How To: Create a Numbered Grid.

In photoshop, How would I create a grid with sequential number in any corner of each square?
Thanks in advance for your help!

JJ's right with PS. With IND, super simple (which forum???):
Data merge, multiple records. Master doc of grid element (text box with 1/2 width stroke) with number in corner. Excel csv file with header and numbers (a2 is "a1+1"). Merge and presto. You'll need a big box to finish off the edges (still at 1/2 width). You'll also need to plan your grid and Excel file, otherwise your grid will be incomplete (tho step and repeat will finish it off for you).
J

Similar Messages

  • How to create/change layout grid in MIR7/MIRO

    Dear all,
    How to create/change layout grid in MIR7/MIRO??I want to change the order of the items table.
    Thx.
    Icuk Hertanto

    Check SAP  Note 315586 - MIRO: Creating and changing display variants for Step by Step guidance.

  • How to create an occupancy grid map

    I am using a LIDAR sensor (URG-04LX) to map an environment for DaNI 1.0 in LabVIEW Robotics 2010 module.  I want to create an occupancy grid map of the environment to use for path planning purposes. Can anyone provide me with any assistance. I have looked at the examples for path planning using the A* technique on an occupancy grid but I don't understand how to create the occupancy map.

    ... everyone above as told you how to create and LABVIEW occupancy map.... using an occupancy map.
    The labview VI assumes you know exactly what the envrioment is like. Meaning you pretty much have some representation of the enviroment.
    What you want to know is how do I generate and occupancy map using a laserscanner. For this you would need something called SLAM. Simultaneous localisation and Mapping. In order generate an occupancy map you need to continously localise your system so you can map laser measurements with refference to a fixed refferece frame, you then have to localise with respect to your map and repeat. This is non-trivial !
    unfortuently there is no LabviewVi to do this for you, and there is not much working example code. So honestly if you want to do this, i would use a robotic development framework call ROS and using gmapping (which is a SLAM package). Alternatively if you inist on using labview you could create a dll of the gmapping (open source libary) and call it from labview, Our you could try to implement it from scratch yourself....
    I just wish it was easier to use opensource libaries like pcl,opencv and integrate with textbased langauges using a labview system... it would make labview so much better, but labview robotics i feels is not really a good robotic application framework comapared to alternatives like ROS which have much bigger communities and much more modules of code you can use... escpecially for SLAM 
    https://decibel.ni.com/content/docs/DOC-22790 this is the best i have managed to find ( they do implement SLAM for this) 
    http://www.ros.org/wiki/gmapping

  • How to create editable ALV grid/list

    Hi,
    I want to create editable ALV grid/list so that user can modify the data in the ALV.
    And when user presses save button data will get saved in Z table.
    I dont know how to create editable ALV so could anybody please help me regarding this?
    Thanks & regards,
    Sameer Dhuke

    HI
    check the demo programs BCALV_FULLSCREEN_GRID_EDIT
    BCALV_GRID_EDIT
    BCALV_TEST_GRID_EDIT_01
    BCALV_TEST_GRID_EDITABLE
    REUSE_ALV_GRID EDITABLE
    ALV Grid editable fields
    Just to make things a bit easy
    In the layout,there is a property called edit, make it 'X' for the particular field whichever you want to make editable.
    Hope this helps,
    Suruchi
    Message was edited by:
            Suruchi Mahajan

  • How to create inconsistent numbered list style?

    Can I create paragagraph style with inconsistent numbered list in InDesign CS4? I created a style with numbered list but when I apply it to the second list on another page of my document list numbering continues from last number of previous list (in consecutive order). What's up? I want to get the same effect as in Microsoft Word.

    Yesterday I created new discussion on topic of numbered list style.
    Then I found out about Restart numbering not working for numbered lists created w/ paragraph style one and began to experiment.
    I would like numbered lists to begin with #1 by means of style as on this page.
    I did it using Numbered List on the Control Panel. It does what I want.
    vzdljfh
    zsdlfkhc
    zsdfljg
    FSLjg
    sdkfugiaufos oieytroi stup pdi7 oeutp  9ue9tueopiti
    estiyoas9tuoe[au[topw[9 p uwepta[owru
    ueytaoiuetp9yeapotuyhopa
    lzsdrhfaio
    aseuyrfoi
    liayf
    hliughoudg
    I’ve created numbered list style (body text) that has no number at LEVEL 1 and use that to restart the numbering (see 2 JPG)
    Secondly, I’ve also created the Numbered List style as Dominic Hurley advises:
    This is result (see 3 JPG):
    And this is the final result of my work (see 4 JPG):
    1, 2 -7, 8, 9, 10, 11, 12 -18
    It is still all Greek to me.
    Please help me to understand this. What am I doing wrong????

  • How to create a 3D grid in java 3D?

    How can i create a grid which is 3 dimensional in java3d?
    Is there any classes to create grids in java3d?
    if anybody knows,please let me know.....

    You could try a grid of Box shapes, textured with a texture that has a line around the edge, and is transparant in the middle.
    or a Box rendered with line attributes.
    (See: http://www.tecgraf.puc-rio.br/~ismael/Cursos/Cidade_CG/labs/Java3D/Java3D_onlinebook_selman/Htmls/3DJava_Ch09.htm#9-3 )
    It's becoming very clear to me that if you want to do any drawing within a 3D Scene with Java3d, you should find a way to do it via 3D Rendering.

  • How to create dynamic numbering in report?

    Hi all,
    Can we generate a dynamic numbering of records that appear on
    report depending how many record queried? For example if the
    query return 5 records than we will add the number from 1 to 5
    at the beginning of the record. If 8 records returned then it
    will be 1 to 8.
    like
    1. <record1>
    2. <record2>
    3. ....
    I think this feature is (should) existed in report. Any help is
    greatly appreciated.

    Hi,
    you can have the Summary column in that group . Give the function
    as count and source as the Primary key of that table.
    Draw the layout . It will work..
    Hope this Helps :-)))

  • How to Create Personnel Numbers in SAP?

    Hi All,
    Hope you're well. Sorry to bother you,
    I am currently working as SAP support in FI/CO and 1 of my tasks is to create personal No's for staff so when an expense invoice is being posted into FI, the AP clark could have the option of filling the Personnal No for an employee so we could then run a report to show all journeys/expenses the employee has taken.
    Could somebody please explain to me in detail what steps I must do to create a Personnel No and use it on an expense invoice.
    Could you kindly help me by explaining the steps I need to take from the start. Including Tranaction Codes if possible.
    Your help is much appriciated,
    Many thanks in advance
    Alex

    Hello
    I hope for you that all it is customized.
    The good way it is to create by PA30 and after to create the vendor view by PRAA.
    Your question is not very clear to answer with the good sentences.
    So could you precise if the HR is customized, and it is how use the standard transaction to create a personnal number.
    Or your need is it to do this customizing ? I have some document to do it but there is in french.
    Best regards
    Philippe

  • How to Create Personnel Numbers in FI?

    Hi All,
    Hope you're well.  Sorry to bother you,
    I am currently working as SAP support in FI/CO and 1 of my tasks is to create personal No's for staff so when an expense invoice is being posted into FI, the AP clark could have the option of filling the Personnal No for an employee so we could then run a report to show all journeys/expenses the employee has taken.
    I have my own number range which I would like to use.  Also all employees have vendor accounts opened under there names.
    I would need to create a vendor range for employees or do I just use the preivious employee numbers?
    Could you kindly help me by explaining the steps I need to take from the start.  Including Tranaction Codes if possible.
    Your help is much appriciated,
    Many thanks in advance
    Alex

    Hi,
    Personnel numbers are created in HR module of SAP and to supplement the expense related postings we create employee vendors in FI module.
    To make this happen we should use the transaction PRAA which automatically copies the HR master data from HR tables and fills it up in the employee vendor master record.
    However the program only copies client level data, that is, name address and all.
    The company code level data still needs to be updated in the employee vendor master record. This data comes from the reference vendor which you need to mention in the PRAA selection screen.
    When you execute the program PRAA for creating employee vendors for the selected Personnel Numbers, the program copies recon accounts, payment terms, house bank etc froom the reference vendor.
    For using PRAA transaction, the following details must be filled up in the corresponding HR master record:-
    1.) Actions (Infotype 0000)
    2.) Organizational Assignment (Infotype 0001)
    3.) Personal Data (Infotype 0002)
    4.) Permanent Residence (Infotype 0006 Subtype 1)
    5.) Bank Details (Infotype 0009 Subtype 0 or 2)
    If these are not present, the program will give you an error and tell you what information is actually missing.
    Now regarding the number range, you should create a separate account group for employee vendors and assign a number range to it.
    If you want the personnel no=vendor number then you will have to make the number range as external and adjust the user exit routing 'SET_VENDOR_NO_BY_USER' (in include RPRAPAEX_001).
    Please read the PRAA documentation (which is given in the blue coloured "i" button on the PRAA screen next to execute button).
    Using PRAA also helps in cases where exmployee is getting transferred from one company code to another. It gives better control to the system.
    You should avoid using FK01 and XK01 for creating employee vendors.
    Best of luck,
    Nitish

  • How to create automatically numbered chapters?

    If I write a number of chapters and then wish to delete or add some in the middle, the numbers above them will get out of order. It would be fantastic to be able to create a list style that numbers the chapters automatically like in a numbered list, but with a number being above and a block of text below. Is something like this:
    I
    Eset eiusmod tempor incidunt et labore et dolore magna aliquam. Ut enim ad minim veniam, quis nostrud exerc. Irure dolor in reprehend incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
    II
    Duis aute irure dolor in reprehenderit in voluptate velit esse molestaie cillum. Tia non ob ea soluad incommod quae egen ium improb fugiend. Officia deserunt mollit anim id est laborum Et harumd dereud facilis est er expedit distinct.
    III
    Nam liber te conscient to factor tum poen legum odioque civiuda et tam. Neque pecun modut est neque nonor et imper ned libidig met, consectetur adipiscing elit, sed ut labore et dolore magna aliquam is nostrud exercitation ullam mmodo consequet.
    ...possible to automate?
    Obliged

    Refer to metalink note 986667.1 - GL Company Cost Center White Paper

  • How to create build numbers?

    Is it possible to increase a build number on every compilation and use this number in the application, so that the application can print:
    System.out.println("Version: "+version+" (build: "+build+")");
    Through development, the version number is not increased, but we would like to have at least one unique ID to identifiy the compilation version/build.

    As part of your build process, you could use a script like #!/bin/sh
    // Generate a suitable java file.
    cat VersionHeader.j countFile VersionFooter.j >Version.java
    echo `cat countFile` + 1 | bc >countFile.new
    mv countFile.new countFileThe header and footer are respectively // VersionHeader.j
    public interface Version
        public static final int versionNumber = /*VersionFooter.j*/;
    }

  • Create sequential numbering for chapters in Pages

    Can anyone tell me how to create sequential numbering for my 'scenes' or 'chapters' when writing scripts in Pages.
    I need to have them set up, so if for example, I have...
    Scene 01
    Scene 02
    Scene 03
    and down through scenes to say...
    Scene 52
    But I write another new scene in between scene 02 and 03... I need all the other scne numbers to change automatically below the new scene, instead of me having to manually go through and change every single scene number...
    How do I do this?

    Thanks... this is a reasonable compromise, which I have already done.
    The problem with script writing is that the Scenes are generally headed like this...
    Scene 22: Int - Dinning room - Night
    Then they might have a subtitle, which is a short descriptive of the scene, such as...
    Scene 22: Int - Dinning room - Night
    (Xmas Turkey dilemma)
    So, it could work as you suggest, but it is by far a perfect formula, I am dumbfounded as to why 'Pages' doesn't have this simple function, when just about every other word processing program does. Final Draft is an industry standard for script writing, but I actually prefer Pages, I have a lot more creative control with formatting, except for this one vital function... darn!
    Thanks for you suggestion Peter,
    Cheers

  • How to create a pulldown list in numbers

    how to create a pulldown list in numbers

    Here is it:
    Open Applescript editor
    Copy the entire script and paste it into Applescript Editor
    Compile it
    Read the instructions at the top of the script
    Run the script, following the instructions.
    You can save the script and it will be available in the Scripts menu (on the right side of the menu bar where Time Machine , Airport, and all those icons are).
    Copy and paste all of what is below:
    -- Script to populate a Numbers pop-up list.
    -- Instructions:
    --                    GUI scripting must be on in System Preferences
    --                    Create a list of items. Must be a contiguous range of cells in a table.
    --                    Select the range of cells to use as items in the popup.
    --                    Run the script. 
    --                    A dialog box will appear asking you to select which cells you want to turn into pop-ups
    --                    Select the cells then click OK on the dialog box
    set tValues to my doThis(1) -- get values of the selection
    if tValues is not "" then
      activate
              display dialog "Select the cells where you want to create the PopUp." & return & "After that, click on the 'OK' button."
              my doThis(tValues) -- set the cell format of the new selection to "PopUp Menu" and set the values of the each menu item
              tell application "Numbers" to display dialog "Done"
    else
              tell application "Numbers" to display dialog "You must select the cells in a table before running this script."
    end if
    on doThis(n)
              tell application "Numbers"
                        set tTables to (tables of sheets of front document whose its selection range is not missing value)
                        repeat with t in tTables -- t is a list of tables of a sheet
                                  if contents of t is not {} then -- this list is not empty, it's the selected sheet
                                            set activeTable to (get item 1 of t)
                                            if n = 1 then return value of cells of selection range of activeTable -- return values of the selection
                                            set format of (cells of selection range of activeTable) to pop up menu -- set the format to pop up menu
                                            return my setValuePopUp(n) -- set value of each menu item
                                  end if
                        end repeat
              end tell
              return ""
    end doThis
    on setValuePopUp(L)
              tell application "System Events"
                        tell process "Numbers"
                                  set frontmost to true
                                  delay 0.3
                                  set inspectorWindow to missing value
                                  set tWindows to windows whose subrole is "AXFloatingWindow"
                                  repeat with i in tWindows
                                            if exists radio group 1 of i then
                                                      set inspectorWindow to i
                                                      exit repeat
                                            end if
                                  end repeat
                                  if inspectorWindow is missing value then
      keystroke "i" using {option down, command down} -- Show Inspector
                                  else
      perform action "AXRaise" of inspectorWindow -- raise the Inspector window to the front
                                  end if
                                  delay 0.3
                                  tell window 1
      click radio button 4 of radio group 1 -- the "cell format" tab
                                            delay 0.3
                                            tell group 2 of group 1
                                                      set tTable to table 1 of scroll area 1
                                                      set tc to count rows of tTable
                                                      set lenL to (count L)
                                                      if tc < lenL then -- ** add menu items **
                                                                repeat until (count rows of tTable) = lenL
      click button 1 -- button [+]
                                                                end repeat
      keystroke return -- validate the default name of the last menu item
                                                      else if tc > lenL then -- ** remove menu items **
                                                                repeat while exists row (lenL + 1) of tTable
                                                                          select row (lenL + 1) of tTable
      click button 2 --  button [-]
                                                                end repeat
                                                      end if
                                                      tell tTable to repeat with i from 1 to lenL -- ** change value of each menu item **
                                                                set value of text field 1 of row i to item i of L
                                                      end repeat
                                            end tell
                                  end tell
                        end tell
              end tell
    end setValuePopUp

  • How to create a clickable hyperlink in iCloud Numbers?

    How to create a clickable hyperlink in iCloud Numbers?

    There is no such thing. All you could do is create an HTML e-mail, but many users won't even view it in that mode for security reasons and it may get filtered. Similarly, Flash-based content may get removed/ not show up. So at best, if you really want to get a clickable document, you could use a PDF file containing a link. but did i mention that the user can suppress those, too? Well, sorry, but you are SOL. You want something that for a million reasons nobodyy can give you. The best you can do, as always, is host your content on a proper website and send peopel a link to it...
    Mylenium

  • How to create and assign a help document to INFO button on ALV grid

    Hi All,
    Can somebody tell me how to create an 'END USER DOCUMENTATION' document and the 'FUNCTION MODULE' to call it and display in the form of F1 help screen.
    OR
    Is there any standard method to call & display a help document, when the user clicks the INFO(i) button on the ALV grid standard toolbar?
    Thanks in advance.
    Rkumar

    Hello Rkumar
    If you have defined a documentation for your ALV report which you want to display when the INFO button is pushed you can use the following coding:
    CALL FUNCTION 'DSYS_SHOW_FOR_F1HELP'           
        EXPORTING                                  
             DOKCLASS           = 'RE'                                          " = report
             DOKNAME            = '<name of your ALV report>'
             SHORT_TEXT         = 'X'              
        EXCEPTIONS                                 
             OTHERS             = 1.     
    Regards
      Uwe

Maybe you are looking for