How to Create a new RODC in an existing domain

Hello everyone,
Is anybody could help me with DCPROMO install on RODC 2008 R2 ? I wanna join to an Existing forest. "Create a new RODC in an existing domain". If you could write me step by step cmd would be nice.
Thank's

by cmd you mean from command promt?
If, use something like this:
dcpromo /unattend:c:\ua.txt
The file should contain at least this info:
[DCInstall]
ReplicaOrNewDomain=ReadOnlyReplica
ReplicaDomainDNSName=my.domain.com
SiteName=yoursite
InstallDNS=Yes
ConfirmGc=Yes
CreateDNSDelegation=yes
UserDomain=my.domain.com
UserName=user
Password=P"ssword
SafeModeAdminPassword=P"ssword123
CriticalReplicationOnly=Yes
RebootOnCompletion=Yes
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Similar Messages

How to create a new tab inside a existing subtab on a page.

Hi,
How can I create a new tab inside a existing subtab on a page?
If I change directly on the page.xml it will not maintain compatibility with upgrades. Am I right?
Thanks,
Marcelo

Marcelo,
Well basically you are adding a stackLayout bean and using that adding your region. Are you able to see the changes and run the page without any error?
As you are manipulating the file manually, you can never be sure of whether its going to cause issues later on or not. And as mentioned earlier if OAF doesn't support creating the subtab using personalization, there are bound to be some limitations from the framework side. Also what personalization allows is to create items and not regions. So better stick to a rigorous testing to catch any issues early on.
--Shiv

How to create a new full backup alongside existing one?

I have recently reinstalled my MBP from scratch and installed some apps from scratch as well. I still have my old TM backup in a sparsebundle on my NAS (a ReadyNAS NV+).
I now would like to create a complete new full backup alongside my existing one. Or put differently, a new folder/backup inside the Backups.backupdb inside the mounted sparsebundle. Currently I see a folder called "XYZs MacBook Pro". I'd like that to be renamed to something like "XYZs Old MacBook Pro" and create a new full backup under "XYZs MacBook Pro".
I understand you end up having multiple folders inside Backups.backupdb if you have many Macs (with different MAC addresses). I only have one Mac, but want TM to treat my old previous backup (of the same MPB, hence with the same MAC address) as if it was from another Mac (with a different name).
With such a setup, I can still access backups from my previous installation of the same hardware by selecting another volume from TM (by holding Alt when clikcing at the TM icon) or with tools such as Back-In-Time.
Is there any way to achieve this? My sparsebundle is large enough to hold another full backup alongside the old one.
Thanks
- Tom

Pondini wrote:
tofe1965 wrote:
But wait, you said if I erased the disk I get a new UUID. I did not erase it but I moved all files into a /Previous folder (after booting from the install DVD), then installed the system new, and then moved user data (and some Library and some application stuff) back from /Previous. So, I guess, I have no new UUID for my internal disk.
Ah, yes, that is different ("reinstalled from scratch" usually means erased). If the disk was never erased, it will still have the same UUID. But since you've moved or replaced virtually everything, it will all get backed up anyway.
I'm not sure why you did all that; the old +Erase and Install+ and +Archive and Install+ options no longer exist for Snow Leopard: there's just Install, which replaces OSX without touching anything else.
I wanted to have a *really clean* install as my old systems seemed to be messed up with some bad settings.
So, back to my original question: how can I make the new "XYZs MacBook Pro" appear alongside the old "XYZs MacBook Pro" and switch volumes when I start TM using the Option key?
Why would you want to do that? You can view and restore from any backup.
I figured that way I can keep all old backups from the old installation and not have TM retire old stuff. And start a new one from scratch for the new installation where things will get retired. Basically keep the two backups apart from each other and not see any of the old stuff unless explicitly mounted using the option key.
If I follow your approach, what happens to old files of the old disk/UUID? Will they get retired eventually? Would my original idea work as envisioned or would it retire old things nevertheless? If the latter is the case, it is of no use and your suggested approach is the better one.
Is there maybe a ay to force TM to start a new full backup?
Back up to a different place: a different HD or partition, or erase the current one.
Guess that's my only option then. I created a full bootable backup to en external USB disk using Carbon Copy Cloner. Erasing the internal disk and copying back using CCC will create a new UUID then I guess ...
I will try that in the next couple of days and report back here. Thanks a lot for all your help and explanations so far, much appreciated!

How to create a new iMovie library from existing events?

I have had the misfortune of loosing my Mac with all of the data on it BUT fortunately I have kept a copy of all my iMovie events backed up so I've managed to save them.
Now I have a new iMac and 500Gb+ in the "iMovie Events" folder. I've copied this folder into my Movies folder (in "home" dir) BUT since I didn't also back up the .imovielibrary file I need to create a new library for all these events. The problem I'm facing at the moment is that I'm not sure how to "import" these events in a way that will maintain all/most of the information. I've tried doing the File > Import Media and pointing it to the Movies folder BUT it looked like it was going to import all the files into a single Event, so I chickened out.
Any suggestions/recommendations? Am I doomed to importing the events one at a time?
Thanks!

Looks like I may have found a solution.
As mentioned above I've copied the "iMovie Events" folder to the place iMovie expects it to be at. And now I've selected: File > Update Projects and Events
It has recognized that there were a bunch of events that it needed to "process" and has started reading them all.
It looks like all the events are back, I've not done extensive checking yet, but so far it looks very promising.

How to create a new folder in the existing role

hi,
i need to save the workbook trial balance under the folder trail balance currently the workbook is under BW Reporting folder ,but for that i need to create a Trial Balance folder and move the trial balance workbook to that particular folder
could anyone of you help me.
Thx
apparao

Hi,
You have to:
-Tx(PFCG)
-Select the role that you want to create a folder
-Go to "Folder Tabsheet"
-Create your folder
-Save
-Open your workbook
-Save the Workbook into this role in the corresponding folder.
Regard, hope it helps
Assign point if useful please.

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How To Create The New VO in Standered Page?

Hi Gurus,
Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
Regards,
Srini

Hi Sara,
1. Could you please tell me how to create the new webservice in XI?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
2. What tools we have to use to create it.?
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
Altova is also a good option
3. How to send the SOAP request to XI?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
SAP Note 856597
An Add-on
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards,
Prateek

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create a new facebook account in iphoto?

How to create a new facebook account in iphoto?

Instructions can be found by selecting iPhoto Help from the Help menu within iPhoto.

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new workspace and change the name of the existing

Hi,
can any one help me how to create a new workspace in application express 3.1 on XE DB and how to change the name of a existing workspace.
thanks
Jana

Jana,
This is discussed at length in the User's Guide. See the section "Creating Workspaces".
To rename a workspace using the admin application, edit the workspace attributes and type a new name in the field where the old name appears, then Apply Changes.
Scott

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create a new repository in EP 6

I was wondering how to create a new repository in EP 6 SP2 CM. I am farmiliar with using repository managers, but I just want to create a new repository similar to the dfaul repositories that are provided by sap, such as "discussions or documents". The reason is that I want to be able to report "only on the size of this repository"
Thanks
Jeremy

Jeremy -
You can create a CM repository using the following path:
System Administration -> System Configuration -> Knowledge Management -> Configuration -> Content Management -> Repository Managers -> CM Repository
Click on the New button.
Enjoy!
Kyle

How to create a new place in iPhoto 11 without doing any harm?

Yes, I know how to create a new place for a photo -- theoretically:
Select the photo.
Make sure the Info icon in the lower right portion of the iPhoto window is clicked and the too-tiny-for-any-but-the-youngest-eyes map is displaying.
Click in "Assign a Place..." and begin typing a place that iPhoto will search for. It searches in both "your places" (i.e., those that you have already defined) as well as in Google Maps.
When you see a place in the search results list that you think might be close to the one you mean, select it.
A pin appears on the itsy-bitsy map. Move it to the exact place you mean. You can make controls appear on the map by moving the mouse over the bottom of the map. The controls allow you to zoom in and out, and to change views (Terrain, Satellite, Hybrid). When the pin is where you want it, click it. The current name of the location appears. Modify it to the name you want, then click the check mark.
That's "all" there is to it ... except for a couple of "gotchas."
There's a difference between what happens when you select a place that you've defined and when you select a place that Google found in the search results. If it's a place that you've defined, and you then move the pin to a new location and/or change its name, this will affect all photos assigned to the custom place. In effect, you are modifying the place.
All places have a radius associated with them, thereby making them circles. You can adjust the radius only in the Maintain My Places window. In the itsy-bitsy map it doesn't even appear. However, if the newly defined place overlaps existing ones, all the photos assigned to the overlapped places will be assigned to the new one. Their pins will remain where they were.
Now, before anybody suggests sending feedback to Apple, let me emphasize that I have been sending Apple feedback on the wrong-headed implementation of Places since iPhoto 9.0. New versions have come and gone (the current one is 9.1.2), but these "features" have remained. So my purpose in opening this thread is to consolidate work arounds to these "features" in one place. My work around:
Whenever I define a new place, I select only a single photo. I try to name my places so that I can distinguish them from those that Google finds. In order to avoid Gotcha 1 I select a place that Google finds and try to place the pin close enough to where I want it, but far enough from any other places that I've defined. I give it a name that I can easily find it Manage My Place.
I immediately open Manage My Places and select the new place. I first note the pins near it, then decrease its radius, move the pin to the desired location, note the nearby places, and give it its final name.
I then view Places and navigate to the new place to view the photos assigned to it. If I'm lucky, there's only one. Otherwise, I have to reassign the other photos to their correct places.
Richard

So... in the hope it will not confuse folks more, let me be more specific of a procedure that works for me...
Procedure to create a new My Places location.
OK there is more you can do with a non-GPS Coord linked photo.
Click Info and then click Assign a Place in the lower right of screen. (if your photo has a location linked to it already the Assign a Place will NOT show up.)
Choose a location name near the actual location that Google Maps can find.
Click that location in the Google Maps list that appears and your photo will be temporarily assigned to that location.
Now type over that location name in order to make sure to give that location a unique name that will show up in your My Places list and click that name after you have typed it to be sure it is accepted.
Now in iPhoto click Window/Manage My Places and go the that newly named location in the large My Places map. There's no easy search. You have to run down through the alphabetical list.
Drag the flag to the location you want this place to be and click Done.
The location name is now in your My Places list at the location you dragged the flag to!
It is important to note that only your unique named locations show up in your Places list, so if you want to modify the location coordinates you have to establish a unique name for it.
This is much more complicated that previous iPhoto versions!
But Yeah!!!!!!!!!!
It really works!!!!!!!

How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .

Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

How to Create a new RODC in an existing domain

Similar Messages

Maybe you are looking for