How to create a Non Excisable Location

Hi,
While creating a Location is it mandatory give excise details, like selection of XM/XD/None ? if not please explain the procedure.
Thanks,
Kumar.

Hello Kumar ,
XM = if your client manufacture excise materials then you should this option.
XD = client only Deliar means purchase and sales excise materials then select this option.
None = not deal in excise.
So whenever you select excise option on warehouse then system ask for one of the option menas what is your business.
This field is mandatory if Excisable is selected for Warehouse.
Once transactions exist for the location with this ECC No., you may not change the ECC No.
Thanks
Manvendra Singh Niranjan

Similar Messages

  • How to create a non-cumulative key figure & How to make a info cube as so

    Hi Experts,
    How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
    Can any one kindly provide me the steps we need to performe?
    Thanks in Advance,
    Raj

    Hi Azael,
        In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
    Hope this helps!
    Regards
    Sriram

  • How to create a non editable PDF

    How to create a non editable PDF in PDF writer 5 & 6 Professional.

    There was a PDF Writer driver available in AA 5 (not in AA 6). It was part of the custom install and was not recommended for use. In AA 5, the Acrobat Distiller printer was preferred. In AA 6, the name was changed to the Adobe PDF printer. In any case, once you have the PDF, open the PDF in Acrobat and go to the document properties. Select the security options to restrict changes and/or extracting text. The security is not all that robust, but works for most folks.

  • How to create a non downloadable pdf in Adobe reader X?

    Hi,
    How can I create a non downloadble pdf in Adobe Reader X. Please help.
    Regards,
    Shreya

    Good day,
    To Bernd's point, you cannot stop someone from downloading your PDF (or any file for that matter) if you put them onto the Internet.  There are ways of limiting how long a file can be viewable for through some server side software options, but ultimately, to your original question, you cannot create PDF files with Adobe Reader.
    Regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • How to create a non hiding dialog box in swing

    Hi there,
    I want to create a non hiding Dialog box similar to MS Word Find/Replace dialog.
    The Dialog should not hide when the focus is lost. Instead it should become inactive & should remain on the top.
    Could someone please let me know how to create such a dialog in Swing?
    You help is highly appreciated.
    Thanks
    Rakesh Nagar
    [email protected]

    have a look at -
    http://forum.java.sun.com/thread.jsp?thread=327331&forum=57&message=1331793
    ManishRaje.

  • How to create a non-destructive luminosity/b&w mask for (de)saturation?

    Someone asked me this question: CG renders (created in Modo, Max, Blender, Maya, Vray, Octane, etc) can be made to look more realistic by desaturating the colours in the highlights. It was also requested that this move would be done in 32bpc as well (something that is often required in a CG compositing workflow).
    This is easy enough to do: create a selection based on luminosity (or a black and white version of the image), and use that as a layer mask in the Hue/Saturation adjustment layer, and turn down the saturation.
    However, this is a destructive action: suppose we want to import an external file as a smart object, and then we need the option to have the file automatically update with any change we make to the original artwork.
    In that case we would have to recreate that luminosity mask again and again as well.
    Ideally, an update of the external file will result in an automatic update of the entire layer stack.
    Now, in Photoline this is easy to do:
    Since layer masks behave like regular layers in PL, and layers can be virtually cloned (not unlike smart objects), it is a mere case of cloning the original external file layer twice, and adding adjustment layers. Finally, that one instanced layer is used as a layer mask for the adjustment layer that controls the saturation. Done.
    Replacing or editing the original source will then automatically update and cascade the changes through the entire layer stack.
    This is a very handy technique to have! Since I teach Photoshop classes, I thought this would also be handy to know how to do in Photoshop, and I tried several methods (clipping masks included), but I cannot seem to achieve the same non-destructive result. Clipping masks do not work with adjustment layers. Groups cannot be used as clipping masks. Layer masks cannot reference a smart object.
    I have a feeling there ought to be a reasonably straightforward method to achieve this, but how?
    Would anyone have a suggestion how to solve this in Photoshop in a non-destructive way?

    csuebele wrote:
    I'm still not seeing it. Your example does not have a pixel based layer clipped to the group which is causing my problem. I hope I can explain this. See below. the layers in the group create the "mask". In this case a b&w adjustment layer was added to control how the "mask" is converted to b&w. You can see what these layers look like in the mid section top section of the image. any color showing though is from the very bottom layer, as the group has a blend if on it allowing the shadows to come through. The top image has a curve layer with no adjustment, while the bottom image has a curve layer to clip more of the shadows. You can see this change in the upper right corner of both images. The curves are allowing more of the image to be clipped in the area is masked out on layer "Layer 0 copy 1", as more of the color of the base layer is showing though. However, that b&w areas are suppose to be just the mask and you should see the b&w, just color as seen in the bottom image. However, the curves are not changing the transparency in the areas that have the layer to return the color.
    I don’t get it – what good is the pixel Layer ("Layer 0 copy 2") clipped to the Group supposed to do? Don’t you want to use the Mask on an Adjustment?
    Edit: Maybe this can help clarify how I suppose the issue would be approached.

  • How to create a non-unicode transport on a unicode system?

    Folks,
    Occassionally, I have to create transports for some of the functions from our unicode-based SAP system. The created transports by default are unicode and thus cannot be installed on a non-unicode SAP client. Is there a way to create non-unicode transport from a unicode SAP system?
    Note that the transport contains only the code (function modules). There is no data.
    Thank you in advance for your help.
    Regards,
    Peter

    Hi Peter,
    Note 638357 - Transport between Unicode systems and non-Unicode systems
    Regards
    Ashok Dalai

  • How to create a non-accessible script?

    I have to develop a script member that contains some procedures and functions.
    Is there a way to produce some "hidden" script?
    I think the first solution is to put this script in an external cast and protect it (AKA make it CXT).
    But...
    Is there a way to hide all variables so they cannot be seen as globals?
    Thank you.

    hi shylock - I hope all is well in your part of the world.
    I’m not fully following this discussion , but thought this might be of some help
    I don’t know of any way to hide just part of a dir file / script - (without hiding it all)
    but…
    Over the years I’ve bought a few dcr games from other developers who didn’t want to sell me their source code.  (cheeper cost to buy them - but impossible to upgrade without paying for their help)
    With a bit of effort I was able to embedded their dcr programs right inside my own program.
    The idea would be to make a program that contains just the functions you wish to achieve
    You’ll have to write it in such a way, that you’re able to pass it the variables it requires to execute the function / procedures that you have made.
    Also when it’s finished doing what ever you want it to do, that it’s able to return to the other developer what ever variables you want to give them back.
    You save this program as a .drc
    Next you have the other developer import this drc file into their own director program.
    You’ll need to give them all the instructions on what special variables they will need to feed your dcr program, and tell them what they are going to be given back.
    Is this the sort of thing you a talking about? - or did I just miss the mark again
    regards
    milky

  • Do Any One Can explain How to Create Non-Summing Key Figure??

    Hi Guru's,
    Can Any buddy explain how to create a Non-Summing Key Figure?
    Details:
    I am creating Three Key Figures, One of them are Ticket Number's.
    Ticket Number supposed to be a Characteristic, but I was asked to do it as a Key Figure.
    If I create it as normal KF, then the Ticket Numbers will be summed, isn't it?
    Your Help much appreciated.
    Regards,
    BH

    Hi,
       If you are going to use that keyfigure in ODS, in Update rule you are having the option 'OVERWRITE' .
      choose Overwrite for that keyfigure instead of 'Addition'.
    rgrds,
    v.sen.

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create odbc (dsn) connection for OBIEE AND INFOR in unix environment

    Hi,
    we are establishing OBIA in Unix environment we set all the things fine but we are getting problem how to create ODBC connection
    for INFORMATICA AND OBIEE. I searched some blogs thats telling there is a ODBC.INI file we need to configure.
    but i am not getting clear idea to give parameters and it will not showing any TNSNAME ..........etc
    please any body give clear idea about how to create ODBC connection and LOCATION of that file AND parameter which i need to give.
    Thanks,
    charan....

    Hi Dpka,
    yah i already checked that one but i have not find out any parameter for TNS NAME information.
    is OBIEE connected to ORACLE DATA BASE without giving TNS information?............in UNIX OPERATING SYSTEM.
    pls give me the clear idea abt how to connect OBIEE, INFORMATICA to ORACLE DATA BASE IN UNIX ENVRNMENT
    thanks,
    charan.

  • Create New NON SA User

    Hi all,
    I want to create new user for following operations.
     1. Send DB mail.
    2. Execute ad hoc queries(eg. read/write excel sheet,csv,txt files etc.)
    3. can't access other database.
    4. He should owner of particular database.
    5. Access other server table. (optional)
    Can you please tell me how to create new non sa user with above requirement. If any one give me any example its really appreciated.
    Thanks in Advanced.

    Hi AK9841
    It is look like your current problem is not related to the original question. As
    TiborK mentioned we need more information regarding the error that you get. I dont want to start a guessing game :-(
    * In any case you could open a new thread for this question :-)
    ** using OleDB provider you connect to external resources (ms-access file in your case). the user and password that you use in the connection has nothing to do with the SQL Server or the database that you are using but to the external resources. This is basically
    the same as any connection to a remote database using OleDB provider.
      Ronen Ariely
     [Personal Site]    [Blog]    [Facebook]

  • Both excisable and non-excisable items are in a same location (Warehouse)

    What will be best solution for the client (of SAP B1 2007 B PL7), those who have both excisable and non-excisable items are in a same location (Warehouse)...??...Is there any need to create two warehouses?... but how will be the excisable setting???

    Hii Das
    The best solution would be only to create two diffrent ware house for excisable and non excisable
    , to avoid unneccesary confusions, and to stay away from un avoidable errors
    Thanks
    Rizz

  • How to create billing document  in VF01 without Excise duties. ?

    Dear All ,
    Here is a scenario that we had done the Goods rcv of a  material without capturing   any excise entry as this material is non excisable , Now an ETO is created  for a  party , After this user   wants this material  to be given to Customer by creating an outbound delivry after this in VF01 hehad given this outbound delv  but here excise duty is reflecting , but user want to not to reflect the excise duty , he only wants to apply taxes only ,  Pl guide to how to create billing without having excise duties , only applicable tax should bi there in the
    billing document .
    Regards ,
    sap11
    Edited by: sap11 on Jul 18, 2008 1:52 PM

    Hi
    SAP 11
    Please maintain CHAPTER ID of the said material with zero basic excise duty ( If u r not selling this material as a duty paid ) and select non movatable mateial. Parellaly u please maintain customer excise indicator as 0 no excise ( If this cutomer code is not lifting duty paid material for you).
    This way u can create billing without excise.
    Please try.
    Thx

Maybe you are looking for