How to create a parmetarized user query

Hi all
i want to create a user query with parameters so that when activated the user will have to fill those parmeters.
question is how do i create these parameters by code?
appreciate the help
Yoav

Hi Yoav,
If you are running a query from within Query Generator then you can use the [%0], [%1] etc syntax and SBO will prompt the user when the query is run. If you are going to execute a query through code then you could create a little user form that contains fields for each of the parameters (ie write your own parameter window) and then run the query based on the values the user enters in your form.
Kind Regards,
Owen

Similar Messages

  • How to create a new user account?

    Hi,
    Could you point me to the document/maunal on
    how to create a new user account for OS X 10.4?
    I somehow couldn't find that from Apple web site.
    And I found one here:
    http://www.mcelhearn.com/article.php?story=2004110211244242
    and followed the instruction:
    # echo 'henry::512:512::0:0:Henry James:/Users/henry:/bin/bash' | sudo niload -v passwd /
    but nothing happened. Either this doesn't work with
    V10.4 (which I use), or I missed something.
    Any pointer would be much apprecaited.
    Thanks.
    Macbook Pro   Mac OS X (10.4)  

    Hi Allan and Simon,
    Thanks for your responses.
    Sorry I didn't make my question clear. I meant:
    "How to create a new user account with command line"?
    The GUI (System Preference) would work. But I'd like
    to how to do it from command line (just like on Unix).
    Any inputs would be appreciated.
    Thank you.
    Macbook Pro Mac OS X (10.4)
    Macbook Pro Mac OS X (10.4)

  • How to create a new user over HTTPS

    Hi. I have set up conf.xml and web.xml so that when the user accesses a page in the secure area of the website, then they are taken to a login page where they enter their username and password and the form calls j_security_check on the server. All this happens over SSL as the transport garauntee is CONFIDENTIAL. But how to create a new user over HTTPS? If I have a create new account pages in the secure area of the website, then the only way the user can access these pages is by logging in, but they don't have a login as yet.

    An update. It looks that if the auth-constraint section (which lists the roles that can access this area) is missing, then everyone can access the region and it is over HTTPS. So far, the following seems to be working
       <security-constraint>
          <display-name>View My Account</display-name>
          <web-resource-collection>
             <web-resource-name>My Account Area</web-resource-name>
             <url-pattern>/myaccount/*</url-pattern>
          </web-resource-collection>
          <auth-constraint>
             <role-name>myrole</role-name>
          </auth-constraint>
          <user-data-constraint>
             <transport-guarantee>CONFIDENTIAL</transport-guarantee>
          </user-data-constraint>
       </security-constraint>
       <login-config>
          <auth-method>FORM</auth-method>
          <realm-name>Form-Based Authentication Area</realm-name>
          <form-login-config>
             <form-login-page>/newaccount/login.html</form-login-page>
             <form-error-page>/newaccount/loginerr.html</form-error-page>
          </form-login-config>
       </login-config>
       <security-role>
          <role-name>myrole</role-name>
       </security-role>
       <security-constraint>
          <display-name>Create New Account</display-name>
          <web-resource-collection>
             <web-resource-name>New Account Area</web-resource-name>
             <url-pattern>/newaccount/*</url-pattern>
          </web-resource-collection>
          <user-data-constraint>
             <transport-guarantee>CONFIDENTIAL</transport-guarantee>
          </user-data-constraint>
       </security-constraint>

  • How to create a new User / Contact using APIs

    I am not able to figure out how to create a new User / Contact in WLPS using APIs
    . Is there a factory class ?
    Thanks,
    AJ

    Hi Bala,
    Try using these function modules
    SUSR_BAPI_USER_CREATE
    BAPI_USER_CREATE
    BAPI_USER_CREATE1
    BAPI_USER_INTERNET_CREATE ( This internally calls BAPI_USER_CREATE1)
    Please read the FM documentation for more information.

  • How to create a new user id in OID for Oracle Collab suite File System

    Dear Friends,
    I want to know how to create a new user id in the oracle internet directory where i can use that user for the new subscription of the oracle collabration suite file system..
    Please do the needfull and thanks in advance...
    With warm regards
    R.Prasad

    Hi!
    The way you suggest should not be used.
    A CS user will be created as a normal OID user and will receive the CS attributes in a different subtree later during the provisioning.
    For creating CS users use oesuser and uniuser. Files provisioning will work in a different manner anyway.
    cu
    Andreas

  • How to create/Map a User as Adminstrator in BPM Worklist to view all tasks

    Hi all,
    How to create/Map a User as Adminstrator in BPM Worklist to view all the tasks.
    Version :Jdev 11.1.1.1.0
    Regards
    C.Karukkuvel

    go to EM , right click on soa-infra -> security -> Applicaiton roles, then click on BPMWorkflowAdmin role. Add your user to this role.
    This user will be able to view all tasks in Worklist. you have to click on "Administration Tasks" tab.
    Thanks
    --Sreeny
    Edited by: sreeny on Sep 22, 2010 12:54 PM

  • How to create/Map a User as Adminstrator in BPM Worklist to view all the ta

    Hi all,
    How to create/Map a User as Adminstrator in BPM Worklist to view all the tasks.
    Version :Jdev 11.1.1.1.0
    Regards
    C.Karukkuvel

    Sounds like a great question for the [url http://forums.oracle.com/forums/forum.jspa?forumID=560]BPM Suite Forum, but then again, I see you've already posted the question there ;)
    Good luck,
    John

  • How to create search function (af:query) using method in java

    hi All..:)
    i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
    anyone help me....
    thx
    agungdmt

    Hi,
    download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
    Frank

  • How to create full new user with all privileges

    how to create full new user with all privileges?
    and how to delete existing users?
    Thanks in advance..

    Common solution is probably to use sudo for privilege elevation, wiki should help

  • How to create a reference user for B2C application?

    Hello,
    Can somebody please tell me how to create a reference user for B2C application?
    I am trying to create a new account on the B2C site. It is giving me a null pointer exception. I have not created a reference user for B2C application.
    Is there any documentation available to explain the steps required for this?
    Thanks,
    Harsha

    Hi Harsha,
    Please lookup http://help.sap.com/saphelp_crm40sr1/helpdata/en/be/511378ab1311d4b32b0050da4cccf0/frameset.htm for more information.
    Cheers,
    Ashok.

  • How to create ready only user ID in Oracle Apps(EBS) 11i

    Hi,
    We have a requirement of creating a ID in Oracle Apps 11i as a ready only user.
    Please suggest how to create read only user in Oracle Apps 11i ?
    Regards,
    chandrasekar s

    Is this for an application user or a database user ?
    See MOS Doc 1290228.1 for application user.
    This topic has been discussed many times in these forums - pl use the search feature
    https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=read+only&rankBy=relevance&contentType=a…
    HTH
    Srini

  • How to create authorization to access Query Print Layout?

    Hi again..
    i have 10 query print layout, and not every user can view this layout.
    I assume,
    report 1-3 only for user A,
    report 4-7 only for user B, and
    report 8-10 only for user C.
    How to create autorization for Query Print Layout?
    Thankyou for the help

    Dony,
    In order to createthe PL's of customize report (from Query Manager) you will have to go the Tools Tab of the Menu Bar in which you will have to click the Queries tab which will lead to a drop down menu which when clicked will lead to Quaery Print layout. You will have to choose your query based upon whether from the reports tab double click it to open the Query Print Layout Designer.
    Here again in the Menu Bar you will find the under the Tools the first tab is the PLD which when clicked you can do the same process as explined below
    When you go to the document ( Any Document ) in the tool bar you would find the 24th Icon to be the Print Layout Designer Tab when you click this it takes you to the layout designer window.... below there is tab named set as default when you click this the system would ask you 2 choices
    1. Set as default for all users
    2. Set as default for current user
    Which means that you will have to open each and every form?
    for each and every user and set them as default for the user.
    If you feel this answer is helpful then please do remember to reward points
    Regards,
    Nagesh.

  • How to Create/Modify/Delete a query view from the web template in BI 7.0

    All:
    In BW 3.5, the <b>Query Selection View</b>  web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
    The Query Selection View web item <u>does not</u> exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
    Can anyone share how to create,modify,save or delete a <b>query view</b> on the web in BI 7.0
    Thanks,
    Kumar

    Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

  • How to create a new user aaa with same rights as existing user bbb ?

    Assume user bbb already exists in Oracla 10g database.
    How can I create a new user aaa with the same rights/permissions as the old user bbb?
    Is this procedure/command also working if the old user is user "system" (=dbadmin)?

    There is some possibilty to generate a EXPDP dump file which contains only DDL statements related to account and
    privileges: EXCLUDE/INCLUDE parameter can help.
    For example, following EXPDP statements seem to work with SYSTEM account:
    expdp / schemas=system content=metadata_only exclude=table,sequence,package,function,procedure,synonym,,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
    Export: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:41:36
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Starting "OPS$XXX"."SYS_EXPORT_SCHEMA_01":  /******** schemas=system con
    tent=metadata_only exclude=table,sequence,package,function,procedure,synonym,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
    Processing object type SCHEMA_EXPORT/USER
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    Master table "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully loaded/unload
    ed
    Dump file set for OPS$XXX.SYS_EXPORT_SCHEMA_01 is:
      C:\TEMP\SYSTEM.DMP
    Job "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully completed at 09:41:41
    impdp / sqlfile=dpd:system.sql dumpfile=DPD:system.dmp logfile=DPD:system.logImport: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:42:46
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Master table "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully loaded/unload
    ed
    Starting "OPS$XXX"."SYS_SQL_FILE_FULL_05":  /******** sqlfile=dpd:system
    .sql dumpfile=DPD:system.dmp logfile=DPD:system.log
    Processing object type SCHEMA_EXPORT/USER
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    Job "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully completed at 09:42:50and system.sql is:
    -- CONNECT OPS$XXX
    -- new object type path is: SCHEMA_EXPORT/USER
    -- CONNECT SYSTEM
    ALTER USER "SYSTEM" IDENTIFIED BY VALUES '970BAA5B81930A40'
          TEMPORARY TABLESPACE "TEMP";
    -- new object type path is: SCHEMA_EXPORT/SYSTEM_GRANT
    GRANT GLOBAL QUERY REWRITE TO "SYSTEM";
    GRANT CREATE MATERIALIZED VIEW TO "SYSTEM";
    GRANT SELECT ANY TABLE TO "SYSTEM";
    GRANT CREATE TABLE TO "SYSTEM";
    GRANT UNLIMITED TABLESPACE TO "SYSTEM" WITH ADMIN OPTION;
    -- new object type path is: SCHEMA_EXPORT/ROLE_GRANT
    GRANT "DBA" TO "SYSTEM" WITH ADMIN OPTION;
    GRANT "AQ_ADMINISTRATOR_ROLE" TO "SYSTEM" WITH ADMIN OPTION;
    GRANT "MGMT_USER" TO "SYSTEM";
    -- new object type path is: SCHEMA_EXPORT/DEFAULT_ROLE
    ALTER USER "SYSTEM" DEFAULT ROLE ALL;
    -- new object type path is: SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    BEGIN
    sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'BAS002.REGRESS.RDBMS.DEV.US.ORACLE.COM', inst_scn=>'1456160');
    COMMIT;
    END;
    -- new object type path is: SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.CLEANUP_SCHEMA_IMPORT;
    COMMIT;
    END;
    / These export and import steps don't take into account privileges granted on schema objects belonging to another user likely due to to the EXCLUDE statements.
    Message was edited by:
    Pierre Forstmann

  • How to Create an Input Enabled Query

    Thanks in advance for your help, and sorry for the seemingly simple question, but I am new to integrated planning.
    I am trying to provide a simple method for the end users to update planning data in a cube.  From what I read I should be able to do this with a real time cube and an input enabled query.
    I have created the real time cube with my desired characteristics and key figures.  I have loaded base data to it and change it to be input ready.
    Now I need to create my input ready query.  I cannot seem to figure out how to do this.  From BEx Analyzer the options for enabling input and change mode at query start are greyed out.
    Can someone enlighten me on what I am missing or suggest some reading on how to do this?
    Regards
    KB

    OK, I got over this hurdle.  Turning a KF on for input enable the selection to have the query open in change mode.  However, when I do this and run the query in WeBEx the query line style changes to all blue and does not allow input.
    I have all my Characteristics from the cube included in the aggregation and have included them all in the query as well (in the same order).
    Any thoughts?

Maybe you are looking for

  • Setting up aim mail

    i use the free email service aim mail from aol and am having trouble setting it up with the mail program. aol's support was no help and i was wondering if anyone knew how to set it up?

  • IWeb Displays Images Different! HELP!!!

    I am a photographer, and I put my best photos on my iWeb site. My photos are all normal, but when I view them after uploading onto the internet (on several different computer screens) all my photos have been automatically enhanced (more contrast, boo

  • How to make smooth slow-mo?

    I cannot for the life of me figure out how to slow down clips? Currently, I am working in iMovie, and when I slow down the clips, they are really jumpy, even though I shot them at 720p 60fps. I can't even find out how to slow clips down in Final Cut

  • Adding original solaris 7 cdrom packages...

    Hi all, I need to add packages from the original Solaris 7 CDROM on my solaris 7 system. How can i do it ? I usually use the command : pkgadd -d "package_name" but it doesn't seems to work in taht case : dmphp1 # pkgadd -d SUNWarc pkgadd: ERROR: no p

  • Updated TC Firmware now Xbox 360 won't detect network

    Has anyone else installed the new firmware and connect a 360 to the TC Wireless? My Xbox won't even find the network when i scan for networks now! If i create a network on my Mac it finds it fine though. Anyone experienced this problem or got it to w