How to create a PDF page that displays in Email and contains links to a page in the full PDF.

Mac, CS 5
I was able to create the PDF page and activate links to pages in the full PDF document. But when I test-email both files to myself, the links do not work.

You have created links between two PDFs while they were regular disk-based files (I assume using the 'open a file' link action). When they're both attachments to an email message they are no longer in any meaningful 'location'. Some mail clients will extract all the attachments in a message into a temporary cache folder, so they do end up being able to see one another; but others will open each attachment on demand and prevent them from accessing anything else. Attachments are a huge security risk and sandboxing them is always best practice - the result of which is that lots of PDF functions just don't work.

Similar Messages

  • How to Create a "FAQ" page where the top of page has all the Hyperlinks

    Hi,
    On iWeb, how do I Create a "FAQ" page where the top of page has all the Questions as Hyperlinks.
    The hyperlinks would not actually link to a separate page, but would automatically scroll the page to the spot where the question is answered.
    An good example is below:
    http://www.cardrunners.com/members/index.php?option=com_content&task=view&id=102 &Itemid=2
    Thanks for your help!

    Sarah,
    As is pointed out what you would like to do is old fashioned Anchors, real easy on a conventional site but not so easy in iWeb.
    I made an FAQ by just making questions followed by answers and increasing font size and using bold to make the questions stand out so it is easy to use.
    Much more work for you but will approximate what you are trying to achieve is this: On the FAQ page make your list of questions each of which you will make into a hyperlink to go to another page. For every question add a blank page to write the answer on. Uncheck the relevant box so that that page does not appear in the navigation bar. Write your answer on that page then under it make a hyperlink back to the FAQ page. The page would also by default have the normal navigation menu at the top, but adding a "Close Window" or "Back To FAQ" link that is actually just a hyperlink to the FAQ page is helpful for site visitors.
    While a lot of work to make the extra pages it should work well and solve your problem.
    The simplicity of iWeb soon provides problems as soon as you want to do more than the basics offered.

  • How to create multiple cover pages following the text

    Hello everyone,
    I have a such difficult problem on pages : I would like to create multiple cover pages, and I want these pages to follow the text. I will to explain this a little better.
    I have to write a really long report. I need to divide it in some "sections" (I'm not sure that's the same meaning that in the software) and each section would start by a kind of cover page with a fullpage photo and a title in textbox. Let's see it with a capture :
    My problem is that I would like this page to follow the text. Because on the previous page, I have a table of contents which is evolving and taking more and pages each time. And the problem is that my "cover page" isnot moving to stay after the table of contents, it's the table which is continuing after it. So I have a first part before the cover page and a second part after the cover page. I would like all the text to stay before.
    Thank you in advance for any replies
    Evan Peuvergne, Hetic

    Use anchored images at the beginning of each section.
    You will need to initially make it smaller so you can position the image and the TextBox (make this second so it is higher in the stack) set a page break, then enlarge the image and Textbox to suit.
    If they are anchored (Move with Text) they will maintain ther position in the document.
    Turn off Text wrap on both your image and the Title. Insert a Page Break after the Title Textbox anchor on the page to move the following text to the next page of the section.
    Peter

  • How to create a par file that includes an image and a .swf file

    Hi everyone,
    I have a requirement to create a <b>.par file which will contain a .swf file and a .gif file</b>.
    Can anyone please tell me the steps to do so.
    Thanks in advance

    Thanks Ranjeet for the quick reply.
    I have created a portal project and placed the .swf file and the .gif file in the images folder and deployed it to the server. I downloaded the .par file and chked that it contained the .swf and .gif files. But when i run the application it <b>does not show me the .swf file</b> . An icon with a cross mark appears instead. I have flash player installed on my PC .The .gif file when run works fine but not the .swf file.
    Can anyone tell me a workaround for this ?

  • How to create a pdf or jpg of a group of photos in LR4

    Is it possible to create a jpg or pdf of a group of images in LR4, like you can in Bridge output?  I try the Web section and it creates a perfect page of the images but it's only available in HTML and Flash. 
    I don't need the photos to be enlarged at all, I just want a preview of a few images with a title.  I can still use Bridge but since I've started using LR4, I've not really a need for photoshop, or rather, why
    spend $33/mo for photoshop when I really don't have a need for most of what photoshop offers.  However, I do need to make previews of photo and video series.  My website is a pay site that is password
    protected except for a blog/updates section, and the model preview galleries.  Right now it's just so easy in bridge to get this done but it would be nice to save some money and do this in lightroom.  Uploading a web
    gallery directly to the dedicated server is possible but getting onto the blog/updates page which is not password protected would be the problem, as I see it. 
    The updates/blog page has a feature image that is displayed on the homepage of the website at 670 pixels wide and up to 230 pixels tall, though I usually stay between 90-150. In photoshop you can set your crop tool to those dimensions 670px by 110px for example or in bridge I can use multiple video screen captures or photos and have bridge make the small image by setting the particular parameters in output.  Is this possible in LR? The updates/blog page has the feature image and then you can add other media along with your text.  This is where I upload the series preview image board/web gallery.  Oh, and I did try the print section but would prefer the ability to add titles and description.
    Thanks in advance for your help. 

    Great, it works! That's the first time I am using this forum, and I must say I'm amazed at how fast I got an answer.
    Thank you very much!

  • How to create a standard report that allows filtering?

    Hi Guys and Gals,
    Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    Allowing the user to specify the number of rows displayed would be peachy-keen too.
    Thanks,
    Kim
    P.S. I'm running Apex 4.1 with Oracle 11g.

    Kim2012 wrote:
    Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
    create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
    >
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    >
    Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
    More good advice: Re: Newbie question-how does the tabular form work?  How to populate prim key? and&mdash;if based on decent database design&mdash;out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app.

  • How to create a pdf file from multiple images ?

    Dear All,
    I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast  two color images and a black-and-white mask for one of them.
    I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
    When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
    However, I dont know how I can give a command to select say,  three tif images and specify which is the mask for which and then join  them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
    Please help me out.
    I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
    Best Regards
    Disabled Veteran [physically handicapped]

    Hello Again.
    On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
    >
    > Re: How to create a pdf file from multiple images ?
    >
    > created by lrosenth in PDF Language and Specifications - View the full
    > discussion
    > ________________________________
    >
    > No clue who Irving is…
    >
    I was hoping to have your first name so its easy for me to address you.
    > I have no clue what OS platform, programming language, etc. you use so
    > can’t really narrow things down.
    I would gladly mention that I am working on windows platform, preferably XP.
    I can also work on linux for free products that come with it.
    >  Also, as this is an Adobe forum, we only
    > recommend Adobe products – so there may be other options that even my list
    > wouldn’t include.
    But adding other products, for the help of an adobe products user,
    even if it outside adobe, shall add greater prestige to your company
    and give impression of user-centeredness.
    > If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
    > information about Images and Image Masks well described.  I didn’t think I
    > needed to repeat any of that information.
    Well, just add the few pdf stanzas since you are proficient on it and
    I am presently a little rusty as I mentioned. Just asking a little
    extra yard, not even to go an extra mile.
    > And, if you read that same document, you will see that there is NO SUCH
    > THING as a “text only PDF”.   All PDF documents are structured binary files.
    Well, ascii format or uncompressed format that is human readable. I
    know its a binary file, but human readable ascii version of it.
    I hope you can give me some stanza and various other approaches
    possible so I can select or combine things for myself. I see only a
    miniscule number of posts claiming to have written masks in this forum
    and then with no details.
    Regards
    Roger
    Message was edited by: dying veteran
    because the adobe posting system went crazy and truncated all except the first line ... dunno why

  • How to create a pdf with the correct size?

    Hi there
    How do I create a pdf with the correct size? I created several albums and ordered them. Now I want to backup the album and I know how to create a pdf, but when I choose A5 it's to big, when I create my own size it's not the size it should be. The original (made with iphoto) is a small size album 200x150mm. But when I create my own size (200x150) it shows some white borders.
    Does anybody have some tips ore workarounds?
    Yuri
    Imac
    Iphoto 11 (9.4.2)

    Books are designed for and printed on 8.5 x 11 inch stock, US Letter size.  You shouldn't have to select any size.  While viewing the All Pages mode in the book Control-Click on the page and select Save Book as PDF from the contextual menu. 
    That will create a PDF that iPhoto uses to upload and print.  Not all pages will be the same size as the dust jacket will be present in it's full size, 32.8 inches x 8.91 inches:
    If you want a PDF that's designed for your own printing the type Command+P while viewing the All Pages window.  In the first print window click on the PDF button.  It will present you with a contextual menu where you should select Save as PDF.  That will give you an 8.5 x 11 PDF file with all pages the same size.
    OT

  • Does anyone here knows how to create a login page thru JDBC?

    Anyone here knows how to create a login page which connect to database thru JDBC but not JDBC-ODBC bridge?

    Hi..pls you'll do people here a great good if you could explain yourself better..!
    Anyway if you are trying to connect to an Oracle Database you dont need the jdbc-odbc bridge as oracle provides a special driver for java applets/applications that is "the thin driver" and the "oci driver"..so if you are connecting to Oracle your connection will look like this:
    Class.forName("oracle.jdbc.driver.OracleDriver"); //not sun.jdbc.odbc.JdbcOdbcDriver
    Connection con = DriverManager.getConnection ("blah blah, blah");
    no need for the jdbc-odbc bridge.
    I hope i've answered your question.
    Thanks.

  • I need to know how to create a pdf document larger than 129 inches from MS Project 2007

    I am completely new to Adobe Acrobat Pro 9. I need to know how to create a PDF which is larger than 129 inches for use on a plotter from MS Project 2007. I have searched the Adobe support articles with no success. Any help would be appreciated.  Thank you.

    Thank you.  I have tried that but it will only let me go to 129 X 129 inches, no larger.
    Sincerely,
    Bill Stern
    NSD IT Support
    22289 Exploration Drive
    Suite 305
    Lexington Park, MD 20653
    Phone: 301.862.4577 ext 10
    Fax: 301.862.9828
    Email: [email protected]

  • How to create authorization role for just displaying query prefix Q and X.

    Hi Expert,
    I hope someone can help me on how to create authorization role for just displaying and executing  BEX  Queries prefix Q and X. I'm currently using SAP BI 7.1.
    Actually, I already created one role called : Z_FORINDO_ONLYDISPLAY_QX
    where I only put in the Authorization Component (in the Role Maintenance - Tcode 'pfcg'):
    -->Manually Business Information Warehouse
        --> Manually Business Explorer - Components
    Activity : Display, Execute, Enter, Include, Assign
    InfoArea : *
    InfoCube : *
    Name(ID) of a reporting component : *
    Type of a reporting component : Calculated key figure, Restricted key figure, Template structure
        --> Manually Business Explorer - Components
    Activity : Display, Execute
    InfoArea : *
    InfoCube : *
    Name(ID) of a reporting component : Q* , X*
    Type of a reporting component : Query
    But, the problem is I still can make changes on that queries (Q* and X*). Even, I still can run query with prefix Z. I use S_RS_RREPU Tamplete for Query Display and execution.
    Please assist. Very much appreciate your help. Thanks.
    Edited by: nadiyah salleh on Mar 18, 2008 11:22 AM

    Question close. This issue has been resolved.

  • How to create a html page

    Hello,i am very new to dreamweaver 8,and i have searched
    everwhere possible on how to create a html page.My website has a
    navegation bar.And on the navegation bar it has links,like
    forums,your accounts,and etc,but thats already integrated with the
    website.Now i have an option in the admin area,wher i can create a
    new category so that it would show up in the navegation bar,and i
    have a drop down menu where i cans select what to put in that
    category.But also i have an option to put a external url,so that
    when they click on it,it will take them to where that link is
    directed.The point is that i asnt to make a category in the
    navigation menu that says Lirics.So that i can put lirics of songs
    and etc,and that when users click on that link it will take them to
    the lirics page..Do you guys understand?Sorry for the bad english,i
    am now quite good with it..

    The most eloquent description will do nothing for us. To get
    a solution to
    your problem, we must see your code. Can you upload the file
    and post a
    link to it, please?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "don_playboy" <[email protected]> wrote in
    message
    news:eaadi9$kjf$[email protected]..
    > well what i am trying to say is that i created a Folder
    named
    > Liricas(which is
    > lirics in spanish),on my ftp.Now since i created that
    folder in my ftp,it
    > will
    > show on my navegation menu control panel.But it will be
    blank since it has
    > nothing on it.Now what i want to do is,sicne i created
    that folder,and i
    > go to
    > my nav meny control panel and select it as a category it
    will show on my
    > navegation menu(the Liricas that is),but when u click it
    it has
    > nothing,since
    > it has no html or anything in the category.Now i want to
    create a html
    > page so
    > that i can put albums names,and under those albums name
    i want to create a
    > link
    > or category thats for lirics.So all this will be stored
    on the ftp.and
    > when
    > users click on the Liricas category on my navigation
    menu,it will take
    > them to
    > the liricas index page,which will show all the lirics...
    >
    >
    >
    >

  • How to create a HTML page like iView, thanks in advance!

    How to create a HTML page like iView, thanks in advance!
    I'm a newcomer, would you please tell me how to create a HTML page in WebDynpro ? In fact, i want create one welcome page which use html format and include some javascript.
    thanks again.

    jakinapallykrishna , thank you very much for you reply.
    The pdf file is a simple application, but i want know how create a view in HTML format (<HTML>... </HTML>), maybe use HTMLB control, i don't sure it.
    In fact, I need create a view in portal, some pictures in it, once mouse over one picture, it need change another picture replace old one. I don't know how to do it, just know it can be handled in HTML page. So, i need help.
    Thanks.

  • How to create a One Page checkout

    Hello nice people,
    Does anybody knows how to create a ONE-PAGE Check Out Process in Online Shop Layout?
    Thanks in advance

    "I can resolve the problem if I can insert one page (or step) after
    "registration - buy". This would be a "summary" page where the customer has
    the last opportunity tu check out all his data and, if it is needed, to
    correct his order, billing address, shipping, the way of payment"
    <<< The only way to do this is with JS. You can use jQuery's .load() method
    to load your cart into the registration layout. You'll have to do some
    parsing of that cart table to obtain things like product name, quantity etc
    and present this in some kind of summary. Parsing tables in jQuery is not a
    nice task, so if you're going to embark onto producing this kind of summary
    you may want to get rid off the table from the cart and simple throw in
    some divs and tags which will help you parse the cart nicely. That mans
    you'll have to construct the layout for the cart though using JS.
    Example of alternative cart layout:
    It renders like this:
    product one
    (S)
    product one
    (M)
    onchange="UpdateItemQuantity(this.value,231502,234492,6737768,183427,'','US');return
    false;" class="cartInputText" type="text" value="1">
    onchange="UpdateItemQuantity(this.value,231502,234492,6737768,183428,'','US');return
    false;" class="cartInputText" type="text" value="3">
    $10.00
    $45.00
    $55.00
    You can see that this is much nicer to read and you can then construct your
    own data structure that will hold this info and render it it whichever way
    you want to. You can even write it back as a table where each product is in
    its own row. You may want to look at something that gives you template.
    model, controller like ember.js.
    Anyway, I hope that helps somewhat.
    Cheers,
    M

  • How to create a multi-page collapsible & CSS styleable table of contents box?

    How to create a multi-page collapsible & CSS styleabe table of contents box?
    Is there a tool available for Dreamweaver or for standalone operation that can create for multi-page articles a collapsible & CSS styleabe table of contents box based on the page titles?

    You could do this with jQuery.
    Table of Contents -
    http://www.downloadjavascripts.com/list/javasiteccc68/Details.aspx
    Collapsible Panels, Tables & Accordions -
    http://www.downloadjavascripts.com/Collapsible_And_Free_Accordion_Panels.aspx
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

Maybe you are looking for

  • Safari and YouTube no longer show up.  How do I reload them?

    A few months ago, my daughter noticed the YouTube icon gone on an iPhone 4 (not Siri).  Now the Safari ICON is gone.  I used iTunes to sync but can't find anywhere to add Safari back to the iPhone.

  • Questionaire answeres are not saved in opportunity

    Hi, I have create my questionaire and assigned to my transaction type (opportunity). When I go to Assessment block I am seeing this on the web client GUI. Also I was able to open it and choose the answers for the questions displayed. But when I click

  • Question about Beat mapping

    First of all, is there any way to do it? does premiere have the ability to read in a track and select markers for the beat? I can understand if this is impossible. Is there a program in which i can utilize its beat mapping capabilities but then bring

  • Configuration, Partition, etc...

    I am very new to MAC OS. I just bought a new MAC Book Pro last night. I am looking to run Windows 7 via bootcamp. However I have a few setup configuration questions before I get started. What I would like is a partition that can be used to read/write

  • Refreshing alv but how?

    while using alv, how can we refresh it? if it is not first display then of course will be refreshed but how, I do not know. Anyone that can help me? How it is understood that it is refreshed? When clicked a tool or button? Thanks in advance. Deniz.