How to create a new "key combination"

Hi, gurus,
I need I now key combination like "sales organiztion/distribution channel/sales office" in a conditon type. How can I set in IMG? Thanks advance.

hi
Use t-code V/03
In addtition to above reply, first check which is the last table no used. You should use table no from 501 to 999
before creating new table you can check the avilable tables.
Regards

Similar Messages

Steps to assign new key combination to existing output type

Hi,
Can anyone share details about how to create a new key combination for existing output type.
Regards,
Dharmesh

Dear Dharmesh,
Go to:
IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Sales Activities - Maintain Condition Tables -
Maintain output condition table for sales activities
Click on 'Condition" from the Menu Bar. Then select "Create" from drop down menu.
Give a Table Number & press Enter.
Here select the required Feild from Feild Catalogue & Click on Generate.
Then goto:
IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Sales Activities - Maintain Access Sequences
Here Click on the required Access Sequence & then click on "Accesses' on the right side. Here you can assign the newly created Condition Table at required level (10, 20, 30 etc)...
Sebsequently try maintaing condition record & you will see the new Key Combination appearing.
Hope this helps.. .
Thanks,
Jignesh Mehta

How to create a new Characteristic and Key figure ?

Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay

How to Create a new Project by Combining 2 already existing Projects

How to Create a new Project by Combining 2 already existing Projects

CCopy the contents of one and paste it into the other. Or duplicate the first project and then paste the contents of the second.

How to create a new folder within the video folder in media

Hi, I'm trying to figure out how to create a new folder within the video folder in media. I can easily create new folders within the pictures folder but not in videos.....Why??? Thanks in advance for your help.
Message Edited by dany_s on 06-25-2009 03:58 PM
Solved!
Go to Solution.

Hello,
I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
Soft reboot :
1) Hit the three following keys at the same time :
- Alt
- Right Shift
- Delete
2) wait 2 minutes for the Blackberry to wake up.
Hard reboot :
1) your Blackberry device is on
2) remove the battery and wait for a minute
3) Put the battery back
4) wait 5 minutes for the device to wake up.
Please tell us if it works for you.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to create a new Business Unit

Hello,
I have problem.
Can anyone tell me
1 : How to create a new Business Unit, New Company from Jd Edwards screen means webpage.
2 : Can i find the User Defined Codes means UDC in jd edwards screen.
Thanks,
Shakti Prasad Priyakumar.

First, let me confirm that you are on JDE World, and not JDE Enterprise One/One World. They are very different environments. JDE World is normally a green screen, IBM Client Access based system.
If you are on a JDE World menu and you have the proper security access, just type in UDC on the command line and hit <ENTER>. You hopefully are in a test environment when you do this, since it sounds like you have very little knowledge of JDE. The UDC screen will come up. If you know the system code and code of the UDC table you want to look at, you can key them in and bring up that table. Otherwise, do F5. That will let you search by system code and see what table codes are available in each system. If you are not sure what UDC table you need, you can look at the JDE data dictionary for the data item you are interested in and that will tell you the UDC table, if the data item is UDC based.
As for setting up new business units and company, get to the main general ledger menu. Don't remember the exact path, but you want to get into the setup/define menu for general ledger accounts. There will be separate options there for maintaining companies and for maintaining business units. You want to play with this in a test environment before you do anything for real.
Hope this helps a bit.
John Dickey

How to create a unique key using two or more attributes?

how to create a unique key using two or more attributes ?

The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”.

How to Create a Restricted Key Figure in BO Webi Report

Hi Experts,
Please tell me How to Create a Restricted Key Figure in BO Webi Report.
Thanks in Advance.
Regards,
Rafi

Hi,
1. Define a new measure in the designer.
2. In the select clause give the reference to the key figure on which restriction to be applied.
For example
@Select(Key Figures\Number of Records)
3. In the where clause, give the MDX expression for the filter to be applied.
For example
<FILTER KEY="[0PURCH_ORG].[LEVEL01]">
<CONDITION OPERATORCONDITION="InList">
<CONSTANT CAPTION="HAS"/>
</CONDITION>
</FILTER>
Regards

How Do I Customize the Key Combination to Cycle Through Windows in Reverse in all Applications?

How do I customize the key combination to cycle through windows in reverse in all applications? I want to be able to change the global setting for Command+~ (Cmd+Shft+`) to something more desireable. I could NOT find a way to do this in Systems Preference -> Keyboard -> Keyboard Shortcuts since there is not a menu selection "Cycle Through Windows in Reverse". I then went and looked in the plists DBs of Finders resources hoping to find a setting I could override. I was quite supprised, as well as some of the MAC gurus in the office, that there was not an easier way to override cycling through windows in reverse on a MacBook - the most user friendly and accessibility aware computer on the market:)
Here is my MAC software info.
System Version: Mac OS X 10.6.7 (10J869)
Kernel Version: Darwin 10.7.0

I don't know of any way to have a separate commandkey combo for the reverse cycle function.
From the Help pages for OS X 10.6.7 ("Using global keyboard shortcuts") -
NOTE: You can create keyboard shortcuts only for exisiting menu commands.
Since the 'reverse' cycle command is not an existing menu item, creating a separate key combo for it doesn't seem possible. Apparently the 'reverse' cycle command is a fixed one, internally defined as a mod of the normal cycle command invoked by adding Shift to its key combo.
There may be a way to achieve what you want via a two-step process: write an AppleScript that will invoke the 'reverse' key-combo set, then link the activation of the AppleScript to a key combo of your choosing. Not sure if this is even possible, though - usually AppleScript activation via keyboard would be set up via an FKey.
I can understand wanting to share the RSI risk evenly between both hands, or even to unload the left hand if that is desirable. However, apparently a two-key combo can't be done for the reverse cycle function. Is a three-key combo not possible? ...meaning a two-key combo on the right (Command plus something) for normal cycling, adding Shift for reversing?
One caution about changing keyboard command combos - it's very easy to accidentally set up a conflict with a another existing commandkey set. FWIW, most, if not all, of the mnemonic and easily-reached letters are already used. In this vein, the Keyboard Shortcuts page of the Keyboard prefs pane shows such conflicts via a yellow caution triangle next to the conflictors.

New key combination for access sequence

hi,
i have an active access sequence called ZBMP. There is 2 key combinations to the access sequence
5 materail / plant
10 material
I need to add a new key combination
15 - material / Pant / Distribution Channel
to the access sequence.
Can someone please help.
Regards

Hi,
Step 1: Go to V/03 and create a table with key fields(material / Pant / Distribution Channel) or Use the existing standard table.
Note the created table number.
Step 2: Go to V/07 and select your previous Access Sequence and Double click on the Access field under Dialogue structure. click new entries and specify the new table number with step number (Created in step:1).
Step 3: Now select the Line item and double click on Fields. Ignore the warning by pressing Enter Key.
Now do save.
Step 4: Check your Access sequence. New table would be added.
Hope it helps.
Regards,
A.Govin

How to create a new partition

i just got a new thinkpa. i would like to know how to create a new partition.
i tried partition magic 8.0 and it gave me BSoDs. please let me know. thanks.
thinkpad t400 t9400
2gb ram
windows sp3
160gb 7200 rpm

folivio wrote:
I'm not an expert, but I partitioned the C: drive and made a partition for Windows 8. It worked perfectly as a multi-boot setup.
A word of caution...Make sure that you want to make it a permanent change. When I removed the Win 8 partition and tried to restore my system to factory settings, I could not get the F2 during restart to work. F2 now brings up the multi-boot screen. So I tried to restore using the DVD Restore Set I made before I did anything to the partitions. I was able to boot to the DVD Restore Set by using the F12 key during restart and selecting the BDDVD drive. It looked like it was going to work, but after it loaded the minmum Windows files and I clicked on Restore, I got an error stating that the partition had changed and I could not restore.
I contacted tech support and they are sending me a disc to restore the system.
Regards
Thanks for the heads up. I'd like to use the SSD for installing Windows 8. It seems to have about 25GB free. Isn't that a better place to install the OS? I am not sure why the bigger drive is marked as C: and the small, faster one as D: :-(

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How To Create The New VO in Standered Page?

Hi Gurus,
Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
Regards,
Srini

Hi Sara,
1. Could you please tell me how to create the new webservice in XI?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
2. What tools we have to use to create it.?
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
Altova is also a good option
3. How to send the SOAP request to XI?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
SAP Note 856597
An Add-on
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards,
Prateek

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create a block key default for documents created by MIRO?

Hi All,
How to create a block key (BSEG-ZLSPR) default for documents created by MIRO?
Could anyone tell me?
Thanks
Gandalf

HI,
The payment block--BSEG-ZLSPR can be made defaulted by two ways.
Means you want to fix one value all the times for the same ,you have to do the same in Vendor master
ie in the Vendor Master in the Payment Transactions Selection screen. make the Payment Block you want to be defaulted in MIRO.
you can do for all vendor master in mass change -- XK99.(LFB1)
if you are not OK with the Above .then there is another way to do the same
it is by Screen layout setting in SHD0
in this enter the Transaction MIRO and create a Transaction variant Z*** and click on create
and also create a Screen variant in OMLRLIST
T code MIRO
Screen variant name Z**
Program-SAPLFDCB
Screen Number 0020
and create it .
in creating ---enter the default value in the Payment block and in the varinat just check the box w.content
KNow in SHd0 add this screen variant for the above Trasaction variant
and then activate this trasaction variant by going into the tab Standard variants.
so that when ever you do miro this variant will be called and you can get this payment block defaulted.
hope so it helps
Regards
Anjanna

How to create a new "key combination"

Similar Messages

Maybe you are looking for