How to create a new Country-Key and Region

Dear Sir,
We are creating a new Customer Master record using Tcode XD01 , the customer belong to a Country "MOZAMBIQUE" . This country doest not exist , so we have to create a new Country , Country-Key and Region for this .
Pl guide us , as what steps are required to be followed for this .
We assure to award full points for the suggested solution pl
Rgds
B Mittal

Hello,
You can define new country code at general settings in SPRO.
SPRO --> IMG -> General Settings -> Set Countries -> Define Countries . Transaction code OY01.
Prase

Similar Messages

  • Creating a new country key in bnka

    how to create a new country key in bnka.

    Hi,
    T-code XK02 u can create the Bank data for vendor. If u created thsoe details Stored in BNKA table.
    Rewad if useful...
    Thanks,
    Durai.V

  • How to ceate a new Country key,currency ,version and value type for report

    hi,
    can you please let me know How to ceate a new Country key,currency ,version and value type for report
    along with tables and tcodes.
    thanking you

    Not clear on your comments
    How to ceate a new Country key,currency,
       version and value type for report
    because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
    Can you let us know you want to develop a report and if so, from which transactions, you want to take datas.  You have to be clear on this.
    thanks
    G. Lakshmipathi

  • How  To create a new word document and to serve bookmarks

    how To create a new word document and to serve bookmarks

    there is an example :
    http://www.must.de/default.html?Javactpe.htm
    howerver ,I don't kown how to use in jsp!!

  • Country key and region change

    Can any tell that how i can change country key and region of plant after some material master data is maintained? In spro sap is not allowing to change the country key and region of the plant.fields are in display only

    Dear,
    Go to OX10 transaction and select your plant - select details - once plant details displayed, click on address icon on (Shift+F5). Here you change the country in address.
    But consider different impacts of country change - like tax calculations, Sales etc.
    Regards,.
    Syed Hussain.

  • How to Create a New Admin Account and Change Original to Standard Account?

    I have a single user admin account that I set up when I got my PowerBook. Now I want to have two accounts with the new one being the admin account. This way I can leave most of the data files, email accounts, etc. with the old account and use the new one for personal data and admininistration. Then I could give out the password for the original account without fear that a user could change permissions and get access to the new account with the personal data. Can I create a new admin account and then change the original account to "Standard" instead of "admin"? What problems will this create?
    PowerBook G4   Mac OS X (10.3.9)  

    i2:
    Not sure if you are asking if or how. Templeton has
    answered if. Here's how.
    Apple Menu > System Prefs > Accounts. Click on the +
    under User Options to create new account. Go to
    Security and check box at bottom to make account
    admin. You can take care of the other items, picture
    etc, login options etc.
    To make the other account Standard select the
    account, go to Security and deselect box "Allow User
    to Administer".
    Hope this answers your questions.
    Good luck.
    cornelius
    PismoG4 550,
    100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS
    (10.4.4)   Mac OS X (10.3.9)   Beige G3 OS
    8.6
    Thanks, I'm tying to find out if I will run into problems, such as not being able to use the new admin account to change permissions in the old.

  • How to create a new security group and assignments of rigths?

    Hi,
    In our current "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, we are a couple of administrators using the same user account to logon to the "https://10.10.x.x/ccmadmin/showHome.do" homepage.
    Where can I create a new user group and assign the appropriate rights to the group, and add users to the group? Or is it another approach that I need to follow instead of the way that security rights a made in a Microsoft Active Directory?
    Is there any place that I can read or view examples on how the setup can be done? I would like to have it in the way that everyone has their personal user account and use this to logon the administration-web page instead of an account that everyone uses.
    Kind regards,
    Carl-Marius

    why do you need to create a new business group? To implement HR? If so, linking a HR responsibility to your user, is one of the few steps to go anyway.
    How you did it on the test environment?
    Why not link a hr resp to your user temporarily, and disable it later.
    I'm always afraid to answer this kind of questions, since the real requirement is not described.

  • How to create a new cell attribute and add adorner to the cell

    Hi
    I am relatively new to InDesign and wanted to do the following
    I want to add a new boolean attribute to a selected table cell. When this attribute is set, I would want to draw one line vertical and one line across the selected cell ( kind of like a "Plus" sign over the cell). I am wondering how to go about doing this.
    PS: I read the snippet snpManipulateTableStyle and can see how to change a cell style using existing attribute (kcellAttrFillColorBoss). However in my case, i want to create a entirely new boolean attribute and based on it being true or false, I would want to draw the adornment on the cell
    Any help with this would be greatly appreciated..
    thanks!
    Sam

    I would create the new site first, then promote the new domain controllers and add them to the site. You can do this during the dc promote process.
    There's step by step guides already available for creating a site so I don't see any point reinventing one.
    Here's one:
    http://www.petri.co.il/create-active-directory-sites-windows-server.htm
    You may have to adjust the site links part since it looks like Site 3 will only be linked to Site 1.
    Of course, the IP addresses for the domain controllers in Site 3 have to be in the IP subnet configured for that site.
    Using the example above, you'll of course have to enter the information that makes sense for your netwrok.
    I doubt anyone will create a custom step by step for you using the information you provided  (they'd also have to know your subnets for one thing) but then, who knows. 
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • How to create a new company code and how to assign it to billing units?

    i am working on roll out project.....please help me in creating a new company code....

    Hi,
    You have raised this query in wrong Forum. Please raise ur query in the relevant forum.
    rgrds,
    Randhir Soni

  • How can I remove one device without having to create a new sync key?

    I had to hand in a laptop at work but forgot to de-register the device. Is there anyway I can remove this one device from my sync account without having to create a new sync key and add all of my machines back?

    That changes the password but it keeps the same sync'd machines active. That laptop probably has not been turned on in weeks but it still shows up on Firefox Home even though I changed the password on the machines that I still have (the old laptop still has the old password but it still shows up as do the machines that I have not changed the password on yet.) I'm not trying to prevent that machine that I no longer have to sync with my data - I erased it - I just want it to be removed from Firefox Home on my iPhone.

  • How to create a new classification at element level

    Hi,
    Can you please help me out in how to create a new element classification and I want to enable DFF at element entry screen only for this classifcation elements.
    Thanks
    Anil Lakkoju

    Hi friend,
    you can create the user on Administration Tool, on Manage ->Security -> Users -> right click and then new user.
    Now, connect to presentation service as administrator. Then, on Settings -> Administration -> Manage Catalog... here you can create new folder and grant access to folder users what you want.
    regards.
    Edited by: Hammett81 on Aug 2, 2010 5:54 PM

  • How to create a new lookand feel?

    How to create a new lookand feel and How it works?
    Can anyone help me with some tutorial?
    Thanks a lot!

    Hi,
    I recommend subclassing javax.swing.plaf.basic.BasicLookAndFeel and adjusting the desired values. For more information see the sources of BasicLookAndFeel and MetalLookAndFeel.
    Regards,
    Michael

  • How to create a new Characteristic and  Key figure ?

    Hi !
    I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

    Hi,
    Instead of RSA1, use RSD1 to create Characteristics & Key figure.
    1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
    2. Enter name of the same & click on create transaction.
    3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
    4. always copy new key fig. or characteristics from standard.
    5. after creation activate the key figure.
    Hope this steps will help you to create Char. & key fig.
    Regards
    Sujay

  • How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    Hey -
    I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
    My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
    He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

  • How to create a new wage type in IT0014 and assign the GL?

    Dear Gurus
    Please guide me about Creating of new wage Type in 14.
    My client wants to add a new wage type says:-1HRR ( Honorarium)  &  assign  the same to  Training Expenses GL account and order number. How to do it. Please guide.
    Regards
    Vikas K Sharma

    To copy a standard WT and assign a new name with the same attributes and characterstics:
    IMG > Personnel Management> Personnel Administration> Payroll data> Recurring Payments and Deductions. Copy any standard Wage Type.
    Check assignment of WT to a Symbolic Account :
    (The WT will inherit the Symbolic account from the copeid standard WT)
    Go through SM30 to Table V_T52EL_NOFM. Make neccessary changes to the Symbolic account, if needed.
    To create a new Symbolic Account and assign it to the WT:
    Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Employee grouping and symbolic accounts --> Define symbolic accounts
    To assign the WT to the new symbolic account (same as table V_T52EL_NOFM):
    Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Wage Type Maintenance --> Define WT posting attributes
    To assign a symbolic account to a G/L or Check the assignment of Sym Acc to G/L:
    Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the AC-System -->Account Assignment --> Assign expense accounts.
    Hope this helps.
    Soujanya.

Maybe you are looking for