install SharePoint 2013 on the farm servers
Create and configure the farm
Add web servers to the farm
Post-installation steps
Please feel free to reply back if you stuck somewhere or need any specific help.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

Similar Messages

How to create file on application server?

how to create file on application server?

Hi,
The following program illustrates the creation of ifle in app server and reading the file from appli server:
DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBAP-VBELN.
START-OF-SELECTION.
SELECT *
    FROM VBAP
    INTO TABLE ITAB
WHERE VBELN = P_VBELN
    PERFORM WRITE_DATA.
    PERFORM READ_DATA.
*&      Form WRITE_DATA
      text
--> p1        text
<-- p2        text
FORM WRITE_DATA.
OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
LOOP AT ITAB.
TRANSFER ITAB TO 'VBAP_DATA'.
ENDLOOP.
CLOSE DATASET 'VBAP_DATA'.
CLEAR: ITAB, ITAB[].
ENDFORM.                    " WRITE_DATA
*&      Form READ_DATA
      text
--> p1        text
<-- p2        text
FORM READ_DATA.
OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
DO.
READ DATASET 'VBAP_DATA' INTO ITAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB.
ENDDO.
CLOSE DATASET 'VBAP_DATA'.
LOOP AT ITAB.
WRITE:/ ITAB-VBELN,
        ITAB-POSNR.
ENDLOOP.
ENDFORM.                    " READ_DATA
If it is helpful rewards points
Regards
Pratap.M

How to create the multi-realm (or multi-entries)in one Directory instance?

how to create the multi-realm (or multi-entries)in one Directory instance?
I have installed a new iplanet Directory Server 5.2 on a win2k box, named "vp.com1.com"
When I installed this server, it helped me to create a new Directory server instance with the default realm "dc=com1,dc=com".
I could log on console and found root node, which is "com1.com"
expanded this root node, I got a tree as following:
"com1.com" -> "vp.com1.com" -> "server group" -> "Directory Server(VP)"
Then open "Direbory Server(VP)" -> click tab "Directory"
Got a tree as following:
vp.com1.com(389) --> dc=com1,dc=com
o=NetscapeRoot
Now I wanna create a new entries, which is "dc=com2,dc=com"
How to do?
I had checked almost all the related doc but failed to get the valuable info.
Would you like to do me a favour? Or forward me some reference?
Because I'm a new guy for iplanet Directory Server, would you pls me the help in detail.
This task is very urgent for me, so really appreciate your early help!

Look on page 87 of the Sun ONE Directory Server 5.2 Administration Guide. The section "Creating a New Root Suffix Using the Console" should give you step-by-step instructions.

How to create a multi select drop down filed in crm 7.0

Hi All,
I need to create a multi select drop down field in crm web ui where one field have 7 value and we can select more than one value at a time.I have no idea how to create a multi select drop down field in web ui.
Please help.....

Hi vishwas
Please follow the thread where a similar requirement was posted.
Re: Drop-down list box / pick-list with multiple selections at a time
Here the suggestions say that a workaround could be to associate a table view to the field.
Regards,
Nisha

How to create a multi-line table/column comment

Can someone tell me how to create a multi-line table or column comment?
Apparently, the concatenate operator (||) does not work with the COMMENT statement.
I've searched the Oracle manuals and couldn't find an answer.
COMMENT ON TABLE sometbl IS 'i would like to break up this comment into several lines in order to improve readability'; Effectively, this is what I'd like to do (but it doesn't work):
COMMENT ON TABLE sometbl IS
'i would like to break up ' || CHAR(10) ||
'this comment into several lines ' || CHAR(10) ||
'in order to improve readability' || CHAR(10); Oracle version is 10.2.0.4

Why not just
SQL> create table t (a int)
Createtable successfully completed.
SQL> comment on table t is 'i would like to break up
this comment into several lines
in order to improve readability'
Commenton successfully completed.
SQL> select * from user_tab_comments where table_name = 'T'
TABLE_NAME           TABLE_TYPE COMMENTS
T                    TABLE       i would like to break up
                                 this comment into several lines
                                 in order to improve readability
1 row selected.?

How to create a multi-page collapsible & CSS styleable table of contents box?

How to create a multi-page collapsible & CSS styleabe table of contents box?
Is there a tool available for Dreamweaver or for standalone operation that can create for multi-page articles a collapsible & CSS styleabe table of contents box based on the page titles?

You could do this with jQuery.
Table of Contents -
http://www.downloadjavascripts.com/list/javasiteccc68/Details.aspx
Collapsible Panels, Tables & Accordions -
http://www.downloadjavascripts.com/Collapsible_And_Free_Accordion_Panels.aspx
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How to create a .mdf SQL Server database from a Data-Tier Application file that has data?

This is a noob question, though I do use SQL Server databases all the time with Entity Framework when I code in C# using Visual Studio 2013. The development environment is found below at [A]. I am trying to make a clone of a SQL Server 2008 R2
database (.mdf) that exists online. I can read, connect and work with this database in Visual Studio 2013, but I wish to make a local copy of the database, as an .MDF file. Somewhere in my notes I have a way of creating a local copy from
an online database when using Visual Studio but I forgot how (it seems, reviewing my notes, that it deals with ADO.NET which is deprecated in Visual Studio 2013 these days, or so it seems). So I'm looking for another way. What I did was create
(or export) a "Data-Tier Application File" from the online SQL Server database, with data, and it seems to have worked in that this Data-Tier Application file exists on my hard drive and seems to have data in it ("SQL Server Replication Snapshot"
is the format it seems). It contains skeleton code to create a database, but when I tried to execute it with SQL Server 2014 Management Studio, I got a bunch of errors.
So my question is:
1) Can I somehow create a .MDF SQL Server Database from an Data-Tier Application file that has data? What tool do I use? I saw this link, http://social.technet.microsoft.com/wiki/contents/articles/2639.how-to-use-data-tier-application-import-and-export-with-a-windows-azure-sql-database.aspx
and it relates to Azure, but is there a tool for C#Visual Studio 2013, standalone?
2) If there's an easy way to create a .mdf SQL Server Database file from an online file, within SQL Server Management Studio? I don't think so, since it would require Administrator permissions on the online server, which I don't have. I have permission
to read, update, delete the online database file, but strangely not to download it (the service I use has a tool for backup, but not for download).
3) same question as 2), but for Visual Studio 2013? I don't think so, since I notice none of the templates even mentions ADO.NET anymore, but instead they go with Entity Framework. Using EF I can of course do anything I want with the online database
(CRUD), but it remains online. Maybe there's a switch to make a local copy? I guess I could write a short program to suck all the data out of the online database and put it into a new, duplicate database having the same tables, that I create on
my localhost, but my question here is if there's an easier way than this, maybe a tool or command I can run from inside Visual Studio?
Any advice on any of the above questions is appreciated.
Thank you,
Paul
[A] Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Microsoft Web Developer Tools 2013   2.0.40926.0
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools

Thanks but these links are too general to help.
"2. what do you mean by online file?" - I mean the SQL Server database file is on a remote web server that I rent from, but I am not the administrator of. I can access my database using SQL Server Authentication, but nothing more.
Paul
What do you mean by too general? It explains on how you can use data tier application to create and deploy databases
May be this will help you to understand better
http://www.databasejournal.com/features/mssql/article.php/3911041/Creating-Data-Tier-Applications--in-SQL-Server-2008-R2.htm
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to Create an Oracle BAM Server Connection?

I m following the steps at the end of this post to create the connection but at the end I m getting this message from JDev:
{Unable to write to
/C:/JDeveloper/mywork/Application1/.adf/META-INF/connections.xml
because it is a read-only. Either make it writable or allow it to be made writable through source control.}
it creates the directory C:/JDeveloper/mywork/Application1/.adf/META-INF/ with only a adf-config.xml file but NOT the connections.xml any one knows what is wrong?
Bellow is the stpes I m following. Its exactly what is written at the Oracle Fusion Middleware Developer´s guide for Oracle SOA Suite 11g Release 1(11.1.1) E10224-01
To create an Oracle BAM connection:
1. Select New from the File main menu in Oracle JDeveloper.
The New Gallery dialog opens.
2. Choose Connections from the General category.
3. Select BAM Connection in the Items list, and click OK.
The BAM Connection wizard opens.
4. Provide a name for the connection. Leave the Create Connection In selection as
Application Resources.
5. Click Next.
6. Enter the following connection information about the Oracle BAM instance.
7. Click Next.
8. Test the connection by clicking Test Connection. If the connection was successful,
the following message appears:
Passed.
9. Click Finish.
Note: You can create connections to Oracle BAM in the Oracle
JDeveloper Resource Palette as well as the Application Resources
panel of a specific application. It is recommended that you create these
connections in the Application Resources pane rather than the
Resource Palette.
Field Description
BAM Web Host Enter the name of the host on which the BAM report server and
Web server are installed. In most cases, the BAM Web host and
Oracle BAM Server host are the same.
BAM Server Host Enter the name of the host on which the Oracle BAM Server is
installed.
User Name Enter the Oracle BAM Server user name (typically bamadmin).
Password Enter the password of the user name.
HTTP Port Enter the port number or accept the default value of 8888. This is
the HTTP port for the BAM Web host.
RMI Port Enter the port number or accept the default value of 9085. The
RMI port is for the BAM report cache, which is part of the Oracle
BAM Server.
Use HTTPS Select this check box if you want to use secure HTTP (HTTPS) to
connect to the Oracle BAM Server during design time.
Otherwise, HTTP is used.
Message was edited by:
Mario.Mesquita

Ok that will be nice, but is not the case I dont want to read the tutorial, the problem is I already start to read and execute the tutorial you told me the problem is this tutorial it doesnt show how to do everything from scratch because you already have inside the zip file everything like xmls etc etc, and I want to get my DO and create the process myself, I dont want to get something that it is already done, this tutorial does not show for example how to create this composite.xml, this file it is already inside the zip file, so this way I just follow half of the process and dont learn how to make the whole process.
tks

How to create a file in server's current directory

hi,
I have a project, but when i will run my program on internet Explorer then
it will create a folder in server's current directory, but i will not specify
drive & folder, it will create a folder in server's current directory, after that
i will read file from that, what will be the solution of this ? Is there
anyone who can give me solution? PLease help me
With regards
Nahar

ServletContext context = session.getServletContext();
String realContextPath = context.getRealPath(request.getContextPath());this will give you access to the servlets current directory
from there you can create a file
I dont know how much this will help

How to Create A standalone Report Server and replce by in process server

Hi all,
I am new to oracle reports 10g, I have installed oracle applicaction server 10.1.2.0.2 on RHEL4 now i want to create a standalone report server and replace it by the in-process report server . I searched the net to get a proper step by step guide to do the above but dint got the same can anybody guide to step by step process to do the same and also file which are to be edited i user sh rwserver.sh -install server name bath=yes command and sh rwserver.sh server name bath=yes & commad to start it but i am not able to see the same in the enterprise manager . Thanks in advance...
Also please tell me if it is recommeded by oracle to replace the standalone by inprocess server.

Hi do i need to fire the following the command then
sh rwserver.sh -install server name bath=yes
sh rwserver.sh server name bath=yes &
are these correct
and then fire the following command to register it to enterprize manager
ORACLE_HOME/bin/addNewServerTarget.sh reports_server_name
Please correnct me if i am wrong
ANd i already fired (sh rwserver.sh server name bath=yes & ) command which in turn create a fine name server name.conf in th ORACLE_HOME/report/conf
now can i fire ( sh rwserver.sh -install server name bath=yes ) this command or there is some issues in that.
what should be sequence of firing these commands
and to test it after completing the activity
Edited by: Mohammed Afzal on Jun 30, 2011 4:26 PM
Edited by: Mohammed Afzal on Jun 30, 2011 4:28 PM

How to create a multi-language site?

Hi,
what's the smartest way to create a multi-language site with the naviation menus only in English OR French OR German…? By creating one site and duplicate the .muse file?
Thanks a lot!

No
Depending on how simple your site is you can get away with it easy with common languages based on latin all in CSS and Javascript as the words within the sentences will mostly be in the same places. For other languages such as Japanese to English or right to left languages you would be better building different templates in a subdirectory as links and other things will start to move around.
You also have to design around multi languages as well, as words in other languages might be longer and could break your design.

How to create a multi video player with iMovie

Hey folks, I have a great wee QT player for my daughter's website which was generated for me by iMovie export. Lovely.
But- folk are wanting to see more videos of her singing.
Question- how to generate a multi-video player using the same principles (and same simple design)? One like those generated by YouTube's facility to create a list of videos to appear in a single player, or where it is possible to just click a "next" tab? Here is the page I am referring to: http://www.brigidmhairi.com/music.html
Just to clarify- I am not wanting to use the YouTube player because it is a bit fussy and doesn't look right on the site in mind. The QT one has no borders etc and therefore suits me better. Besides- the 320 format is perfect.
Hope someone can help me, thank you SO much.

MacBraveheart wrote:
.. how to generate a multi-video player using the same principles (and same simple design)? .. Here is the page I am referring to: http://www.brigidmhairi.com/music.html..
Hope someone can help me, ..
Hi HighlanderIn ..
who else than me.. ?
this is no iMovie related question.. that is
a) html/CSS-coding or
b) some flash-app
read out the code on your linked website ... :
<embed type="application/x-shockwave-flash" src="http://cache.reverbnation.com/widgets/swf/33/videogallerywidget.swf
pageobject_id=artistxxx bla bla bla /><br/>
<a href="http://www.reverbnation.com/main/artist_feature/widgets">
bla bla bla ..
</noscript>
.. going to that website reverbnation.com, it looks like they offer, as YT, a video-hosting service plus that 'special' player as a flash-code you can embed in your website (as the YTplayer) ..
so, here are your options:
• use this service.. costs? no idea, research on your own ..
• use flash, encode yourself.. perhaps, you can find some 'ready made' coding?
• *what website-maker do you use?* iWeb offers a template for videos.. many on one preview-page, 'click' creates a bigger version for playback ..
.. as mentioned: less iMovie, more 'website creation' ..

How to create...integrated server.....?

while practicing..on XI3.0......i deleted all the business systems..in SLD..
and i'm not able to see related integrated server...when i'm creting..Business systems...
what i hav to do.........help regarding this...plz...

Hi,
create the business systems again in SLD according to configuration document of XI 3.0
check Connecting Business Systems with an Integration Engine to the Central Integration Server in document
https://websmp204.sap-ag.de/~sapidb/011000358700001697502004E.PDF
regards,
kaushal

How to create an email list server solution with java

hi all
I would like to create a email list service with java.
(when I say email list service, I mean , you send email and everyone who subscribes to the list receives the email automatically or the email is held in a queue for approval )
this solution would have to be integrated with the emailing standards .
Could someone share with me how one would create a list service with java and how it would work with the email and pick it up ?
stephen

or if there is an open source solution please let me know
stephen

How to create a multi-level configuration sales order?

Hi,
    My client use configurable material to sell computers. And the production mode is MTO. One sales order item correspond with a production order
    Now my client also sell array which consist of two computers, two storage, one UPS power etc. That means I must realize multi-level configuration. First, choose the computer type. Second, based on the choosed computer in first step, choose the cpu, disk and so on. And then based on the sales order item, there must be several production order related to the same sales order item.
    Now I have semi-finished product B1,B2--computer. Class type is 300. Many characteristics is allocated to the class. B type material has the BOM which consist of cpu,disk etc.
    Then I created the finished product A--array. Class type is 300. Allocated characteristics is the B1,B2. A has the BOM which consist of B1,B2 etc.
    When I create sales order, I can only config the first level,choose computers for A, can not choose cpu,disk for computers.
    So, how can I find a solution for this scenario?
    Thanks in advance.

Thanks, Waza
1. Does the Sales order BOM explode in the sales order?
No. Just one top item would be ok for my client.
2. Why do thy want this in the sales order? They can explode the BOM in the production order, do they then need pricing at the component level?
They do not need pricing at the component level. Exploding the BOM in the production order is acceptable. But how can I config the configurable material in components of production order?
I tried collective order, but the second level of configurable material can not generate production order. I just make use of special procurement 52 in MRP2 of top finished product. Is there something I missed?
Thanks again.

How to create a mult-server server farm?

Similar Messages

Maybe you are looking for