How to create a new tab inside a existing subtab on a page.

Hi,
How can I create a new tab inside a existing subtab on a page?
If I change directly on the page.xml it will not maintain compatibility with upgrades. Am I right?
Thanks,
Marcelo

Marcelo,
Well basically you are adding a stackLayout bean and using that adding your region. Are you able to see the changes and run the page without any error?
As you are manipulating the file manually, you can never be sure of whether its going to cause issues later on or not. And as mentioned earlier if OAF doesn't support creating the subtab using personalization, there are bound to be some limitations from the framework side. Also what personalization allows is to create items and not regions. So better stick to a rigorous testing to catch any issues early on.
--Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • How to create a new tab in CRMD_ORDER for custom fields

    Hi Expert,
    I have added custom fields in crmd_customer_ i through EEWB .
    Now i want to display the fields in a new tab in CRMD_ORDER.
    can you please guide me how to create a new Tab step by step procedure.
    Thanks & Regards,
    Avi

    Dear Avi,
    please be aware that crmd_order is no longer supported since crm2007 (6.00). That means EEWB is not the right tool to add customer fields because only WEBUI is supported. There you can use the AET tool to create own fields or tables via configuration.
    However please see note 1037748 where you get more information and help.
    Best regards
    Rene

  • How to I get new tabs to open to the correct home page?

    When I open new tabs they just go to a Google Search page, which is very frustrating, especially when I open a new tab and try to type in the URL bar but as soon as it finishes loading Google it blanks out what I typed in and goes to the Google site. In other words, "blank" new tabs do not open to the Favorites page or even my home page. They open to Google. How do I change that? In other words, how do I get new tabs to stop opening to Google and start opening to either my home page or the Favorites screen? Thanks!

    You can modify the <b>browser.newtab.url</b> pref on the <b>about:config</b> page and set it to the desired page to open.
    *http://kb.mozillazine.org/about:config
    See also this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do I set new tabs to open up with my home page?

    When I open up a new tab the screen says "You have opened up a new Tab"....Informative but not particularly helpful... Can I set it so the new tab opens up on the google home page?

    Thanks the-edmeister. Your solution worked a treat. I had a problem with the AVG toolbar overwriting this but once I turned the AVG search bar off it was perfect. Great job. Thanks

  • How to Create a new RODC in an existing domain

    Hello everyone,
    Is anybody could help me with DCPROMO install on RODC 2008 R2 ? I wanna join to an Existing forest. "Create a new RODC in an existing domain". If you could write me step by step cmd would be nice.
    Thank's

    by cmd you mean from command promt?
    If, use something like this:
    dcpromo /unattend:c:\ua.txt
    The file should contain at least this info:
    [DCInstall]
    ReplicaOrNewDomain=ReadOnlyReplica
    ReplicaDomainDNSName=my.domain.com
    SiteName=yoursite
    InstallDNS=Yes
    ConfirmGc=Yes
    CreateDNSDelegation=yes
    UserDomain=my.domain.com
    UserName=user
    Password=P"ssword
    SafeModeAdminPassword=P"ssword123
    CriticalReplicationOnly=Yes
    RebootOnCompletion=Yes
    Best Regards,
    Jesper Vindum, Denmark
    Systems Administrator
    Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

  • How to create a new tab it will show the most recent/viewed page?

    When I accidentally downloaded Incredibar, when open a new tab it keeps showing "My start by incredibar", and also very slow when loading that page. I want to get back my most recent/viewed page. I did delete the Incredibar but the problem still goes on...

    See:
    *[[/questions/930367?page=2]]
    *[[/questions/931841]]
    *[[/questions/860323]]
    Try to reset some preferences to the default with the SearchReset extension:
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the about:addons page.

  • How to create a new full backup alongside existing one?

    I have recently reinstalled my MBP from scratch and installed some apps from scratch as well. I still have my old TM backup in a sparsebundle on my NAS (a ReadyNAS NV+).
    I now would like to create a complete new full backup alongside my existing one. Or put differently, a new folder/backup inside the Backups.backupdb inside the mounted sparsebundle. Currently I see a folder called "XYZs MacBook Pro". I'd like that to be renamed to something like "XYZs Old MacBook Pro" and create a new full backup under "XYZs MacBook Pro".
    I understand you end up having multiple folders inside Backups.backupdb if you have many Macs (with different MAC addresses). I only have one Mac, but want TM to treat my old previous backup (of the same MPB, hence with the same MAC address) as if it was from another Mac (with a different name).
    With such a setup, I can still access backups from my previous installation of the same hardware by selecting another volume from TM (by holding Alt when clikcing at the TM icon) or with tools such as Back-In-Time.
    Is there any way to achieve this? My sparsebundle is large enough to hold another full backup alongside the old one.
    Thanks
    - Tom

    Pondini wrote:
    tofe1965 wrote:
    But wait, you said if I erased the disk I get a new UUID. I did not erase it but I moved all files into a /Previous folder (after booting from the install DVD), then installed the system new, and then moved user data (and some Library and some application stuff) back from /Previous. So, I guess, I have no new UUID for my internal disk.
    Ah, yes, that is different ("reinstalled from scratch" usually means erased). If the disk was never erased, it will still have the same UUID. But since you've moved or replaced virtually everything, it will all get backed up anyway.
    I'm not sure why you did all that; the old +Erase and Install+ and +Archive and Install+ options no longer exist for Snow Leopard: there's just Install, which replaces OSX without touching anything else.
    I wanted to have a *really clean* install as my old systems seemed to be messed up with some bad settings.
    So, back to my original question: how can I make the new "XYZs MacBook Pro" appear alongside the old "XYZs MacBook Pro" and switch volumes when I start TM using the Option key?
    Why would you want to do that? You can view and restore from any backup.
    I figured that way I can keep all old backups from the old installation and not have TM retire old stuff. And start a new one from scratch for the new installation where things will get retired. Basically keep the two backups apart from each other and not see any of the old stuff unless explicitly mounted using the option key.
    If I follow your approach, what happens to old files of the old disk/UUID? Will they get retired eventually? Would my original idea work as envisioned or would it retire old things nevertheless? If the latter is the case, it is of no use and your suggested approach is the better one.
    Is there maybe a ay to force TM to start a new full backup?
    Back up to a different place: a different HD or partition, or erase the current one.
    Guess that's my only option then. I created a full bootable backup to en external USB disk using Carbon Copy Cloner. Erasing the internal disk and copying back using CCC will create a new UUID then I guess ...
    I will try that in the next couple of days and report back here. Thanks a lot for all your help and explanations so far, much appreciated!

  • How to create a new iMovie library from existing events?

    I have had the misfortune of loosing my Mac with all of the data on it BUT fortunately I have kept a copy of all my iMovie events backed up so I've managed to save them.
    Now I have a new iMac and 500Gb+ in the "iMovie Events" folder. I've copied this folder into my Movies folder (in "home" dir) BUT since I didn't also back up the .imovielibrary file I need to create a new library for all these events. The problem I'm facing at the moment is that I'm not sure how to "import" these events in a way that will maintain all/most of the information. I've tried doing the File > Import Media and pointing it to the Movies folder BUT it looked like it was going to import all the files into a single Event, so I chickened out.
    Any suggestions/recommendations? Am I doomed to importing the events one at a time?
    Thanks!

    Looks like I may have found a solution.
    As mentioned above I've copied the "iMovie Events" folder to the place iMovie expects it to be at. And now I've selected: File > Update Projects and Events
    It has recognized that there were a bunch of events that it needed to "process" and has started reading them all.
    It looks like all the events are back, I've not done extensive checking yet, but so far it looks very promising.

  • Why does add-ons Manager create a new tab every time I go to home page?

    When I start Firefox my home page tab shows up along with an add-ons Manager tab and a plus sign for new tab. Every time I go to a web site and then return to my home page ANOTHER add-ons Manager tab shows up. This apparently will go on forever. I have had as many as 20 add-ons Manager tabs showing. The only way to eliminate them is to stop Firefox and then restart. Then it starts all over again. What is causing this?
    I'm running the latest version of Firefox and Windows 8.1 on a Dell Inspiron with 8G's of memory and a 1T hard drive.
    Please help.

    Can you post back here a screenshot from this issue?

  • How to create a new "tab" in the Library?

    Ok I know how to add, change and create playlists but I can't see how to do the to the library.
    My issue is... I have some music clips (mpeg4) which I've sync'd to my Ipod Video and are located in the "movies" tab (both in iTunes and on the iPod). I also have a heap of language lessons which are mpeg4 aswell, what this means is the too are put in the "movie" tab and therefore means my Thai lessons and music clips are all mixed in together.
    Is there anyway around this??
    Cheers for any advice,
    maro.
    MacBook Pro   Mac OS X (10.4.9)   iPod Video 80gb

    You can create ordinary or smart playlists which contain video. You can then access them from the playlist. On your iPod you have to go to the video section and then access the playlist.

  • How to create a new tab to a dialog box in Illustrator CS3 Plug-in?

    Hi,
    Im creating a dialog using Plugin in Visual Studio 2005. I need to add another dialog in tab.
    For example in the existing sample dialog another dialog Test has to be added.. How this can be done?
    Anyone guide me..

    It sounds like you're trying to get a floating panel dialog to dock with another one -- is that the case? If so, that's what I was trying to clarify earlier in the thread; there are tabs on modal dialogs, and there are tabbed docked panels, and they're two different things
    If you're trying to dock two panels, you're on the right track -- you can definitely use sADMDialogGroup->SetTabGroup(). It does require you to know the name of the dialog group you're adding it to though. Typically, you use this functionality to restore a panel to wherever it was when Illustrator was last running, and you use preferences to store the value in the meantime. If you're just trying to stick two dialogs together, you need to make sure of a few things:
    1) They're both using a dialog style from this list: kADMResizingFloatingDialogStyle, kADMFloatingDialogStyle or kADMTabbedFloatingDialogStyle.
    2) They have to both have their Tab Group set to the same string value.
    That should dock them together, but again, typically you just grab the tab group on shutdown and save it to preferences, then on load read it from preferences and set it on the dialog again. That way they get regrouped wherever they last were.

  • How to create a new tab on the left side of bcc home page

    Hi,
    I am trying to create inventory tab at the left side of bcc navigation.
    But I am facing these errors:
    Caused by: javax.servlet.ServletException: javax.servlet.jsp.JspException: An error occurred while evaluating custom action attribute "value" with value "${ac
    r occurred while getting property "activitySourceName" from an instance of class atg.bizui.activity.PortalActivitySource (java.util.MissingResourceException:
    WebAppResources, locale en_US).
    Please let me know how to resolve this.

    modify genericActivityDefinitionFiles attribute in /atg/commerce/web/CommerceActivitySource component to add your customized xml file. you can refer the following xml file:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <!DOCTYPE generic-activities
    PUBLIC "-//Art Technology Group, Inc.//DTD General SQL Adapter//EN"
    "http://www.atg.com/dtds/activitymanager/activitymanager_1.0.dtd">
    <generic-activities>
    <activity>
    <id>RBImporter</id>
         <resource-bundle>com.resources.WebAppResources</resource-bundle>
    <display-name-resource>rbImporterDisplayName</display-name-resource>
    <description-resource>rbImporterDescription</description-resource>
    <destination-page>
    <url>/publishing/RBImporter/RBImportManager.jsp?project=</url>
    <clear-context>true</clear-context>
    <acl>Profile$role$epubAdmin:read;Profile$role$epubSuperAdmin:read;Profile$role$GlobalMerchandiser:read;</acl>
    </destination-page>
    </activity>
    </generic-activities>

  • How to create a new folder in the existing role

    hi,
    i need to save the workbook trial balance under the folder trail balance currently the workbook is under BW Reporting folder ,but for that i need to create a Trial Balance folder and move the trial balance workbook to that particular folder
    could anyone of you help me.
    Thx
    apparao

    Hi,
    You have to:
    -Tx(PFCG)
    -Select the role that you want to create a folder
    -Go to "Folder Tabsheet"
    -Create your folder
    -Save
    -Open your workbook
    -Save the Workbook into this role in the corresponding folder.
    Regard, hope it helps
    Assign point if useful please.

  • How do I have new tabs be a blank page with curser in address bar.

    When I create a new tab it opens on yahoo's search page. I have to mouse over and click in the address bar to type an address. Or I can hit tab 10 or so times. I used to just hit control+t and I could start typing the URL.
    How do I change it so a new tab is ready to go, that is, all I have to do is start typing the URL, bookmark name etc?

    A new tab should open with a blank page by default.<br />
    If that isn't happening then you have an extension that is casing it.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • What is the BADI to create a new tab in ME21N transaction

    Hi,
    I have created a new document type zbr with the transaction spro.
    I wanted to add a new tab for the given document type zbr. How to create a new tab for the document type.
    How to create a new tab using BADI. what is BADI used to create the tab

    Hi,
    Pls check BAdI 'ME_GUI_PO_CUST'  for your reqmt.
    Pravat.
    <i>*Reward points if helpful</i>

Maybe you are looking for

  • If i bought an iphone from New York, will it work with a moroccan network?

    if i bought an iphone from New York, will it work with a moroccan network?

  • Scheduled CR not changing parameter value in Infoview or CMC

    Hello: I have a crystal reports build with CR 2008 SP2, FP 2.3; that is based on BEx Query with 3 sap bw variables. When refreshing the report in CR Designer, I can change the parameter value and get the right results. When in Infoview or CMC I can r

  • Best way to export a mass amount of icons? (CS3)

    Hello. I have a PSD file with 300 text layers and a background graphic with a transparent background.I need to export each text layer with the background graphic as a transparent 24-bit PNG. I was going to use an "export each layer as file" script, b

  • Safari 4.0.3 crashes on startup

    My white MacBook (2 GHz) crashes every time I open it. Here's the report. Hope you can help. Process: Safari [486] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 4.0.3 (5531.9) Build Info: WebBrowser-553109

  • Class extends JPanel ? help

    i have a class that extends JPanel and i have all my buttons , textfields created on it. so how do i call the class to display the panel on a frame? asuming class is the class that extends JPanel class newPanel = new class(); f.contentPane.add(newPan