How to create a pop up window while creation of the delivery note.

Hello Experts
How to create a pop up window while creation of the delivery note.
As soon as we go in to delivery note creation screen in VL01N, immediately a pop up screen should be displayed on the screen containing the following details,
For e.g.
Str. Loc     Qty      UOM
DE01        100        KG
DE99          50        KG

Dear all,
i m having two document numbers for invoic of same types such as output type print program and smartform.
biut the issue is im getting print preview for one invoic and for another invoic i m not getting any print preview.
Directly the cursor comes to initial stage of vf03.
suggest what to do
Thanks and regarnds
ravi

Similar Messages

  • Credit Check is not working while creation of the delivery

    Hi,
    Credit check is not performing while creation of the delivery.
    As per current settings, there is no credit check at SO level. Ideally, system should show an error message while creation of the delivery if credit limit of the customer is exceeds.
    Below is the current OVA8 setting for Delivery group 02.
    It was working fine till last week, but due to some unknown changes in customization or master data, same is not working now.
    Could you please check below settings and suggest if any setting is wrong?

    You talking about the reaction field D am talking about beside to reaction field that is status/Block(check) .
    Status/Block(tick) is used to block the document.
    Where as you reaction field is used to give the either warning or error message based input you are giving
    A and C gives warning message and allow to save the document.
    B and D gives error message and will not allow to proceed further
    Please check this and try system will block the delivery.
    thanks,
    Srinu.
    Message was edited by: Srinu S

  • How to create centered pop up window

    How do you get a pop up window to appear at the center of a
    screen? I did it in the past on go live using an action form a 3rd
    party. I don't see any placement options on the pop up window
    behavior.
    thx

    Works for me using Firefox :-)
    Nadia
    Adobe® Community Expert : Dreamweaver
    CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    ~ Customisation Service Available ~
    http://www.csstemplates.com.au
    ~ Forum Posting Guidelines ~
    http://www.adobe.com/support/forums/guidelines.html
    CSS Tutorials for Dreamweaver:
    "martinstan" <[email protected]> wrote in
    message
    news:etmrvs$7v5$[email protected]..
    > Hi Murray
    >
    http://www.flevooware.nl/dreamweaver/extdetails.asp?extID=8
    >
    > it's the link that actually starts the download from
    this page. Nothing
    > seems to happen.
    > Thnx
    > Martin

  • How to create a pop up window with text information?

    Hi experts,
    I am a newbie in LC and I have created a form to be sent to the vendors by our buyers.  Everything seems fine except the Accounting Manager would like to include our Financial Details in the form.  I would like to simply create a pop up window with the information which will be activated by pressing a button.  I have tried to create an invisible button and a visible button to achieve this but didn't succeed. 
    p.s. I have no javascript background but slowly learning.  I would appreciate if anyone can assist me to complete the task.
    Thanks a million.

    Hi Mdjco,
    Thanks for replying.  What I need to accomplish is to have another page of information with all the financial details on the pop up window and the vendor has a choice to print it out or not.  After the form is filled out, it is to be sent back to our buyers.  So instead of me inserting a 2nd page with the information, I would like to hide it unless someone presses a button to show it.
    I have found something like making 2 buttons, one is invisible with all the information on it and the other one "visible" to activate the invisble button.  Didn't work at all.
    Also another question is after the vendor insert the digital signature, it automatically asked to save (which I found out why from help) and then it opens up the email and sends the form as XML.  I will need it to send as PDF, possible??
    Much appreciated.

  • How to create a pop-up window with a larger image

    Again, I'm looking to do something very simple and can't figure it out. I want users to be able to hover over/click on an image and there pops up a larger version of the image, much like you see on online catalogs and shopping sites. I've looked into Lightbox and jQuery but don't understand how to incorporate the code into my pages. Is there a simpler way using DW CS4?
    Thanks,
    Gail

    Select the thumbnail image and link it to the larger image file.
    Use DW Behaviors Panel and hit the plus + sign.
    Choose Open Browser Window.  This will invoke another panel for adjusting the size and other attributes of your pop-up window.
    Hit OK.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How To: create legaleze pop up window in pdf form?

    Hello all. I would like to incorporate a pop up window with my company's legaleze for authorization to use our images in our customers marketing materials. The purpose of the legaleze is to inform the customers our policy on using our images in their marketing materials. The pop up would obviously contain two radio buttons (1. I Agree AND 2. I Disagree) Where if they agree they can continue to fill out the form and request images. But if they disagree they will not be allowed to fill out the form and submit it.
    The form will be distributed via email, and be downloaded from our website.
    The most important aspect of this is that the pop up window with the legaleze function properly. The secondary aspect of the form not being able to be filled out if they disagree is not as  important. Obviously if I see that they disagree, I will not release the images.
    Thanks for your help!

    Adding layers to a PDF is a new feature in version 9 (you can work with layers in version 8, but have to add them in InDesign).
    In 9, add the layers Navigation Panel (View>Navigation Panels>...), then click the gear symbol and choose Import as Layer, and select your PDF with the legal agreement.
    You can control the layer visibility with a button action (one action is "set layer visibility"), and JavaScript can be used to show or hide buttons. So your accept button would have two actions, one layer visibility action and one execute JavaScript action that controls field visibility. A field called Name is controlled by changing that button's display property (hidden/visible):
    var a = this.getField("Name");
    a.display = a.hidden;
    etc.
    For more JavaScript info, check here.

  • How to create a pop out window?

    Can any buddy help me?
    I need a Pop Out window, that is 630Pixels X 430 Pixels...For a Flash Poll sistem
    I have search in google, for tutorials but it is just not working....
    What I being looking for, is to add like a link to a Text, and a pop out window appearing, to put a poll
    Any advice...thanks
    This is the code I being using
    </object>
    </noscript><script language="javascript" type="text/javascript">
    <!--
    function popitup(url) {
        newwindow=window.open(url,'name','height=430,width=630');
        if (window.focus) {newwindow.focus()}
        return false;
    and for the Text link
    <p><span class="style12"><a href="encuesta.html" onclick="return popitup('encuesta.html')"
        >CLICK AQUI ENCUESTA</a>

    But is the function "popitup()" actually defined somewhere? if there is no complementary script code in the head or an external JS file, naturally it won't work. And by all means, one can find a million alternate pop-up code generating tools...
    Mylenium

  • How to create a setup for window form application including the related sql database?

    i have created a simple window form application project that have only 2 form..
    1st one for login in which it'll check the userid n password from database.if both are correct then it will go to 2nd form.
    now i want this project to run in another computer.
    i created a setup file but its showing some error regarding the database instances connection..
    so if anyone can tell me in details how to create the setup file then it'll b a great help..
    thanx in advance..

    Hi,
    Consider the above scenario,I suggest you to use the SQL Server Compact+ ClickOnce Deployment, A Compact SQL database is a file that can be bundled with your application installation. Below is a link guiding you through the creation process of a SQL Compact
    database.
    http://technet.microsoft.com/en-us/library/ms173009.aspx
    The following link discusses setting up the necessary dependencies and prerequisites for SQL Server Compact. (Note, you will need to scroll to the section entitled Private File–Based Deployment.)
    http://msdn.microsoft.com/en-us/library/aa983326(v=VS.100).aspx
    A ClickOnce Deployment can help you publish your application attach compact SQL database into client machine.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to I make pop up windows go back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window pops up. That's good, that's what I wanted. They've always opened on the left side of the screen. However, they are now opening in the middle of the screen. This has happened before and the screen eventually opened completely on the right. Last time this happened, I ended up having to delete something. I don't remember what, but it solved the issue. Please help!

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to emove the Firefox plist file (org.mozilla.firefox.plist).
    *http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

  • How to create a pop iView?

    hi, I am hanif i am new to portal,can anybody please tell me how to create a pop iView once the user logIn to the portal , iview shud popup like an normal window popup automatically and shud be closed by the request button pressed by the user.
    is there any property of iView or can be done by programming only.Plz provide me assistance in the case.
    Thanx in advance
    Regards:
    hanif

    Hanif,
    This is some thing you can develop using the JSPDynpage.
    This blog expalins how to create a pop up window for logon :
    Custom login screen for External Facing Portal
    Here attached some help, might be helpful.
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1228101,00.html
    Thanks
    Krishna

  • I would like to create a pop-up window appear from Labview Interface. In this window, I will have a slide control and an image taken from a camera. The main VI have to run while pop-up window is open. How can I do ?

    When I pushed a button, this pop-up window has to appear. There will be a slide control and a picture from a camera in this window. Is it possible to make appear this windows while main VI Interface continue to run ? How can I do this ? Thank you for your answers.
    Cyril.

    Here you go. This is simple example. Maybe not the best way, I am just
    beginner in LV and still not comfortable with data flow that much. I prefer
    events, so I would change this to use Event Structures.
    When you click on OK button on SliderMain, it opens Slider.vi. Now both
    windows are open and you can interact with both. Now if you click on OK
    again with Slider.vi open, you run into problems. Only thing I did was
    change VI properties of slider.vi, mainly window appearance.
    vishi
    "Cy" wrote in message
    news:[email protected]..
    > I would like to create a pop-up window appear from Labview Interface.
    > In this window, I will have a slide control and an image taken from a
    > camera. The main VI hav
    e to run while pop-up window is open. How can I
    > do ?
    >
    > When I pushed a button, this pop-up window has to appear. There will
    > be a slide control and a picture from a camera in this window. Is it
    > possible to make appear this windows while main VI Interface continue
    > to run ? How can I do this ? Thank you for your answers.
    > Cyril.
    [Attachment SliderMain.vi, see below]
    [Attachment Slider.vi, see below]
    Attachments:
    SliderMain.vi ‏16 KB
    Slider.vi ‏11 KB

  • How to use one pop up window for multiple buttons and input fields?

    Hi Experts,
    I have created a pop up window that will be opened from multiple buttons in the same view. There are input fields that the data will be populated from a pop up window.  How can I set up which button that a pop up window is opened from? I also would like to populate the data from a pop up window to the input field next to a clicked button. There are 6 buttons and 6 input fields that share the same pop up window. I would very appreciate your responses.
    Thank you,
    Don

    Hi,
    Try creating 2 context attributes, one in your component controller and the other in the pop-up view. Bind the attribute of pop-up view to the component controller attribute.
    In the main view, on click of every button set a unique code in the controller's context which helps you in identifying the button clicked. Since u have created a binding to the pop-up view attribute the value flows from the controller.
    In the init method of your pop-up view, check the value of the attribute and based on that display which ever UI elements are required.
    Eg:
    On Button 1 click set value "B1", Button 2  value "B2" etc. In the init() of pop-up view u can check the values and perform the required operation:
    if(("B1").wdContext().currentContextElement().getButtonIdentifier()){
    else...{
    Hope this helps you.
    Regards,
    Poojith MV

  • Trying to create a pop-up window creates 2 identical windows

    Hello,
    I am trying to accomplish the following:
    Clicking text in my webpage and causing a small pop-up window to open.  I have tried this 2 ways: the first way, I get a new tab in my browser, but it is full-sized; the second way, I get a new tab in my browser AND a small pop-up window.
    Here's the first way:
    1. highlighting the text that should be an "object."
    2. entering a URL in "Link."
    3. defining the "Target" as _blank
    This opens my link in a new browser tab.  This is good, but I'd like this to be a smaller pop-up window so that my full-sized webpage remains in the background.  Please note that if I select any other option for the "Target" or leave that box empty, my webpage is replaced by the url entered in the "link",
    Here's the second way:
    1. highlighting the text that should be an "object."
    2.  entering a URL in "Link."
    3. leaving the "Target" box empty
    4. selecting "open browser window" in "behaviors" and defining that window as a smaller size
    This opens my link in a new browser tab AND opens a smaller  pop-up of that same link.  My webpage remains in another browser tab, but is not showing in the background (I have to close both the pop-up and new browsesr tab in order to get back to my webpage).
    Dreamweaver doesn't allow me to leave the "Link" field blank and select "open browser window" in "behaviors," which I believe is causing thi redundancy.  Since my "object" is not an imported image, but rather, text (such as "click here" that I hope to turn into an object), I wonder if I have to import some kind of file (e.g. jpg, etc. ) as an object in order to achieve my goal.  Can anyone tell mw what I'm doing wrong?
    Thanks in advance for any help!
    Heather

    John,
    Thank you for your reply--since you need to use javascript for this, I take it this is either not possible or very difficult to do in Dreamweaver?
    I'm going to try your script.  May I ask a few questions first?
    1.  Can I do this for multiple links on one page, and if  so, which parts would I repeat and where/ how?
    2.  Which of the values in quotations below do I replace with my own data?  I think it's "my-file.htm," "A PopUp Window of Helpful Search + Information Links" and "open_links()"?
    3.  For the part that goes "anywhere you want in the body," do you mean by "body" the general section with that type of data in it?  Or does that mean anywhere on the page?
    4.  Finally, If I prefer not to create a button, but rather, to leave it as text with a highlighted color for a link, is that possible?  I think it would require an input type other than "='button'", but what are my other options?
    Thanks again,
    Heather

  • Procedure to how to create a pop up in webdynpro

    hi all,
      will anybody guide me the procedure to how to create a pop up in webdynpro application..plz as am new to it and i had requirement of creating pop up window in starting the application.
    thanks in advance.

    hi suman,
    thanks for ur reply.
    i want my pop up when i clk on button ok on my 1st view.
    so i included the code in the method of ONACTION OK.
    but am not able to display any sort of pop up.
    my code is
    DATA lo_nd_node TYPE REF TO if_wd_context_node.
          data: lr_popup type ref to if_wd_window,
            lr_view_controller type ref to if_wd_view_controller.
    data lo_window_manager type ref to if_wd_window_manager.
    data lo_api_component  type ref to if_wd_component.
    data lo_window         type ref to if_wd_window.
    lo_api_component  = wd_comp_controller->wd_get_api( ).
    lo_window_manager = lo_api_component->get_window_manager( ).
    lo_window         = lo_window_manager->create_window(
                       window_name            = 'WW_POP'
                      title                  = 'my first message'
                      close_in_any_case      = abap_true
                       message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                      close_button           = abap_true
                       button_kind            = if_wd_window=>co_buttons_ok
                       message_type           = if_wd_window=>co_msg_type_none
                       default_button         = if_wd_window=>co_button_ok
    lo_window->open( ).
    will u help me out in this.

  • Creating a "Pop Up" Window/Box in Sharepoint 2010

    Hi, 
    I have a CEWP with several image buttons in it. When a user clicks on the images, a "pop up" window should appear which will have several different links for the user to choose from. So when the user selects the the link he/she wants to go to,
    the user will then be directed towards that page/list/form. 
    How can i create a "pop up" window/box for the 1st requirement? 
    Any assistance would be appreciated.
    Thanks, Aarti

    Hi ,
    Pls check if it can helps you
    http://social.technet.microsoft.com/Forums/office/en-US/a2fec044-669f-45a2-b979-7ec324831a8b/how-to-create-a-popup-message-box-in-sharepoint-2013-?forum=sharepointdevelopment
    http://social.technet.microsoft.com/Forums/office/en-US/9b5a0fa5-0c09-4753-b276-8e8e42c21542/create-pop-up-window-from-a-listview-in-sharepoint-2013?forum=sharepointdevelopment
    Please remember to click 'Mark as Answer' on the answer if it helps you

Maybe you are looking for