How to create a non-unicode transport on a unicode system?

Folks,
Occassionally, I have to create transports for some of the functions from our unicode-based SAP system. The created transports by default are unicode and thus cannot be installed on a non-unicode SAP client. Is there a way to create non-unicode transport from a unicode SAP system?
Note that the transport contains only the code (function modules). There is no data.
Thank you in advance for your help.
Regards,
Peter

Hi Peter,
Note 638357 - Transport between Unicode systems and non-Unicode systems
Regards
Ashok Dalai

Similar Messages

  • How to create a non-cumulative key figure & How to make a info cube as so

    Hi Experts,
    How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
    Can any one kindly provide me the steps we need to performe?
    Thanks in Advance,
    Raj

    Hi Azael,
        In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
    Hope this helps!
    Regards
    Sriram

  • How to create a non editable PDF

    How to create a non editable PDF in PDF writer 5 & 6 Professional.

    There was a PDF Writer driver available in AA 5 (not in AA 6). It was part of the custom install and was not recommended for use. In AA 5, the Acrobat Distiller printer was preferred. In AA 6, the name was changed to the Adobe PDF printer. In any case, once you have the PDF, open the PDF in Acrobat and go to the document properties. Select the security options to restrict changes and/or extracting text. The security is not all that robust, but works for most folks.

  • How to Create BC SET using Transport Request

    Hi,
    How to Create BC SET using Transport Request.if any one knows help me

    Hi Gowri,
    The below given description might help u out ..
    You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
    This Customizing request is a change request with which you can copy and transport the changed system settings.
    The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
    You can subsequently edit BC Sets created from transport requests.
    Procedure
    Enter the Customizing request number and Continue.
    -> You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
    -> You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
    ->The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
    ·        green traffic light: The transport object can be put in the BC Set.
    ·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
    ·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
    ·        Cancel: The transport object cannot be interpreted or put in the BC Set.
    You can get detail information about the object at the bottom of the screen, by double-clicking on a row. For detailed information about messages, choose the icon in the Documentation column.
    The Activity column indicates the associated IMG activity. If no unique assignment is possible, the field is empty. To assign an activity or change an existing assignment, choose the Change Activity icon. Position the cursor on the IMG activity to which you want to assign the object, and choose Select.
    When you have made your choice, choose the Save Data from Transport Request icon.
    Make the necessary entries in the following dialog box Create Object Directory Entry. Choose Save.
    To create the BC Set with the selected rows, choose Save.  
    When you read the transport request, the data records are initially only read in the logon language. When you save the BC Set, all languages in the system are also put in the BC Set.
    You can edit the BC Set manually at any time. Proceed as described in Change BC Set.
    Reward if helpful.
    Thankyou,
    Regards.

  • How to create a non downloadable pdf in Adobe reader X?

    Hi,
    How can I create a non downloadble pdf in Adobe Reader X. Please help.
    Regards,
    Shreya

    Good day,
    To Bernd's point, you cannot stop someone from downloading your PDF (or any file for that matter) if you put them onto the Internet.  There are ways of limiting how long a file can be viewable for through some server side software options, but ultimately, to your original question, you cannot create PDF files with Adobe Reader.
    Regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • How to create a non hiding dialog box in swing

    Hi there,
    I want to create a non hiding Dialog box similar to MS Word Find/Replace dialog.
    The Dialog should not hide when the focus is lost. Instead it should become inactive & should remain on the top.
    Could someone please let me know how to create such a dialog in Swing?
    You help is highly appreciated.
    Thanks
    Rakesh Nagar
    [email protected]

    have a look at -
    http://forum.java.sun.com/thread.jsp?thread=327331&forum=57&message=1331793
    ManishRaje.

  • How to create "package name" for transport request

    Hi experts
    I am trying to create transport request for infopackage/data source/dtp etc...
    but system is asking package name in object directory entery.
    Could you pl. share the information step by step, how to create the "package name"
    Thanks in advance and you can get valuble points pl.
    Chandu

    Hi,
    Go to transaction SE21 and give the package name as ZAPO or any thing starts with Z.
    click on create button.
    give a short description
    in the Package properties block- allowed object types list box - select No restrictions.
    in the transport attributes block- specify the transport layer
    give software component as HOME
    select the check box for changes recorded.
    save the package.
    or
    Go to SE80
    select package from the list box
    give your package name and hit enter button
    the popup asks you for input.
    give the appropriate values and press create button.
    Note: You should be registered as a developer in the system where you are creating the package.
    Hope this solves your problem, Good luck
    Srini

  • How to Create Merchandise Category Reference Article in IS-Retail system

    Hi Experts,
    Is there any separate Tcode to create Merchandise Category Reference articles in IS-RETAIL system.
    Whether Merchandise Category reference article is created as normal article in MM41 only?
    Whether we can assign any of the article that is created in that merchandise category as reference article in WG21 (or) is there any separate Tcode to create Reference articles.
    During Retail Implementation projects, how Merchandise Category reference article are handled???
    Any Input is highly appreciated.
    Thanks and Regards,
    Selvakumar.M

    Hi,
    With Tcode WG21 u can create MC ref. article. It is a way to create MC ref article. No need to use MM41.
    Regards,
    Rahul

  • How to create OID attributes from command line in unix system

    Hi,
    I have to create OID attributes through ldif files in unix system. I dont know how to run it in unix system under which folder. I already have ldif files for creating OID attributes. Please help.

    Hi,
    unser the /your_ODI_HOME/agent/bin folder.
    Excute this
    sh startscen.sh REFRESH_ID 001 GLOBAL 5 -NAME=agent_ODI
    REFRESH_ID=Your Scenario name
    001:Version
    GLOBAL:Context name
    5=Log Level
    agent_ODI=Your agent name
    Regards

  • How to create a non-destructive luminosity/b&w mask for (de)saturation?

    Someone asked me this question: CG renders (created in Modo, Max, Blender, Maya, Vray, Octane, etc) can be made to look more realistic by desaturating the colours in the highlights. It was also requested that this move would be done in 32bpc as well (something that is often required in a CG compositing workflow).
    This is easy enough to do: create a selection based on luminosity (or a black and white version of the image), and use that as a layer mask in the Hue/Saturation adjustment layer, and turn down the saturation.
    However, this is a destructive action: suppose we want to import an external file as a smart object, and then we need the option to have the file automatically update with any change we make to the original artwork.
    In that case we would have to recreate that luminosity mask again and again as well.
    Ideally, an update of the external file will result in an automatic update of the entire layer stack.
    Now, in Photoline this is easy to do:
    Since layer masks behave like regular layers in PL, and layers can be virtually cloned (not unlike smart objects), it is a mere case of cloning the original external file layer twice, and adding adjustment layers. Finally, that one instanced layer is used as a layer mask for the adjustment layer that controls the saturation. Done.
    Replacing or editing the original source will then automatically update and cascade the changes through the entire layer stack.
    This is a very handy technique to have! Since I teach Photoshop classes, I thought this would also be handy to know how to do in Photoshop, and I tried several methods (clipping masks included), but I cannot seem to achieve the same non-destructive result. Clipping masks do not work with adjustment layers. Groups cannot be used as clipping masks. Layer masks cannot reference a smart object.
    I have a feeling there ought to be a reasonably straightforward method to achieve this, but how?
    Would anyone have a suggestion how to solve this in Photoshop in a non-destructive way?

    csuebele wrote:
    I'm still not seeing it. Your example does not have a pixel based layer clipped to the group which is causing my problem. I hope I can explain this. See below. the layers in the group create the "mask". In this case a b&w adjustment layer was added to control how the "mask" is converted to b&w. You can see what these layers look like in the mid section top section of the image. any color showing though is from the very bottom layer, as the group has a blend if on it allowing the shadows to come through. The top image has a curve layer with no adjustment, while the bottom image has a curve layer to clip more of the shadows. You can see this change in the upper right corner of both images. The curves are allowing more of the image to be clipped in the area is masked out on layer "Layer 0 copy 1", as more of the color of the base layer is showing though. However, that b&w areas are suppose to be just the mask and you should see the b&w, just color as seen in the bottom image. However, the curves are not changing the transparency in the areas that have the layer to return the color.
    I don’t get it – what good is the pixel Layer ("Layer 0 copy 2") clipped to the Group supposed to do? Don’t you want to use the Mask on an Adjustment?
    Edit: Maybe this can help clarify how I suppose the issue would be approached.

  • How to create a Non Excisable Location

    Hi,
    While creating a Location is it mandatory give excise details, like selection of XM/XD/None ? if not please explain the procedure.
    Thanks,
    Kumar.

    Hello Kumar ,
    XM = if your client manufacture excise materials then you should this option.
    XD = client only Deliar means purchase and sales excise materials then select this option.
    None = not deal in excise.
    So whenever you select excise option on warehouse then system ask for one of the option menas what is your business.
    This field is mandatory if Excisable is selected for Warehouse.
    Once transactions exist for the location with this ECC No., you may not change the ECC No.
    Thanks
    Manvendra Singh Niranjan

  • How to create a non-accessible script?

    I have to develop a script member that contains some procedures and functions.
    Is there a way to produce some "hidden" script?
    I think the first solution is to put this script in an external cast and protect it (AKA make it CXT).
    But...
    Is there a way to hide all variables so they cannot be seen as globals?
    Thank you.

    hi shylock - I hope all is well in your part of the world.
    I’m not fully following this discussion , but thought this might be of some help
    I don’t know of any way to hide just part of a dir file / script - (without hiding it all)
    but…
    Over the years I’ve bought a few dcr games from other developers who didn’t want to sell me their source code.  (cheeper cost to buy them - but impossible to upgrade without paying for their help)
    With a bit of effort I was able to embedded their dcr programs right inside my own program.
    The idea would be to make a program that contains just the functions you wish to achieve
    You’ll have to write it in such a way, that you’re able to pass it the variables it requires to execute the function / procedures that you have made.
    Also when it’s finished doing what ever you want it to do, that it’s able to return to the other developer what ever variables you want to give them back.
    You save this program as a .drc
    Next you have the other developer import this drc file into their own director program.
    You’ll need to give them all the instructions on what special variables they will need to feed your dcr program, and tell them what they are going to be given back.
    Is this the sort of thing you a talking about? - or did I just miss the mark again
    regards
    milky

  • How to make an entry in transport tab of business system in SLD

    Hi gurus,
    In PI, in SLD we maintain Business systems. In this business sytem if we go to have a detail look there is a Transport tab.
    What is this used for and how to make an entry here.
    I'm a basis person and i'm configuring XI for the first time. Kindly help.
    Regards,
    Priya

    1. Yes , you have to maintain target business system for the EACH BS in PROD system.
    2. Normally we do have 2 different sld one is explictly for production system. another one is for dev and QA system. Once u done creating all the systems needed for the project. we will copy all business from the dev server to production server. So production server will have all BS from Dev and  BS of production server.
    3. i am not sure about this. i dont have particular docuemnts . normally we assign target business system in transport tab. and in Intergration Directory we will export the business system from DEV and and import the business system in production system.
    Regards,
    Balaji
    Edited by: Balaji Pichaimuthu on May 19, 2010 9:06 AM

  • How to Create Certificate at the ECC 6.0 ( Trusting System ) in STRUSTSSO2

    Hi Experts,
    We are in the process of setting up Log On Ticket Based SSO Back End Connectivity from Portal to ECC 6.0 .
    But, in STRUSSO2 when I try to Export the Certificate it has text file cert. And this cert is not
    being accepted by Portal side i.e. at keystore Page while I try to import this Cert there , it say that
    invalid Cert . Beside this, .der and .pse ..which one we need to use ?
    So, I need to create first the Cert at the ECC side so that I can export and then import at the Portal.
    How do I create Cert in STRUSSO2 at the ECC Side  ?
    Also, do I need to create the RFC JCo destination at the Portal side ? Or Just the User Mapping at the Portal side is enough .
    Any / ALL Help is most welcome and would sure, be rewarded with appropriate point in addition to the
    sincere appreciation of  your time and help in the matter.
    Thanks,
    Regards,
    - Ishan

    Hello. You need to export sertificate in "binary" mode, from MENU --> Certificate --> export. Read for example http://help.sap.com/saphelp_nw70/helpdata/EN/fa/741a403233dd5fe10000000a155106/frameset.htm
    I'ts about BW but the same sense. 
    P.S. you say "SSO Back End Connectivity from Portal to ECC 6.0" ,you need to create iViews in portal and see the ECC pages? For this you need to export Certificate from "Portal" and import in ECC ,and add in ACL in required client. Export from portal : System Configuration --> system administration  --> keystore administration --> export verify.der
    Read :
    http://help.sap.com/saphelp_nw70/helpdata/EN/0a/a354426fdeb430e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/78/f1a8490e7011d6999500508b6b8a93/frameset.htm
    Regards.
    Edited by: Sergo Beradze on Jul 13, 2008 2:41 PM

  • How to create a connection between EP-Portal and BW system

    Hi friends ,
    Can you pl expalin me How ro connect EP to BW ,I have created an Iview in the portal to get some BW data using BSP application .How to assign Iview to system object ? and what are parameters i need to give in the system object .
    Thanks,
    Sunitha Reddy

    Probably better asked in the PORTAL forum. But anyways...
    Create iView for BI.
    Assign BI iView the ALIAS of your BI system (this assumes you created a BI system object previously and assigned it an alias)
    Just that easy.
    If you are on BI 7, then your BI might have it's own portal and you can create a federated portal network between BI and your portal. It works GREAT and is easy as cake.

Maybe you are looking for