How to create a Pooled VDI infrastructure using Win server 2012 as VM image?

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

How can I create a Pooled VDI infraestructure using Win server 2012 as VM image?

Hello
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Dear Ryan
I think the point is other than committing a breach of licensing. I have a legitimate need to use a pooled server system, which incidentally is not going to be end user.
The "economy" of the proposed structure can make a more efficient use of the equipment.
This is an excerpt of the MS VDI Q&A:
Do I need to pay for Windows VDA if I use Windows Server as a client operating system in my virtual machine?
OR
I’ve heard that I can avoid paying for Windows VDA by using Windows Server as my VDI desktop OS. Is this true?
Running a Windows Server®
OS as the desktop in the datacenter does not require Windows VDA, but there are many reasons why a server OS should not be used as a desktop, especially in the datacenter:
The user experience with servers as the desktop is very different from using a Windows client.
Many applications for end users were written for a client OS and not a server OS. Each of your applications would need to be retested to ensure compatibility with a server OS. Additionally, most vendors
do not offer support for client applications running on servers.
Clients and servers are on different patch cycles, adding to management complexity.
Most of the VDI ecosystem will support the Windows client in the datacenter, not server OS’s.
However, if you do decide to run a server OS as the desktop, please note that you will need to pay a Remote Desktop Services Client Access License (RDS-CAL) to correctly license that scenario.

How to create YTD and MTD reports using Sql Server 2008 r2 report builder 3.0

Hi All,
How can I create YTD report from the below data. please help me
ProdA     ProdB     ProdC     Month    Year
10       50        40          January     2012
Data for full Year i.e. from Jan - December 2012
50      90      100        January       2013
Data for full Year i.e. from Jan - December 2013
90      40         30        January        2014
Data for full Year i.e. from Jan - Till Date 2014
MercuryMan

You can use a correlated subquery to calculate YTD in query behind. You can use APPLY operator for that
so something like
SELECT *
FROM Table t1
CROSS APPLY (SELECT SUM(ProdA) AS TotA,SM(prodB) AS TotB,SUM(prodC) AS TotC
FROM Table
WHERE Year = t.Year)t1
And show TotA,TotB and TotC in the required total row
Another method is to add required totals in SSRS by clicking on relevant group and choosing Add Total option
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create a composite nonclustered index using sql server management studio

Hi,
How do I create a composite non clustered index using Manage Index and Keys dialogue box?
sukai

See image below:
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

How To create Connection Pooling in Oracle 10.1.2.0 Application Server

Hi,
How to create Conncetion Pooling in Oracle 10g Application Server. I am using 10.1.2.0 version.
Thanx
Dhans

Hi,
How about these tutorials?
http://www.oracle.com/technology/tech/java/newsletter/articles/oc4j_data_sources/oc4j_ds.htm
http://www.oracle.com/technology/products/jdev/tips/duff/mysql_and_oc4j3.html

How do you remove virtual desktops from a Windows Server 2012 R2 Pooled VDI collection

All - I have created a Pool VDI Collection with 15 total virtual desktops in it. I need to reduce the number of virtual desktops in that collection to five. I have searched through the GUI, TechNet and done a number of Google searches but nothing helpful
comes back. Does anyone know how to do this?
I am guessing I cannot just delete them out of Hyper-V since the collection knows how many desktops it is supposed to have assigned to it.
Thanks in advance.
Will Smothers

Hi Will,
Thank you for posting in Windows Server Forum.
We can use PowerShell command “Remove-RDVirtualDesktopFromCollection“ to achieve your goal.
PS C:\> Remove-RDVirtualDesktopFromCollection -CollectionName "Virtual Desktop Pool" -VirtualDesktopName @("RDS-WKS-A27") -ConnectionBroker "rdcb.contoso.com"
More information.
Remove-RDVirtualDesktopFromCollection
http://technet.microsoft.com/en-us/library/jj215515.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Issue while creating connection pool in weblogic using SERVICE NAME

Found two issues while creating connection pool in weblogic using SERVICE NAME
1. While running apps from jdeveloper using xxx-jdbc.xml
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
2. Configuriing the jndi in Weblogic server
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:SERVICENAME
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
Problem
database url is generated based on SID
eg: jdbc:oracle:thin:@localhost:1521:SID
Solution
(generate seperate url for SERVICE NAME)
jdbc:oracle:thin:@localhost:1521/SERVICENAME
------------------------

It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to create ringingtone into my iPhone using macbook?

pls teach me how to create ringingtone into my iphone using macbook...

Have you installed iOS 5 on your iPhone 3GS?
If not - then connect it to iTunes, and prepare yourself for a very big download!
It will give step by step instructions once iOS 5 is installed.
Cheers,
Rodney

How to create an RDBMS event generator using wlst on weblogic 10.3

how to create an RDBMS event generator using wlst on weblogic 10.3, i got a code fragment needing class "com.bea.wli.management.configuration.RDBMSEventGenChannelConfiguration"
but i can' t find this class in classpath on weblogic 10.3, pls help me, thanks. code sample is better.

Hi,
RDBMS Event Generator Channel Rule Definition
When you are creating channel rule definitions in the WebLogic Integration Administration Console, it is recommended that you do not use the Back button if you want to resubmit the details on a page.
You should always use the navigation links provided and create a new channel rule definition.
http://download.oracle.com/docs/cd/E13214_01/wli/docs85/deploy/cluster.html
http://download.oracle.com/docs/cd/E13214_01/wli/docs81/relnotes/relnotesLimit.html
http://otndnld.oracle.co.jp/document/products/owli/docs10gr3/pdf/deploy.pdf
This problem has been seen in the past when defining the channel rule for an RDBMS Event Generator if schema name was specified with the incorrect case (i.e. lowercase when it should have been uppercase or vice versa). To that end, it is suggested to change the case of the schema when creating the channel rule
Regards,
Kal

How to create an apple id without using credit card

how to create an apple id without using credit card.. i have recently purchased apple iphone 3gs bt unable to get apps because of giving credit card info which i dnt hav.. so plz tel me some way to process..

To get the none option, sign out of anything apple you're signed into. Go to the app store and try to download a free app, any free app. Instead of signing in, take the option to to make a new apple ID. Then go through the steps to make the ID and you'll see the 'none' option.

How to create search function (af:query) using method in java

hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmt

Hi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank

How to create autofilter in excel page using jxl api?

Hi Friends,
I am using jxl api for excel generation. Its no problem
but i need to set auto filter options. I am search in this API package but i can't find it.
Any one know how to create autofilter in excel page using jxl api?.
Please ..... Its urgent.... ...
Thanks

Hi,
Please mail me on [email protected] if u will find any solutions, i will do the same if i will find any...
Thank u in advance,

How to create Auto suggestion component by using of ADF tag

Hi ,
In my project, I am using the ADF frame work and I need to use the auto suggestion component.
Can any body suggest me how to create Auto suggestion component by using of ADF tag.
Waiting for your valuable suggestions...

Try this forum:
JDeveloper and ADF
You might get a lot more response.
Jan Kettenis

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?

Similar Messages

Maybe you are looking for