How to create a popup screen in user exit

Hi,
I need to create a popup  asking to enter a bar code in transaction MIRO (user exit)
Points will be rewarded
Thanks in advance

Hi jayasree,
1. we can use the FM
  POPUP_TO_GET_ONE_VALUE
regards,
amit m.

Similar Messages

  • How to call custom screen from User exit?

    Hai,
    I have to call a custom screen from user exit include after the delivery save.
    Depends on the data in the delivery,
    if the data satisfies certain conditions I will call the screen otherwise no.
    Could any one please tell me how to do this?where to create screen & how to link it here?
    Regards,
    Bhaskar.

    Hi,
    Please check with the following Enhancements -
    V50PSTAT  - Delivery: Item Status Calculation 
    V50Q0001   - Delivery Monitor: User Exits for Filling Display Fields
    Rewards if it helps
    Regard
    Goutham

  • How to create a popup window to load HTML page in AIR application without using any mx or spark?

    How to create a popup window to load HTML page in AIR application without using any mx or spark components?
    I need to load the HTML page in popup in AIR application without using any of the <mx> or <spark> components. I need to open in the application itself not in the browser.(If we use navigateToURL() it will open in th browser)

    Can we achieve this? can somebody help me on this scenario..

  • How to create a splash screen?

    I was wondering how to create the splash screen that shows up when you just load the program. My program takes a bit to load, because it sets to change the look and feel to system dependent.
    So, I want to have a splash screen like the one that eclipse uses to begin the program. How would I do it?
    Thanks

    Did you search the forum using "splash screen" to find the other hundred threads that have asked this question before?

  • How to create multiple selection screens in reports

    How to create multiple selection screens in reports
    Thanks,
    Sridhar

    Ex: hope you will find an idea from the below example :
    SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
    PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
                CITYTO LIKE SPFLI-CITYFORM.
    SELECTION-SCREEN end OF BLOCK SEL1
    SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
    SELECTION-SCREEN INCLUDE BLOCKS SEL1.
    SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
    PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
                AIRPTO LIKE SPFLI-AIRPTO.
    SELECTION-SCREEN END OF BLOCK SEL2
    SELECTION-SCREEN END OF SCREEN 5000.
    INITIALIZATION.
    TIT1 = 'ITIES'.
    aT SELECTION-SCREEN.
    CASE SY-DYNNR.
    WHEN '0500'.
       MESSAGE W159(at) WITH 'SCREEN 500'.
    WHEN '1000'.
       MESSAGE W159(at) WITH 'SCREEN 1000'.
    ENDCASE.
    START-OF-SELECTION.
    TIT1 = 'CITIES FOR AIRPORTS'.
    TIT2 = 'AIRPORTS'.
    CALL SELECTION-SCREEN 500 STARTING AT 10 10.
    TIT1 = 'CITIES AGAIN'.
    CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

  • How to create a popup windown with javascript?

    Hi, every one,
    I made a jsp program. I know we can use win.open, win.close to create, to close a popup window with javascript. But I don't know how to create a popup window ,display some message on this window and there is a button on it for closing this window. Just like follows:
    int mark;
    if(mark==1){
         create popup window, display some message, there is a
    button and click it to close this window.
    } else {
         display error message.
    Any one can help me?
    Thanks in advance.
    peter

    Hi, bdtjdc,
    Thank you for your help and kindness.
    You know, I am a new one in javascript. So,
    1, I only know how to use alert(message) on current page and I don't know how use alert(message) on the next page because I
    need to pass some datas from current jsp page to next one.
    2, when I use the code you gave me as follows, there is no popup window and button:
    if(mark==1){
    %>
    <script language="JavaScript">
    message=message+'enter your message here...<br>';
    message=message+'<form name="form1"><input type="button" name="close" value="close window"
    onClick="window.close()"></form>';
    message='enter your message here...<br>';
    var actwin=window.open("","","menubar=0,width=300,height=300");
    actwin.document.write(message);
    actwin.document.close();
    actwin.focus();
    </script>
    <%
    } else {
    error message;
    if I use the code like this, We have the window and message on it, but there is no button on the window.
    if(mark==1){
    %>
    <script language="JavaScript">
    message='enter your message here...<br>';
    var actwin=window.open("","","menubar=0,width=300,height=300");
    actwin.document.write(message);
    actwin.document.close();
    actwin.focus();
    </script>
    <%
    } else {
         error message;
    What's the problem? Please.
    Thanks again.
    Peter

  • How to create delivery device for all users ?

    hi
    help needed ...
    i activated delivery tool
    but i dont know how to create email devices for all users
    is there any api / manual action
    obiee version : Oracle Business Intelligence 10.1.3.4.1
    thanks
    yuval

    Yuval..u need to setup SA System in RPD..
    refer http://oraclebizint.wordpress.com/2008/04/25/oracle-bi-ee-101332-sa-system-subject-area-autoloading-profiles-and-bursting/

  • How to create a popup window that shows detail information when press submi

    hi,all
    how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
    how to do achieve this ?help plz .
    best regards
    hlee
    Edited by: hlee on 2011-4-15 上午1:26

    hey,vee
    thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
    best regards
    hlee

  • How can we identify what are all user exits are there for sales orders,deli

    Dear All,
    How can we identify what are all user exits are there for sales orders,deliverys and invoices
    thanks
    nitchel v

    Hi Nitchel
    There are many ways to find out the user exits..
    For example for VA01.
    Goto Transaction ie VA01:
    goto System-- Status
    doubleclick on the program name ie SAPMV45A
    SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
    get the package name from here ie VA
    note the package(VA) and get back to main screen
    goto SMOD tcode  and click on find button in the package spec giv the package name ie VA and execute it
    you will find list of exits available
    check out the exit that suits ur requirement
    goto cmod and create a new project and implement in that user exit.
    You will get the following exits in SMOD..
    SDTRM001  Reschedule schedule lines without a new ATP check
    V45A0001  Determine alternative materials for product selection
    V45A0002  Predefine sold-to party in sales document
    V45A0003  Collector for customer function modulpool MV45A
    V45A0004  Copy packing proposal
    V45E0001  Update the purchase order from the sales order
    V45E0002  Data transfer in procurement elements (PRreq., assembly
    V45L0001  SD component supplier processing (customer enhancements
    V45P0001  SD customer function for cross-company code sales
    V45S0001  Update sales document from configuration
    V45S0003  MRP-relevance for incomplete configuration
    V45S0004  Effectivity type in sales order
    V45W0001  SD Service Management: Forward Contract Data to Item
    V46H0001  SD Customer functions for resource-related billing
    V60F0001  SD Billing plan (customer enhancement) diff. to billing
    For Delivery you will get .. here the package name will be VL.
    V02V0001  Sales area determination for stock transport order
    V02V0002  User exit for storage location determination
    V02V0003  User exit for gate + matl staging area determination (h
    V02V0004  User Exit for Staging Area Determination (Item)
    V50PSTAT  Delivery: Item Status Calculation
    V50Q0001  Delivery Monitor: User Exits for Filling Display Fields
    V50R0001  Collective processing for delivery creation
    V50R0002  Collective processing for delivery creation
    V50R0004  Calculation of Stock for POs for Shipping Due Date List
    V50S0001  User Exits for Delivery Processing
    V53C0001  Rough workload calculation in time per item
    V53C0002  W&S: RWE enhancement - shipping material type/time slot
    V53W0001  User exits for creating picking waves
    VMDE0001  Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002  Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003  Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004  Shipping Interface: Message SDPACK (Packing, Inbound)
    For Billing VF01..Package is VF..
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    Or another way is ..
    - Get the program name for that T-Code
    - Go to that program
    - In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
    And also you can check in the tables in SE16 for user exits..
    MODSAP - Stores SAP Enhancements
    MODSAPT - Stores SAP Enhancements - Short Texts
    MODACT - Stores Modifications
    And there are other ways as well , pls check the forum for this ,
    Regards,
    Vvieks
    Note : If you have any specific requirement then pls let us know , we will guide you

  • How to access the global data in user exit.

    Hi All,
    How to access the global data in user exit.
    the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
    this document number is not imported to the FM i needed to access for frther proceed.
    Thanks in advance.

    Hi,
    See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
    [SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
    This will help you to solve your problem.
    Regards
    Karthik D
    Edited by: Karthik D on Dec 2, 2008 4:18 PM

  • How can we find the list of user exits for a transaction

    hi all
    iam new in user exits please send the basic details
    how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
    regards
    jagadish

    hi,
    check the below links for userexits
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    FAQ's
    http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    http://www.easymarketplace.de/userexit.php
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    1. what is the defference between enhancement and user-exits?
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Re: difference between user exits & customer exits
    Some Questions ! Plz help...
    http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
    2. Difference between CMOD and SMOD?
    http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
    http://www.sap-img.com/abap.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
    check these links..
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    passing selet-option variable to subrouine...
    Finding the user-exits of a SAP transaction code
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com/*
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    if u want to find the function exit
    then check the below code
    REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
    TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
    TABLES : TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
    TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'SMOD'
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
    TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Exit Name',
    21 SY-VLINE ,
    22 'Description',
    95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
    SELECT SINGLE * FROM MODSAPT
    WHERE SPRSL = SY-LANGU AND
    NAME = JTAB-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 SY-VLINE,
    2 JTAB-OBJ_NAME HOTSPOT ON,
    21 SY-VLINE ,
    22 MODSAPT-MODTEXT,
    95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    or
    1. in se11, goto table MODSAP
    View table contents
    2. in Type field, enter 'E' (for function exit)
    3. For that tcode, u should know the program name.
    eg. SAPLLMOB
    4. then type SAPLLMOB and execute
    or
    REPORT z34331_user_exit .
    TABLES : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    START-OF-SELECTION.
    Validate Transaction Code
    SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir
    WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
    SELECT SINGLE * FROM tfdir
    WHERE pname = tstc-pgmna.
    SELECT SINGLE * FROM enlfdir
    WHERE funcname = tfdir-funcname.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'FUGR'
    AND obj_name = enlfdir-area.
    MOVE : tadir-devclass TO v_devclass.
    ENDIF.
    ENDIF.
    Find SAP Modifactions
    SELECT * FROM tadir
    INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object = 'SMOD'
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
    SELECT SINGLE * FROM modsapt
    WHERE sprsl = sy-langu AND
    name = jtab-obj_name.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 sy-vline,
    2 jtab-obj_name HOTSPOT ON,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    Regards,
    Naveen

  • How to get status profile (STSMA) in user exit ILOM0001

    Hi ABAPers,
    I am currently working on user exit ILOM0001 (Check before saving a functional location) and need to get information about status profile (STSMA). I have checked parameters that is imported into this user exit (DATA_IFLO, DATA_IFLO_OLD, DATA_IFLOS) and none of them have STSMA.
    Could anybody help me how to get this field STSMA into user exit ILOM0001?
    Appreciate it.
    Thanks
    Regards
    Hadi

    Dear Kolla,
    Really appreciate your answer, but
    I don't want to generate or make settlement receiver.
    I was building a script in user exit IW010009,
    And the issue is I can not capture the content of field settlement receiver.
    If we want to capture screen field, ex. equnr, we can use structure CAUFVD,
    when i see the technical detail in this field, the structure for settlement is DKOBR, field EMPGE, but i cannot call it on debug.
    Kindly need your help on this issue.

  • Regarding how to find out a program is User Exit/executable

    Hi,
    Can anybody tell me how can we find wether a particular program is used in executable program (or) user exit program?
    One thing we can find out is wether the program type is 'I' or 'R' etc..
    Thanks in advance.
    Thanks,
    Deep.

    Hi...
    See the following links..
    it helps you a lot..
    how can we C the USER_EXITS in Z programs
    how can we find the list of user exits for a transaction
    How to find the active user exits in my client
    How to find user exits for a transaction
    Hope it helps you...
    Let me know if u have any more doubt...
    Reward points if useful......
    Suresh.......

  • How to find the list of all user exits modified by the users

    How to find the list of all user exits using by in R3

    Hi Mohamed
    You use Solution Manager to do the comparison for you.  There are some nice features that will highlight all your customised coding.  Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
    Rgards
    Carl.

  • How can we find all the available  user-exits in sap without using SMOD?.

    How can we find all the available  user-exits in sap without using SMOD?.

    Hi,
    Please check this links for user exits list.
    http://www.planetsap.com/Userexit_List.htm
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/ab038.htm
    Regards,
    Ferry Lianto

Maybe you are looking for