How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?
How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,
How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,
Similar Messages
-
How to create an unsolved cube with awm???
hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/ -
How to create multiprovider in BI 7.0 using two cubes
Hi all,
how to create multiprovider in BI 7.0 using two cubes?Go to the infoarea you want and right click and click create a Multiprovider.
In the deifiniton of MP, choos ethe two infocubes you want to add and continue.
Choose the dimensions you want to include in your MP.
Add the characteristics you want to include in the dimensions.
Add key figures.
Then identify which cube the characateristics and keyfigures should come from and activate.
search the forums also. -
How to create a transactional cube
Hi all,
How to create a transactional cube. Can anyone tell me the process involved in creating transactional cube.
thanxs in advance
hariHi hari,
Transactional cube creation is similar to the creation of ur basic cube but at the time of loading u have to chack up an option
1.Go to Infoproviders tree right click Info area and say Create infocube.
2.then the normal way of creating infosource,assigning source sytem to itand then creating infopackage should be done
3.But befor scheduling the info package go the info provider tree select the infocube u have create and just right click u'll find an option
Swith Transactional infocube click it then a pop upshows with 2 radiobuttions
1.Real time data target can be loaded with data,Planning not allowed check this radiobutton
2.real time data target can be planned,data loading not allowed
4.now u can go back to ur infopackage and schedule it.
Regards
Madhavi -
How to create Support function for internal Class use
I have created a class to find the MoonRise and Set time. There is a java code available and I am translating it to Obj-C.
My problem is that for the calculation there are many support functions which is internally used. When I try to duplicate this as follows
-(double) frac:(double)x {
// returns the fractional part of x as used in minimoon and minisun
double a;
a = x - floor(x);
if (a < 0) a += 1;
return a;
-(void)minimoon:(double)t {
// takes t and returns the geocentric ra and dec in an array mooneq
// claimed good to 5' (angle) in ra and 1' in dec
// tallies with another approximate method and with ICE for a couple of dates
double L0, L, LS, F, D, H, S, N, DL, CB, L_moon, B_moon, V, W, X, Y, Z, RHO;
//var mooneq = new Array;
L0 = frac(0.606433 + 1336.855225 * t); // mean longitude of moon
At this point it gives an error implicit declaration of function frac,
My question is how to create such helper functions which are used internally, actually there are many such functions where functionA call B which calls C.
Thanks
RajHere's yet another approach (creating a private category):
@interface MYClass (Private)
- (double)frac:(double)x;
@end
@implementation MYClass
- (void)minimoon:(double)t {
// takes t and returns the geocentric ra and dec in an array mooneq
// claimed good to 5' (angle) in ra and 1' in dec
// tallies with another approximate method and with ICE for a couple of dates
double L0, L, LS, F, D, H, S, N, DL, CB, L_moon, B_moon, V, W, X, Y, Z, RHO;
//var mooneq = new Array;
L0 = [self frac:(0.606433 + 1336.855225 * t)]; // mean longitude of moon
- (double)frac:(double)x
// returns the fractional part of x as used in minimoon and minisun
double a;
a = x - floor(x);
if (a < 0) a += 1;
return a;
@end
<div class="jive-quote">rajkhand wrote:
I liked the first method as I don't have to change much of the java code.
I like it too. I use that very regularly (though I often use C++/Objective C++), since there is typically a lot of implementation in any class that does not need to be an ObjC instance method. This approach helps to reduce the object's interface to its essentials while keeping maintenance low.
I'll put all the helper functions above the implementation.
Is there a good book/web site where I can get such insight? I know C and Delphi/pascal
Well, Objective-C is a superset of C. If you're porting Java, you'll find protocols (ObjC) similar to interfaces (Java).
*Getting Started*
Apple's version of ObjC is different from others. For the language, Apple's docs are the standard (IMO):
Language:
http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/ObjC.pdf
If you are comfortable with C, this guide will help learning Objective-C quickly, though it has not been updated for (Apple's) Objective-C 2.0:
http://www.amazon.com/Objective-C-Pocket-Reference-Andrew-Duncan/dp/0596004230/r ef=sr14?ie=UTF8&s=books&qid=1245404236&sr=8-4
There are a few books on the ObjC2 language, but I have not read them (I just read Apple's docs for this).
OOP/Design:
http://developer.apple.com/documentation/Cocoa/Conceptual/OOPObjC/OOPObjC.pdf
Research
Good site for archives of tips, tricks, and even some hacks:
http://www.cocoadev.com/
Apple's lists (Cocoa, Xcode, ObjC, and specific technologies):
http://lists.apple.com/mailman/listinfo
This one sees the most traffic for Cocoa, and ObjC topics :
http://lists.apple.com/mailman/listinfo/cocoa-dev
Online archive for aforementioned Xcode and Cocoa list submissions:
http://www.cocoabuilder.com/
There are a lot of good sites/blogs out there as well.
Questions
Apple's lists (linked above) will typically yield good answers in a short time, you can also try here.
Thanks a million
Raj
You're Welcome,
J -
How to create a user in UME Database using web dynpro java custom application
Hi,
Can you please suggest me how to create a user in UME Database using web dynpro java custom application.
My Requirement is user can register his/her user id in SAP Portal 7.3 UME database.
Please suggest me.
Thanks and Regards,
AmitHi Amit,
Generated Documentation (Untitled)
This is what you're looking for, there's no real cook-book -- though Amey mentioned there might be some material on SDN, perhaps some tutorials.
You should be looking into com.sap.security.api.IUserFactory, methods newUser(String) which gives you and IUserMaint and commitUser(IUserMaint, IUserAccount) -- IUserAccount can be obtained using com.sap.security.api.IUserAccountFactory, method newUserAccount(String)
Hope it helps,
D. -
How to create a muli line text area using JavaFx
Hi all,
Since the preview SDK does not contain TextArea any more, I am wondering how to create a muli line text area using JavaFX. The behaviour of this text area/field should be somehow similar to JTextArea in Swing or StyledTextWidget in SWT.
Does JavaFX have any support for this? What would be a sensible approach to create such a widget?
Thanks for your suggestions,
br michaelThis is a pretty old thread (I know I came across this while searching for something similar recently), but I figured I'd throw this out there in case other people might find this useful. As I write this, JavaFX's latest version is 1.3... which may have added the needed functionality since the last post.
You can now create a multi-line text area using a TextBox and by specifying the nubmer of lines and setting the "multiline" value to true. It may not offer all of the same functionality as JTextArea, but it did the job for what I needed... newlines by pressing enter, scrollbar if text surpasses height, etc.
Here's a simple example:
Group {
content: [
TextBox {
text: "This is a multi-line textbox"
lines: 10 // <-- this may/may not be necessary depending on your situation. Default is 5.
multiline: true
}Edited by: loeschg on Jul 29, 2010 2:59 PM -
How to create a table with datatype blob and insert a pdf file (ravi)
how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you. -
How to create a local SLD on a newly installed PI 7.3 system.
Hello
I wander how to create a local SLD on a newly installed PI 7.3 system.
When installing I choosed "register in existing central SLD"(other option was "no SLD destination")
On next screen I have choosen SLD HTTP host as the host I was currently installing PI7.3
For SLD HTTP port I have used 50000 as the instance was (the default) "00"
For SLD Data Supplier User I have choosen "SLDDSUSER"
I was warned then that "The SLD Server is not reachable. Choose "Cancell" to modify managing configuration or "OK" to continue. If you choose to continue you will have to execute the smdsetup script later on."
I opted "OK".
if I understand I have to execute smdsetup script in order to create a local SLD
Has anyone experience with it
thank you in advace
JanHi Jan,
You first need to run the wizard to setup the SLD locally.
To do this, go to the NetWeaver Administrator -> Configuration -> Scenarios -> Configuration Wizard -> Funtional Wizard Configuration UI
There tick System Landscape Directory and select "Enable Automatically".
After executing this, your SLD will be ready for use.
The SMD has nothing to do with the SLD, it's just the next step in the installation process.
Kind regards,
Mark -
How to create Billing Plan in sales order using Function module /BAPI
hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay -
How to create a partner and header record using CRM_ORDER_MAINTAIN?
Hi any one knows how to create a partner and header record using the function module CRM_ORDER_MAINTAIN??
I tried to create a record, but i only managed to create a header record and the partner record is not reflected in the transaction. Why is that so? is there any indicator that i need to include?
Thanks..
JenHi Jen!
I use this FM and it works perfectly.
Use this to create a partner:
gs_partner-ref_handle = '0000000001'.
gs_partner-ref_kind = 'A'.
gs_partner-ref_partner_handle = '0001'.
gs_partner-partner_fct = '00000001'.
gs_partner-partner_no = NO_PARTNER. "number of the partner, bu_partner
gs_partner-display_type = 'BP'.
gs_partner-no_type = 'BP'.
gs_partner-kind_of_entry = 'C'.
* ls_partner_l-ref_handle = '1'.
gs_partner-ref_guid = '00000000000000000000000000000000'.
APPEND gs_partner TO gT_partner .
ls_input_field-ref_kind = 'A'.
ls_input_field-logical_key = '0001'.
ls_input_field-objectname = 'PARTNER'.
ls_input_field-ref_handle = '0000000001'.
ls_input_field_names-fieldname = 'DISPLAY_TYPE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
ls_input_field_names-fieldname = 'KIND_OF_ENTRY'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
ls_input_field_names-fieldname = 'NO_TYPE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
ls_input_field_names-fieldname = 'PARTNER_FCT'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
ls_input_field_names-fieldname = 'PARTNER_NO'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE gt_input_fields.
clear ls_input_field-field_names[].
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
* it_schedlin_i = gt_schedlin_i_com
it_partner = gt_partner
* it_sales = gt_sales
* it_orgman = gt_orgman
* it_appointment = gt_appointment
* it_ordprp_i = gt_ordprp_i
* it_product_i = gt_product_i
* it_activity_i = gt_activity_i
* it_pridoc = gt_pridoc_com
CHANGING
ct_orderadm_h = gt_orderadm_h
* ct_orderadm_i = gt_orderadm_i
ct_input_fields = gt_input_fields.
* ct_doc_flow = gt_doc_flow
* cv_log_handle = gv_log_handle.
Hope it helps u,
Regards,
Mon. -
How to create a datasource for 0COSTCENTER to load data in csv file in BI
how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allenStep 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya -
How to create an instance for RemoteSession without using create() method
How to create an instance for RemoteSession without using create() method?
What's RemoteSession? Not in the JDK. And does the question have anything to do with concurrency?
-
How to Create Test Sequence Document in HTML using command line
How to Create Test Sequence Document in HTML using command line
I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using C# .NetIf you aren't able to figure out how to call a C++ DLL in .net then there may be another option. Unfortunately I don't know how to do this off the top of my head and I don't have an example.
The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options. Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~ -
How to create dynamic connection string with variables using ssis.
Hello,
Can anyone let me know on how to create dynamic connection string with variables using ssis?
Any help would be appreciated.Hi vinay9738,
According to your description, you want to connect multiple database from multiple servers using dynamic connection.
If in this case, we can create a Table in our local database (whatever DB we want) and load all the connection strings. We can use Execute SQL Task to query all the connection strings and store the result-set in a variable of object type in SSIS package.
Then use ForEach Loop container to shred the content of the object variable and iterate through each of the connection strings. And then Place an Execute SQL task inside ForEach Loop container with the SQL statements we have to run in all the DB instances.
For more details, please refer to the following blog:
http://sql-developers.blogspot.kr/2010/07/dynamic-database-connection-using-ssis.html
If there are any other questions, please feel free to let me know.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
How to edit a video that has already been exported?
I have a video which was exported, however I would like to go back and edit some things. When I open FCPX, I am unable to find the video file at all, and the only way I can even see it in the program is by importing the already exported file. Obvious
-
Blank row added after cancel button on create page
Hi All, I have a create item page where I insert items into the item table in the database. On press of the cancel button on this create page, the control reaches a itemlist page with my old search criteria and result but with a new blank row added t
-
How do i get the answers to my security questions if i forgot them?
How do i get the answers to my security questions if i forgot them?
-
Depreciation planned calculater not as remaining life balance
Hi SAP Expert, Currently, i have an issue on depreciation planned calculate divided by 12 month instead of 2 month remaining life balance. Asset Parameters Useful Life: 3 / 0 Expired Useful Life: 2 / 10 Remaining Life: 0 / 2 Net book value balance is
-
Hello, I'm having a problem detecting automatic time zone on a macbook air. If i set location detection on automatic it detects it in Moskow- Russia and it's about 900 kilometers from my current location (Toila-Estonia). It's i big problem, because n