How to create a par file that includes an image and a .swf file

Hi everyone,
I have a requirement to create a <b>.par file which will contain a .swf file and a .gif file</b>.
Can anyone please tell me the steps to do so.
Thanks in advance

Thanks Ranjeet for the quick reply.
I have created a portal project and placed the .swf file and the .gif file in the images folder and deployed it to the server. I downloaded the .par file and chked that it contained the .swf and .gif files. But when i run the application it <b>does not show me the .swf file</b> . An icon with a cross mark appears instead. I have flash player installed on my PC .The .gif file when run works fine but not the .swf file.
Can anyone tell me a workaround for this ?

Similar Messages

  • Is it possible to create a horizontal slider that includes both text and pictures?

    I need to create a horizontal slider that includes both an image and selectable text, but I can't seem to figure out how to go about this in Muse. So far all I have been able to do is to use the Image description as the static text, but this text will not slide horizontally, it will just change, and the picture will slide underneath it.
    I want both the picture of the phone, AND the text next to it to slide horizontally when the user clicks the next/previous buttons. The placement of the text needs to change depending on which message will be in the next slide, so it will be impossible to use the image description for this purpose.

    Thanks for posting.
    You can achieve this by using slid show. Add image to the slide and there is a text box at the bottom of the slideshow box, which you can drag and place on the image within the frame. Please refer the screenshot below.
    Kind Regards
    Aishvarya Rastogi

  • My hardrive just got diagnosed as 'faulty' even though its only 1year8months old!!! I had adobe bridge installed on the computer with many picture files that included raw images. How can I get these raw files back after computer died?

    computer did not start up one day. it was a white screen
    took it to a mac bar and they said the diagnosis was a faulty hard drive
    I had backed up most of my images ( i am a photographer)
    had not backed up atleast 6 files full of raw images!!!!
    they suggested sending it to a data recovery specialist which would cost around $500!
    I am not getting the answers I need on how, why, or what is going to be recovered or if raw picture files will be able to be saved.
    Not sure what to do next because I dont have loads of extra money laying around to pay for something that should have not occured in the first place if I was actually sold a good computer.
    payed $1095 for this imac and it only lasted just under 2 years. I feel cheated and scammed! Has any one else gone through this same thing?? what did you do?

    If it is only 20 months old it is still covered by the 3-year Applecare.
    You did take out Applecare didn't you?
    I had backed up most of my images ( i am a photographer)
    had not backed up atleast 6 files full of raw images!!!!
    Why did you, as a photographer, not make several backups, not just one or a partial one, of your material?

  • How to create a PDF page that displays in Email and contains links to a page in the full PDF.

    Mac, CS 5
    I was able to create the PDF page and activate links to pages in the full PDF document. But when I test-email both files to myself, the links do not work.

    You have created links between two PDFs while they were regular disk-based files (I assume using the 'open a file' link action). When they're both attachments to an email message they are no longer in any meaningful 'location'. Some mail clients will extract all the attachments in a message into a temporary cache folder, so they do end up being able to see one another; but others will open each attachment on demand and prevent them from accessing anything else. Attachments are a huge security risk and sandboxing them is always best practice - the result of which is that lots of PDF functions just don't work.

  • How to create a desktop shortcut that includes UserID and Password

    I would like to know how to add my User ID and Password to allow seamless login to a site by using the userid and password
    I have an existing shortcut and would like FF to open and login to the site with one "double-click"
    I do appreciate that it is a security risk to do this, but the information on this site poses no risk for me if someone that has authorized access to my personal computer, click on this shortcut.
    I will appreciate any help to assist me in doing this.
    Kind Regards
    Frits

    iamjayakumars,
    Thanks for the advice, but the website does not give the option to save the password, hence my question
    Any other way I can perhaps in the properties specify that?

  • How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

    Hi, this question has been answered for 2013. The answer here suggests that it can be done in  2010.
    See:
    http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
    Who knows how?
    Regards
    Sander

    Hi Sander,
    As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • How to create a PAR file from EAR file

    Hi,
       I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
    How to access the EAR file in NWDS or J2EE ?
    Thanks in Advance ,
    By
    Saravanan

    Hi,
    To create a iview,
    log on to portal, New iView and select SAP webdynpro iview.
    It will ask for namespace which is usually , local/Project Name
    and application name is the name of the application.
    We dont have to create par file for this requirement

  • How to create a PAR file in Web Dynpro

    Hi !!
    Could any one tell me how to create a par file of the java application developed in WebDynpro..
    thanks
    ChandraSekar Maheswaran

    Hi,
    Refer the link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/a-c/creating%20your%20first%20web%20dynpro%20application.pdf
    Webdynpro concepts
    Regards,
    Tamil K

  • I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

    I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

    Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
    Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
    Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
    tt2

  • How do I change a document that I have saved as a PDF file in Documents? I can get it to OPEN but can't do anything to it.

    How do I change a document that I have saved as a PDF file in Documents........I can open it but can't do anything with it.

    A PDF is really an electronic print of your document & is not intended for future editing. You should always save a copy of the original document in the program that created it & use that for edits. You can then export or print the revised document to PDF, again saving the original.

  • I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
    If that solution is not flexible enough, consider using the very affordable (12$)  Elements+ add-on which offers a 'meta stamp' script :
    http://elementsplus.net/v5/en/meta-stamp.htm
    Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

  • How do I send a file that is 2 mb via adobe send file now. I have the student version of cs 6

    How do I send a file that is 2 mb via adobe send file now. I have the student version of cs 6. Does this cost money, or can I send a certain size for free. I just want to send a file so I can access it on my ipad. It's a PDF that is too large to email.

    Adobe Send can certainly do that.
    Or you can do it manually:
    upload the file to Acrobat.com
    check the file on the Acrobat.com site and click Send
    use Create Anonymous Link and click the Create Link button
    copy the created download link and send it by email

  • How to create a standard report that allows filtering?

    Hi Guys and Gals,
    Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    Allowing the user to specify the number of rows displayed would be peachy-keen too.
    Thanks,
    Kim
    P.S. I'm running Apex 4.1 with Oracle 11g.

    Kim2012 wrote:
    Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
    create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
    >
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    >
    Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
    More good advice: Re: Newbie question-how does the tabular form work?  How to populate prim key? and&mdash;if based on decent database design&mdash;out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app.

  • TS3173 i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help

    i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select your OS X disk.
      5. Click on the arrow button below the icon.

  • How to create an infinite loop that cannot be cancelled?

    Hi , im new around java and i need a program that keeps on repeating after each each input/uses(generally meant for different user) and cannot either stop using "Cancel" or "x" while stopping only using the "stop" button
    I got a few lines of codes that look like this : String arg = "";
    do{
    JOptionPane.showInputDialog("hi");
    }while ( arg != "y" || arg!= "Y");
    and it cannot be stop with both cancel and"x"(which i wanted)
    but when i used this logic with
    Valid validUserInput = new Valid();
    do {
    userInput = validUserInput.validUserInput(a);
    switch(userInput){
    case 1 : validUserInput.optionOne(b);break;
    case 2 : validUserInput.optionTwo(c);break;
    case 3 : validUserInput.optionThree(d,e);break;
    default : validUserInput.validUserInput(f);
    }while(looping != "" || looping != " ");
    it does not really work(while it will keep looping, it can be easily stop by pressing cancelled or "x")
    So is there any logic or method that can prevent the program from being stop?
    Thankyou!

    elricscript wrote:
    "That is helpful. It gives him a direction where he can focus his research. Namely, 'how to run a program in kiosk mode' rather than 'how to create an infinite loop that cannot be cancelled.'"
    No... He already mentioned he wants to "e.g Interactive kiosk", so saying "properly kiosk it" isn't adding any new information. Rather it's just giving the person a dead point of: you're doing it wrong. Pointing out someone is wrong is not a positive enlightenment. Pointing someone in the right direction is more productive.
    >"That is helpful. It gives him a direction where he can focus his research. Namely, 'how to run a program in kiosk mode' rather than 'how to create an infinite loop that cannot be cancelled.'"
    No... He already mentioned he wants to "e.g Interactive kiosk", so saying "properly kiosk it" isn't adding any new information.
    Yes it is. He asked how to do it using some Swing trickery, and I said it won't work. Which is true. The OP didn't already know that, clearly, hence the question. Now he does. That's pretty much new information if you ask me.
    Rather it's just giving the person a dead point of: you're doing it wrong.Right. He is. However, the problem is now no longer related to Java, and not something I can help him with. You should try that: not answering questions you don't know the answer to. It's actually more helpful than posting misleading, wrong answers.
    Pointing out someone is wrong is not a positive enlightenment. I'm giving basic technical help, not yoga lessons.
    Pointing someone in the right direction is more productive.As already stated, I am as ignorant of how to make a Java application into a kiosk app as the OP is. What value can I add in light of that information? I began by answering a question that was not stated to be about kiosks. Once the question moved outside of my area of knowledge, I stopped trying to answer.
    I notice you're not giving him any help, being more interested in admonishing others as you are.

Maybe you are looking for