How to create a new client in SAP?

Hi Experts,
In my SAP system client 800 is already exists.And I want to practice ALE I need another client.So can exactly tell me steps to create new client?

You can create a new local client by copying exsisting client through SCCL
Please go through the required client copy documentation if you are on project
and also refer to required SAP OSS Notes
Few relate T.Codes are:
SCC1 Client Copy - Special Selections
SCC3 Client Copy Log
SCC4 Client Administration
SCC5 Delete Client
SCC7 Post-Client Import Methods
SCC8 Client Export
SCC9 Remote Client Copy
SCCL Local Client Copy
Reward Points if uesful.

Similar Messages

How to create a new package in sap

hi,
I want to create a package in sap for a new module that i am creating and all reports created under it should be transported only by transporting the package. Please guide me with this as i do not want to change the properties and attributes once its done.
Thanks in advance.

Hi,
here we go:
SE03 - Transport Organizer tools - Include objects in a transport request -
regards Andreas

How to create new client in SAP IDES

Hi Experts,
          I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
          For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
          Give me some suggestions on this.
Thanks & Regards,
Ravi.

You Need to do something like this .
Logon to the system
start Transaction SM31
Enter 'T000' as the table name
create a new entry with your preferred client number
logg off the system
Start a new gui logging on to the new client with user
'SAP*' and password 'pass'
Start transaction 'SCCL'
Use client 000 as source and your new client as target
give it the 'go'
wait some time
You can also do all these steps through the menu:
Tools
Administration
Administration
Client Administration
Client Copy
Local Copy
Hope this helps...
Abhinab Mishra

Problem Creating New Client in SAP NW2004s ABAP+JAVA LINUX

Hi,
I installed successfully NW2004s dual stack on linux vmware (SUSE10 enterprise server). This stack give me two client by default, 000 and 001. System gives me default user sap* and password: sapn4sadm
I want to implement the process for BW enabling, and I want to create New Client for it. I have been used SCC4 to create a new client by logging on with the Client 000, but the problem start, when I log-on with the new client.
Client: 002
User: sap*
Password: pass
I have tried system default password of sap* , but that also dosen't help.
It doesn't work, I also try RZ10 to change the value of login/no_automatic_user_sapstar = 0, but I don't find any profile , when I click on the profile field, i get the message "Profile not found". I am not figuring out where I am doing wrong.
How can I success to create a new Client in which i could log on with sap* user. Please Help me
All yours help would be highly rewarded.
Obaid.

In order to edit profiles In RZ10, you must first import them.
Menu: Utilities --> Import Profiles --> Of Active Servers
After this you can add your parameter.
One alternative is to edit the profile directly with vi, restart the system, do all client copy tasks, remove the parameter with vi, restart the system again and then import the active profiles.
the profiles are located in directory
/usr/sap/<SID>/SYS/profile
and the filename is something like this
<SID>_DVEBMGS<instancenr>_<hostname>

How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .

Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

How to Create the new Field ( Table - Row) in SAP B1

I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase Document. that filed is not available in form setting. kindly let me know how to Create a new field in Purchase document.
Thanks

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

I need a procedure for creating a new user in SAP NW(BPC)

Hi,
I am doing Migration project from SAP BPC MS to NW.
I don't know how to create a new user in NW.
Could you please provide a document to create or add a new user in NW.
Thanks and Regards
Krishna

Hi Krishna,
If user authentication method is AD, all AD users can be added into BPC for the required access, The task 'Define Security' covers who can add users, create or modify task and member profiles.
The guide is a good place to start understanding it.
If you already have a list of users and would want to mass manage the users into your new system, you could also use the program: ZUJE_MASS_USER_MGMT (to import users, teams, profiles into the target system).
Note: Users and Teams are not included in the transport. So you need to manage them outside either by using the program that I mentioned above or add them individually using admin client.
Thanks,
Sreeni

Creating a new client

Hi guru
How create a new client similar to client000.
Points will be rewarded for the responses.
Thanks in advance
Vijay.

Hi,
pl check this
[New client|http://www.sap-img.com/bc049.htm]
[To create new client|http://listserv.sap.com/pipermail/linux.general/2002-April/002281.html]
regards
sadhu kishore

How to install a new client in IDES 4.7

Hello All,
I installed IDES 4.7E in my PC, can you please advise how i can install one more client to the SAPGUI logon.
Thanks for all your comments.
Sharan.

Hi Sharan,
your question is nt clear.
1. if you need another client like 800,810,811.
for ex you need 100. for that logon in any of the above clients and goto scc4 and create a new client and then logon using 100 username sap* password pass and goto sccl and copy from 800 to 100.
2. if u want to add your server in saplogon you have to go for new in logon and then add the server details.
let me know if not clear.
reward points if helpful.
Regards
Muthappan

How To Create The New VO in Standered Page?

Hi Gurus,
Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
Regards,
Srini

Hi Sara,
1. Could you please tell me how to create the new webservice in XI?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
2. What tools we have to use to create it.?
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
Altova is also a good option
3. How to send the SOAP request to XI?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
SAP Note 856597
An Add-on
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards,
Prateek

How to create a new repository in EP 6

I was wondering how to create a new repository in EP 6 SP2 CM. I am farmiliar with using repository managers, but I just want to create a new repository similar to the dfaul repositories that are provided by sap, such as "discussions or documents". The reason is that I want to be able to report "only on the size of this repository"
Thanks
Jeremy

Jeremy -
You can create a CM repository using the following path:
System Administration -> System Configuration -> Knowledge Management -> Configuration -> Content Management -> Repository Managers -> CM Repository
Click on the New button.
Enjoy!
Kyle

How to create a new session in JSP file

Usually a child IE window uses same session with parent window. Dose someone know how to create a new session when creating a new IE window by clicking a URL in parent window? The web page is writen by jsp file.

I am not sure of your question. Are you wanting to have 2 Session objects (one for the parent window and another for the child)?
A session is usually created once per client and is stored on the server the session id is carried around in a cookie or a URL rewrite so that everytime the user submits a page you will be able to store/access information.
// this will create a new session object if one doesn't already exist.
HttpServletRequest.getSession( true );
Hope this helps

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to create a new value for template classification??

I want to classify a workflow template, I mean I will not classify my template as a general task. Using TA PFTC_CHG I get a list with all the entries that a customized in my system. My question is how to create a new entry in that list? System is 46C.
thanks in advance for any hints
Jochen Winler

Hi Jochen,
Follow the customiztion path:
SAP Web Application server->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes
(For 4.6c the path is:
Basis Components->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes)
By this you can maintain task class entry as you required.
Hope this helps.
Pls. close the thread once your problem is solved.
Regds,
Akshay Bhagwat
Note: Pls. reward with points if it helps:)
Message was edited by: Akshay Bhagwat
Message was edited by: Akshay Bhagwat

How to create a new client in SAP?

Similar Messages

Maybe you are looking for