How to create a Print Preset

I am migrating from a Windows environment to a mac. I have also updated my software from PS CS3 to Elements 12. In the Windows environment when printing my note cards all I had to do was click on print, which brought up a dialog box. I then clicked on page setup which brought me to an area where I selected a preset which had all of the settings needed to print my note cards. How do I duplicate this in Elements 12 and the mac environment?
Thx

In the OS X window that opens after you click Print in the PSE print window, click the Show Details button to expand the window and make your choices for paper, ink, etc, then click the Presets menu at the top of the window and choose Save Current Settings as Preset:

Similar Messages

  • How to create and print contact sheet using photoshop elements 10?

    how to create and print contact sheet with photoshop 10?

    Which operating system are you using?
    On a windows system you can use the Organizer
    http://www.dummies.com/how-to/content/how-to-print-contact-sheets-in-photoshop-elements-.h tml
    On a Mac, File>Contact Sheet II within the pse 10 editor

  • How can I change print presets?

    Between the last time I used InDesign (CS3) and now, I upgraded my Mac system software to OS 10.9.5 AND replaced my old printer (which had died) with a new one.  Now when I open a doc in InDesign CS3, I can work with it just fine, but can't print it.  Initially, the PRINT command would cause the beach ball to spin and the ID to crash.  When I looked deeper, I find that ID is still retaining my old printer's information as the default printer, even though I deleted it from the system (I not only deleted the old printer via System Preferences for printing, I actually RESET the printer preferences).  My new printer is the only printer (thus the default printer).  However, ID doesn't see it.  When I look at ID's FILE/PRINT PRESETS menu and click "DEFINE," it shows me that the preset [default] printer is my old printer.  If I then click on "New..." ID crashes; if I click on "Edit..." ID crashes.
    How can I get ID to see/recognize my new printer?  Is there an outdated list of printers somewhere within CS3 that doesn't include my new printer?
    Any help will be appreciated.
    Many thanks

    First of all, thank you both for all your help.
    I found and trashed the Version 5.0 files in both the cache and preferences folders, and when I launched ID again and checked the print presets, lo and behold, there was my new printer’s description shown as the !  My joy was short-lived, however, because the “Print…” command still resulted in nothing more than a spinning beach ball and eventual ID crash.  I trashed the newly created Version 5.0 folders again, AND, for good measure, did the keyboard approach for replacing ID preferences, too.  Still a no-go for printing.  So, something else is going on that prevents ID from printing my docs.
    It finally occurred to me to export the ID doc as a PDF, and I WAS able to print that from Reader, so that’s a work-around I can live with, I think.  I’m hesitant to uninstall everything, then reinstall from my ancient CS3 disks and upgrade from the website… it’s just so much work and it might not improve my situation.  If the PDF option fails to continue to do the trick, maybe I’ll tackle the re-install.  If I did as much graphics work as I used to a few years ago, it would be worth upgrading, but…
    For now, you HAVE answered my original question, and I thank you again for the effort.

  • How to create a Printer List in Forms 4.5

    How can I create a Printer list on Forms 4.5 to show all
    available printers?
    Thanks.
    null

    I fear there is no direct solution.
    May be this is a work-around:
    1. Apply the older built-in: Display_item. You can't disable the item with display_item, but you can change the visual attribute and show the user that this item should not be checked.
    2. To be shure that the user doesn't ignore this "disable", you need a trigger, which resets the item to the proper value after an illegal change.

  • How to create a print format in SAP

    Hi,
    I dont know if this is the right forum to ask this, but I have not done this for a long time. Does anybody know how to maintain a print format such as "X_65_200" that you use when printing a report in SAP? I'm trying to create a format that will use a Legal size paper. Useful answer will be rewarded.
    Thanks,
    Ricky
    Message was edited by: Ricky Orea

    Hi,
    The Print formats are maintained in TSP1D Table.. it is usually done by the BASIS folks..
    Regards,
    Suresh Datti

  • How to create a printer wich start direct adobe

    Hi,
    i have create an printer with devices type PDF1 and host spool access method M (E-Mail to Receiver/Owner).
    this printer creates an email wit PDF-attachment. This works OK.
    Question: is it possible to create an printer wich doesn't send an email. This printer shell the PDF-output
    download and start adobe with this output.
    Is this possible?
    Thanks.
    Regards Dieter

    Hi Dieter,
    You might have more success if you get this post moved to one of the basis forums, this is much more their kind of thing.
    Anyway, I guess in theory you can do what you want, as this is pretty much how Access method F (Frontend printing) works, but creating your own Access method may not be that simple.
    My gut feel is this is not possible with the Access methods delivered as standard.
    Regards,
    Nick

  • How to find old print presets

    Hello, Due to a problem with Indesign CC 2014 (latest version) I deleted all the preferences on start up (by holding down 4 keys).
    However, my print presets have disappeared – I'm not sure where they're kept in order to replace them. Any ideas?
    My other thought was to open older version of Indesign CS6 and CS5 – but they no longer appear to be there either.
    I was hoping to enter time machine and reinstate them – what is the file called – and where is it actually located please....
    Thanks

    I was hoping to enter time machine and reinstate them
    If Time Machine was backing up your user folder you should be able to go back and get the ID prefs you trashed, reinstall them, save the print presets, and then trash the prefs again.
    So get this folder from the backup:
    Disk▸ Users ▸ userfolder ▸ Library ▸ Preferences ▸ Adobe InDesign ▸ Version 10.0
    Quit InDesign and replace the new Version 10.0 folder that was created when you reset the prefs with the backup and restart ID. Assuming your problem didn't prevent ID from launching, you should now be able to save a copy of your presets via File>Print Presets>Define... selecting all of the presets in the list and clicking the Save button.

  • How to create a cropping preset?

    Hello,
    So I am new to using Premiere and am having some difficulties locating things (if they even exist.)
    I create videos for YouTube and on my endslate I have a "Last Episode" which has my last video cropped smaller. When I used Vegas I was able to save this crop as a preset so that when I made my next video i could just select the preset and it would resize the video exactly the same and in the same position.
    Can this be done on Premiere, if so how?
    Example on Vegas: http://gyazo.com/304244898c9bce384dc549fe4f7ab865

    No sure if you are cropping (cutting of the edges) or just scaling the entire image down (like a picture in picture)
    In the Effects palet you will find the Crop tool.
    Apply the effect then right click on the effect in the Effect Controls and save as preset.
    You can also save fixed effect (everything in the Motion, Opacaity and Time remapping) as a preset.
    Done the same way as describe above.

  • [IDS CS2] How can I load printer presets & pdf presets

    To create compliant artwork, for different media we use predefined printer and pdf presets, in InDesign.
    My question is simple, in InDesign you can load these preset files via a load function in the menu, is there a similar function to load these presets into InDesign server?
    Or do I have to something like the example printpreferences script for InDesign server, setting all properties manually.
    Erik Bruinsma

    Whow, if I had only know before...
    I think I wasted a whole day, trying all kinds of complex scripts, while it could be done in two lines :-(
    I almost had a working solution with Dirk's tip, but this is way easier.
    Thanx

  • How to create merged print files

    i now create document using mail merge, print and send the document through the mail.
    can i create a pdf and email to clients?

    Using JAR Files to Deploy
    http://developer.java.sun.com/developer/onlineTraining/Programming/BasicJava2/jar.html#jar

  • How to create 2 print buttons on a sql report ?

    hello,
    i work on apex 4 and database 11GR2, i configure bipublisher for advanced printing.
    On a sql report i want to have an excel Button and a Pdf button with redirect URL.
    I don't know how to specify in the URL the format output.
    I see in the help
    "use the output format derived from item option and include the item name and value in your Print URL."
    but i look for an example of URL.
    Best regards
    Jean marc

    So, you have to specify a hidden item which contains the value, then specify in print attributes the item name (mine is P5000_TYPE)
    Then you would have button redirect URLs of:
    javascript:redirect('f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R1483125430108678:::P5000_TYPE:PDF') ;and
    javascript:redirect('f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R1483125430108678:::P5000_TYPE:XLS')
    to print in pdf and xls respectively.
    Ta,
    Trent
    Edited by: trent on Dec 10, 2010 11:29 PM

  • How to save CS3 print presets?

    Greetings,
    Here is my issue: When I go to the print dialog and choose save preset, I make the changes ( I want a tabloid preset that selects tray 4 from our Splash server/Docucolor 12 setup) but when I select the "Printer" button and choose "Paper Feed" and switch it from Auto select to Tray 4, it won't retain my Tray 4 setting. It remembers everything else. This causes the print job to go to the error queue with the error "no 11x17 paper trays installed" - when there are and paper is in there.
    I want to be able to share this preset with the other designers in the office.
    Mac OS 10.4.11/Adobe CS3 Design Standard
    Any thoughts?

    Are the optional trays listed in the printer setup for your printer? Maybe they need to be activated.

  • LR3 How to create a border preset

    Hi
    Is it possible to create a standard border for my images I upload to Flickr.   I have the Flickr LR3 export set up for a particular size. Sometimes I have to create a border in PS CS5 before exporting to Flickr. Its a bit of a pain so wondered if somehow I could create a standard sort of preset which I could select for my Flickr uploading
    Thanks

    For that I would look at Mogrify

  • How to create audio unit presets

    When used with some applications, some audio units show presets.
    But there is apparently no way to create, save and load presets, for example for the AU GraphicEq...
    Is there a solution to do so ?
    Thanks
    N.
    PowerMac G4 1x1,25 GHz   Mac OS X (10.4.3)  

    Nicholas P,
    Welcome to apple discussions!
    I'm not really sure about the answer to your question. It would be nice. I would think that if some applications display presets and others don't, its more a matter of whether the program contains the code to display and apply presets. Nonetheless, I thought this might interest you. Good Luck!
    --Justin S.

  • How to create drop shadow preset?

    I have now spent an entire day searching and trying to create a preset for fcpx. On most of the effects I use, i have the option to save as a preset. BUT with the drop shadow effect, I doesn't.
    On the instructions in the help section for editing a FCPX effect, it claims you need to either right click or control click the effect in the media browser, and then select "open a copy in motion". This works on any effect BUT Drop shadow! lol.
    So I then with my limited knowledge of Motion 5, tried to create a FCPX effect on my own. I created a new FCPX Effect, Then in the HUD I applied the drop shadow with the settings I needed, and saved it. Then in FCPX I applied it to the track, but nothing happened. I am lost, and need help. I ahve to apply a drop shadow with 50% opacity, and 30% for blur to over 600 clips in over a month. I can't do it manually and then adjust the parameters manually for each one. PLEASE HELP!
    Chris

    The Drop Shadow is actually coded with FXPlug, it is not a straigth Motion template.  Any effect or template that is coded can't be opened in Motion.
    When you create your own, you need to publish the parameters you need access to.
    I think what you need to look at is the Paste Attributes function.  Select a clip in your Timeline that you've applied the Drop Shadow to and have tweaked it.  Command-C to copy it.  Select all the other clips at once, in the Edit menu select "Paste Attributes", then specify only the Drop Shadow effect.  Poof, done.

Maybe you are looking for