How to create a new Characteristic and Key figure ?

Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay

Similar Messages

How to add the required characterists and key figures to drill down report?

hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How to create a document on a characteristic and key figure combination?

Hello,
I will need to create for my customer a document on a characteristic and key figure combination. I don't know yet which BW objects will be concerned, but I'm trying to understand how it works.
1) I call the document screen in RSA1.
2) I select InfoProvider data.
3) I click on Create, enter a name and a description and go to the next register (Log.DOc.Properties).
Question: What do I need to select here?
According to SAP Help, the following has to be maintained:
InfoProvider: How can I get my cube diplayed in the list?
Query: Same question. But is it necessary to select a query?
Key Figure: OK
All characteristics for which the Characteristic is Document Property indicator is set: OK
Hide Name: OK
Thanks in advance for you help, Nathalie

There's a link on the main support.mozilla.org page under "Customizing Firefox", to this article: [[How do I customize the toolbars?]] in case it helps you or anyone else finding this topic. It has a section on adding a new toolbar to Firefox.
I can't help you on creating your own button, textfield and a combo box for the new toolbar but I see you (Dinesh) asked this question on Jan 5, here:
http://groups.google.com/group/mozilla-labs-jetpack/browse_thread/thread/0d877e5afcbfe745# ''how to create a toolbar using add on sdk''

How to create a new UoM and assigning it to characteristic?

Hi,
How to create a new UoM and assigning it to characteristic?
i want to enter cost ( in rupees and laks) against a counter
but for that counter charecteristic required and for taht charecteristic unit of measure Rs and Laks are not defined in the system.
So please help me ....

Hi,
Use T Code CUNI
Enter Unit of Measurement as RS and Text as Ruppes
Commercial and Technical Display is same as RS
Numerator is 1
Denominator 1
Exponent 0
Save
Thanks
Raj

How to create a new 'id and type rect' in _edge.js from your stage in javascript

how to create a new 'id and type rect' in _edge.js from your stage in javaScript

_edge.js is an object file their is any way to create ?
if i run this script "alert(Stage);" in creationComplete
i will get
i have little idea on object example
var obj = {car: "honda city"};
obj.bikes = {model: "suzuki"};
alert(obj.bikes.model);
Anyway thank u vivekuma for ur kind reply!

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

Fact table contains how many no. of Dim. ids and Key figures?

Fact table contains how many no. of Dim. ids and Key figures?

Max 233 KeyFigures,Max of (16dimensions*)248 DIM Ids?
dim table doesnt contain Charateristics,but Primaray keys of DIM Ids + SIDs where as Fact table contain corresponding Foreign Keys and keyFiures
Message was edited by: Murali

How to create a new workspace and change the name of the existing

Hi,
can any one help me how to create a new workspace in application express 3.1 on XE DB and how to change the name of a existing workspace.
thanks
Jana

Jana,
This is discussed at length in the User's Guide. See the section "Creating Workspaces".
To rename a workspace using the admin application, edit the workspace attributes and type a new name in the field where the old name appears, then Apply Changes.
Scott

How to create a new account and copy all settings?

I think my main user account is corrupted. So I want to create a new account and copy all of my settings, files etc..and more than likely piecemeal just incase my settings are what is corrupted. That way I can isolate the problem.
I don't plan to delete the main account until satisfied and I also have my Time Machine backup plus my SuperDuper backup.
I can/should be able to figure out how to create the new account, but I am very unclear on the best/easiest approach to copy in my iTunes files and settings, applications(is this even an issue), address book, email, etc? I should be able to find most everything underneath my home account folders but what else am I missing here? I don't want to find out the hard way.
Please share some advice or perhaps a link/FAQ on how to approach.
Thanks in advance.
--Mickey

use this [link|http://discussions.apple.com/message.jspa?messageID=6185507].

How to create a new node and its subnodes(zreports) in Transaction SRET

Hi Expets,
My requirement is to create a new node and subnodes(zreports) in the Transaction SRET.
Where as i am able to create a subnode(zreports) under the existing node but not able to create a New Node and
Subnodes(zreports) under it.
To create the subnodes(zreports) i used Transaction SERP and i was able to create the new node in SERP but not able to find it in SRET.
So please help me out.
Thanks,
Krishna

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new user and group on command line?

Hi,
I am trying to install INN, the news server on OS X.4.8 (non-server), but it requires me to create a user and group, both called 'news'.
I know this has something to do with using Netinfo to create them, but I am logged in remotely via ssh and I can't use Netinfo Manager.
How do I create new users and groups via the command line.
Thanks for any help.
PowerMac G5 2x2.7GHz Mac OS X (10.4.8)

I've put some shell scripts that do this here,
and descriptions
add_user
addgroup

How to create a new master and working repository

We have a working env - with master and working repositories .
we have solution for this env .
I want ti create a new environment for a new version - and to create new master and working repository from the old environment .
I tried several options but with no success .
Please help me to understand how can this be done ?
Thanks
Tamar

What options have you tried with no success ?
Do you want to selectively release / migrate code from one env to the new one or will a clone of the working environment be sufficient? If you clone - you wont be able to selectively move updates across.

How to create a new database and use it?

Hi there,
I have so many tables in the current database that i'm working on. When i start to create a new table such as employee, student, person...etc it doesnt allow me to create them becuase it says the tables exists. Even when i use the drop command to drop the tables, doesn't help. So most of the time i have to create a table with postfix of 1, 2 to the table name.
Therefore i need to create a database for every project that i do.
How do i create a new database?
Then how do i use the database that i just created?
Then how do i find the out whats the database that i'm currently working on?
Thanks!
Message was edited by:
dingdong
Message was edited by:
dingdong

A database is a physical set of files that contains many schemas. Each schema has a one to one relationship with database users, so to create a new schema you create a new database user.
e.g.
CREATE USER fred IDENTIFIED BY fredspassword;Then, by logging on as fred you can create all the new tables you like as that user, in that users schema.
If you create a new database then you will find you cannot access functions/procedures, packages, tables etc. that exist in another users schema without creating a database link to the other database that contains them.
If you just create a new schema, you can more easily get at other users schema objects (tables, packages etc.) by referencing them with the users name e.g. JOE.TABLE1 providing that user has given permission for your user to access them. You can also create synonyms that allow you to reference other users schema objects as if they exist in your own e.g. you can have something called TABLE1 in your own schema that is in fact referencing JOE.TABLE1.
Message was edited by:
BluShadow
remove quotes from password. oops! thanks padders

How to create selection variable on a Key Figure

Dear Experts,
I have a key figure 'No of Days' in the BEx Query. I need a selection variable which when the users provide the input, should give me the report output where the rows shows only those whose No of days are less or equal to the input value.
I am able to create such a selection out of a Characteristics field but I am unable to create one from a key figure.
Kindly note that we are not using the BW Portal. We are running this report in the webi from a Universe created from the BE Query.I know that it is possible to ceate such a scenario in Webi, but we want the selection coming from the BEx Query for better report performance.
Thanks,
Sai

Hi Experts,
Thanks for the suggestions. I cannot use the 'Condition' since this BEx query is being called from a Webi report. MDX will not recogonize the condition.
I was able to create a Variable and use it in the calculated key figurare. The problem is , I am getting 1 where the condition is met and 0 when the condition is not met. But I want to see only the results where the condition is met. How to to avoid the rows where the result is not met.
Am I getting this because there are actually 3 other key figures along in the query in addition to the key figuare ' No of days'.
Should I add some condition to the other key figuares also.
Kindly confirm and help.
Thanks,
Sai

Error When creating a new Global Calculated Key Figure or RKF

Hi,
Coming across this problem with NW2004s BI 7 query designer. When i create a new CKF or RKF with the query designer, i get a error message.
Currently the SAP GUI is on SP 8 and the problem exists after applying the collective note recently released.
Rgds
Dinesh
Message was edited by: Dinesh Mukundu

Also, make sure you've got all your frontend patches configured correctly as outlined here:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

How to create a new Characteristic and Key figure ?

Similar Messages

Maybe you are looking for