How to create a non-cumulative key figure & How to make a info cube as so
Hi Experts,
How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
Can any one kindly provide me the steps we need to performe?
Thanks in Advance,
Raj
Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram
Similar Messages
-
Using Non cumulative key figure in Real time cube
Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
RavikanthHi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee. -
Non-cumulative key figure in Real Estate implementation
Hi all,
I am implementing Real Estate Module in BW. We are doing analysis on Condition amount ( BKOND).
The mapped Info Object on BW side is 0COND_AMT, according to standara info sources given by sap ( for e.g in 0RE_3) and it is defined as a Non-cumulative KF with Non cumulkative Change 0COND_CHG.
Can anybody plese explain me the logic behind this. and also source field and table for this 0COND_CHG in R/3 side.Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee. -
Integrated Planning and Non-cumulative key figure
Hi
I´m creating an Integrated Planning application and a problem has occurred. The users want to plan on inflow and outflow and at the same time have a row with the total sum in the same layout (they are planning on 0CALMONTH and 0ORGUNIT) This can e.g. be solved through use Web Application Designer with one planning query and one traditional query.
Any way. I have created a non-cumulative key figure with an inflow- and an outflow key figure. The problem is that the non-cumulative key figure starts working first when I change the planning mode from plan status to load status. I could use function modules, to change the status, behind the save button but there are several users who are planning at the same cube at the same time and I don´t want to lock the others from planning.
How to solve this?
- Is it possible to restrict the switching, from plan to load, by setting some kind of filter at the users org.unit? (0ORGUNIT is an authorization object)
- Is it possible to create a process chain and then load the data to another cube for reporting at just this key figure? And also here have a filter at the org.unit
I will gladly get all kind of idea and input to solve this problem. Maybe there is some other way to go than using non-cumulative key figureu2026Thanks for your answers
I have tried different scenarios and I will use a u201Dsave-buttonu201D. In the save-button I use the commands SAVE_DATA and EXECUTE_PROCESS_CHAIN. The command u201CEXECUTE_PROCESS_CHAIN starts a process chain that switches from plan mode to load mode and then back to plan mode again.
One new problem has arisen. The non-cumulative key figure is updating if an existing value (inflow- or outflow) is changed. But if an input is made to an empty cell, without value, nothing happen when I press on the start-button. BUT if I refresh the browser the non-cumulative value is updated!!!
Is there any command in WAD that refresh the whole page? If so I can include it in my start-button.
If not, any sugestion on how to solve the problem?
Best regards
Mikael -
Problem with Non-cumulative key figure.
Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi RBeing a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra -
Samples of non-cumulative key figure
hi experts,
can u give me samples about:
1> in what scenario should i use the non-***.Value change to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : (here chose sum?)
Exception Aggregation:(here chose sumation?)
Agg.Reference Char : (here chose a 0calday?)
N-*** with N-*** Value Change
Non-***.Value Change: (here what to insert?)
2> in what scenario should i use the inflow/outflow to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : (here chose sum?)
Exception Aggregation:(here chose sumation?)
Agg.Reference Char : (here chose a 0calday?)
N-*** with In- and Out-flow
Inflow : (here what to insert?)
Outflow: (here what to insert?)hI
1> in what scenario should i use the non-***.Value change to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : sum
Exception Aggregation: sumation
Agg.Reference Char : 0calday-----* U CAN GIVE 0CALMONTH too to view head count month wise.*
N-*** with N-*** Value Change
Non-***.Value Change: * If u are maintaining delta value ie if no. of employees joined is 10 and resigned is 6, then delta value is 10-8=2*
in this situation use this type.
2> in what scenario should i use the inflow/outflow to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : sum
Exception Aggregation: sumation
Agg.Reference Char : 0calday
N-*** with In- and Out-flow
Inflow : *Inoobject which maintains no of employess joined *
Outflow: *Inoobject which maintains no of employess resigned. * -
How to create non cumulative Key Figure.
Friends Let me know steps for creating Non Cumulative Key Figure, can any one tell me where can i get documents for this. points will be rewarded
Hi,
check these help links
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/95/1ae03b591a9c7ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6312e07211d2acb80000e829fbfe/content.htm
It's a big topic so it's not possible to write everything here.
You can search the forums also.
Thanks -
How use non cumulative key figure and noncumulative key figure screenshot
how use non cumulative key figure and noncumulative key figure screenshot
Hello,
Please see this docs for Non-Cumulative and Snapshot scenario,
[How to Handle Inventory Management Scenarios in BW (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
[Non-Cumulative Values / Stock Handling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366]
Thanks
Chandran -
How to display Non Cumulative key figure data
Hi,
I want to check if there is any data for a non-cumulative key figure. While i am trying to display the data from cube or Multi provider, it is not showing this field. is there any way to check the data for this field other than using reports.
Regards,
VishnuHi,
Take Eg: Quantity of valuated stock - 0VALSTCKQTY it is combination of
Quantity Received into Valuated Stock- 0RECVALSTCK and
Quantity Issued from Valuated Stock- 0ISSVALSTCK
In report you can see only 0VALSTCKQTY Keyfigure.
And the above Two Keyfigures are filling by Routines using Process Keys.
This is for 0IC_C03 and data you can check in MB5B Tcode in ECC.
Check;
Note 745788 - Non-cumulative mgmnt in BW: Verifying and correcting data
Thanks
Reddy -
Trouble with Non Cumulative Key Figures
Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps. -
Purpose of Non Cumulative key figures
Whatu2019s the purpose of Non Cumulative key figures?
Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM -
Bad performance with non-cumulative key figures
Hi All,
I have a cube with 8 non cumulative key figures based on fiscper.
I am not sure how the performance for reporting with non-cumulatives can be improved.
Thanks
KarenPerformance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
For actual stock, the more you compress the better it is.
Regards,
Fred -
When do you go for non cumulative key figures?
hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hariHi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya. -
Planning on Non-Cumulative Key Figure
Hello,
is it possible to plan data on a non-cumulative Key Figure?
SAP_ABA 701 0005 SAPKA70105 Cross-Application Component
SAP_BASIS 701 0005 SAPKB70105 SAP Basis Component
PI_BASIS 701 0005 SAPK-70105INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BW 701 0005 SAPKW70105 SAP Business Warehouse
BI_CONT 704 0003 SAPK-70403INBICONT Business Intelligence Content
ST-A/PI 01L_BCO700 0000 - Servicetools for other App./Netweaver 04
We implemented also the How-to Paper Copy and Paste in the Web Template but it isn't working in a proper way. UnderPrerequistes in the How-to Paper I found IE 7.0 and Clipboard. But I was informed that we have an higher Level.
Thank you in advance for your help.
Kind Regards
DorisNot possible.Please find the help link for more details.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma -
Non Cumulative Key Figure help
Hi All,
I am in need of setting up a non-cumulative key figure in a cube. When I load from my ODS everything is ok, however during a delta process, this field at times gets
summarized when in fact it should be static or in an overwite mode. Can someone provide some advice/comments on how I can set up my key figure field in a basic cube to be static yet be able to be used in a calculation for a query? I do not want to apply any functionality such as aggregation, average etc. In R/3 LIS functionality, you basically set up a characteristic Key Figure, how can this be done in BW ?
Best Regards,
DennisDennis,
Check if you ahve declared the KF properly and also check the query which you use ...
Load data and then compare with the query at the lowest level of data in the ODS. Then you will know if the update rules are correct.
Arun
Maybe you are looking for
-
BEx Cell Report - Performance Issue
All, We have a BEx Report in which I have used cell formulas extensively. My BW ver 3.0B and parch 31. From last f32 weeks this report is working only for maximum of 9 materials. Tthe report output comes very fast. The momemnt I give 10th material or
-
Hello. I have had an Audigy 2 Platinum for over a year now and use it as a decoder for our pioneer stand alone dvd player.Speakers are Megaworks 550. The problem is the audio lags behind the video after an hour or so into the movie. The souncard is i
-
Hp officejet pro 8610 wireless not connecting to my laptop
I have connected my HP Officejet Pro 8610 to my wireless network to my laptop But when I go to install drivers wirelessly, I get connection failed. 1. download: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers2. us
-
Hello, I need some suggestions on what might be the best way to handle security in my application. The application acts as a control panel with an initial login screen. When a user logs in it needs to be given access to certain menus and buttons base
-
Hyper-V. Resource aggregation. Resource pool.
Hello, everyone, I have a question to Technet community. Hopefully, someone will be able to help. We're in the process of building a new Hyper-V environment, and the interesting question has arisen once again. Is there any way to compartmentalize all