How to Create a process instance from already deployed PD

After deploying the process definition created in jDeveloper,
I can access it through EJB services. From the processMetadataService, we can get the initiatable processes.
processMetadataService.getInitiatableProcesses(ibpmContextForAuthenticatedUser);
I am able to see the process id and all other details of the processes.
But when i am using
instanceManagementService.createProcessInstanceTask(bpmContextForAuthenticatedUser, initiatableProcesses.get(2).getProcessId());
I am getting the exception as follows. what may be the reason and how to resolve it?
Exception in thread "main" javax.ejb.EJBException: EJB Exception: ; nested exception is:
     java.lang.RuntimeException: bad composite child dn: 343; nested exception is: java.lang.RuntimeException: bad composite child dn: 343
java.lang.RuntimeException: bad composite child dn: 343
     at oracle.soa.management.CompositeChildDN.<init>(CompositeChildDN.java:67)
     at oracle.soa.management.ComponentDN.<init>(ComponentDN.java:38)
     at oracle.bpm.services.instancemanagement.impl.InstanceManagementService.createProcessInstanceTask(InstanceManagementService.java:207)
     at sun.reflect.GeneratedMethodAccessor10053.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy232.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean.createProcessInstanceTask(InstanceManagementServiceBean.java:112)
     at sun.reflect.GeneratedMethodAccessor10052.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy258.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
javax.ejb.EJBException: EJB Exception: ; nested exception is:
     java.lang.RuntimeException: bad composite child dn: 343; nested exception is: java.lang.RuntimeException: bad composite child dn: 343
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.unwrapRemoteException(RemoteBusinessIntfProxy.java:121)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:96)
     at $Proxy16.createProcessInstanceTask(Unknown Source)
     at com.test.TestSample.main(TestSample.java:77)
Caused by: java.lang.RuntimeException: bad composite child dn: 343
     at oracle.soa.management.CompositeChildDN.<init>(CompositeChildDN.java:67)
     at oracle.soa.management.ComponentDN.<init>(ComponentDN.java:38)
     at oracle.bpm.services.instancemanagement.impl.InstanceManagementService.createProcessInstanceTask(InstanceManagementService.java:207)
     at sun.reflect.GeneratedMethodAccessor10053.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy232.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean.createProcessInstanceTask(InstanceManagementServiceBean.java:112)
     at sun.reflect.GeneratedMethodAccessor10052.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy258.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl.createProcessInstanceTask(Unknown Source)
     at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Edited by: 967671 on Oct 25, 2012 7:58 AM

Similar Messages

How to create a process instance from PAPI Web Services

Hi,
I use Jdev 11g to create ADF(PAPI web service) to create new instances of BPM processes running in BPM Standalone (10g). However, I do not know how to write the code.
Could any people paste the sample code for me?
Thank you very much!
papiWebServicePort.processCreateInstance(String, String, Holder<ArgumentBean>, Holder<instanceInfoBean>)

import java.net.MalformedURLException;
import java.rmi.RemoteException;
import javax.xml.rpc.ServiceException;
import com.bea.albpm.PapiWebService.OperationException;
public class CreateInstances {
     public static void main(String[] args) throws MalformedURLException, ServiceException, OperationException, RemoteException {
          java.net.URL url = null;
          org.apache.axis.EngineConfiguration config = null;
          com.bea.albpm.PapiWebService.PapiWebServicePortBindingStub binding = null;
          com.bea.albpm.PapiWebService.InstanceInfoBean value = null;
          //String processId = "/Proceso1";
          //String processId = "/ActividadesExternas";
          String processId = "/PAPIWS";
          String argumentsSetName = "BeginIn";
          //Binding
          //url = new java.net.URL("http", "localhost", 8686, "/papiws/PapiWebServiceEndpoint");
          url = new java.net.URL("http", "localhost", 8585, "/papiws/PapiWebServiceEndpoint");
          config = new org.apache.axis.configuration.FileProvider("client_deploy.wsdd");
binding = (com.bea.albpm.PapiWebService.PapiWebServicePortBindingStub) new com.bea.albpm.PapiWebService.PapiWebService_ServiceLocator(config).getPapiWebServicePort(url);
binding.setTimeout(60000);
//Arguments
com.bea.albpm.PapiWebService.ArgumentsBeanArgumentsEntry argumentsBeanArgumentsEntry[] = new com.bea.albpm.PapiWebService.ArgumentsBeanArgumentsEntry[1];
argumentsBeanArgumentsEntry[0] = new com.bea.albpm.PapiWebService.ArgumentsBeanArgumentsEntry();
argumentsBeanArgumentsEntry[0].setKey("entradaArg");
argumentsBeanArgumentsEntry[0].setValue("Instancia creada de forma externa mediante PAPI-WS 2.0");
com.bea.albpm.PapiWebService.ArgumentsBean argumentsBean = new com.bea.albpm.PapiWebService.ArgumentsBean(argumentsBeanArgumentsEntry);
com.bea.albpm.PapiWebService.holders.ArgumentsBeanHolder argumentsBeanHolder = new com.bea.albpm.PapiWebService.holders.ArgumentsBeanHolder(argumentsBean);
//Create instance
value = binding.processCreateInstance(processId, argumentsSetName, argumentsBeanHolder);
System.out.println("Created instance -> InstanceInfo.id = " + value.getId());
     }

How to create BPM process instances?

I need to use java to create new BPM 11.1.1.5 process instances.
How to connect to bpm and use API?
Can anyone paste detail code sources?

Thanks Evolution...i actually missed out this lookup....
Now provisioning is working fine for other resource object also...
I have one more doubts regarding child table...i am using the same child table UD_ADUSRC for this resource object also and when i assigned any group membership thru this child table (in AD User1) it gives me DOBJ.insert failed error. I have checked the tasks (+Add user to group, Remove user from group, update user to group+) and all are referring the correct attrs (as in AD User). There is mapping defined in Resource Object and Process definition for Reconciliation also but recon any user with group membership is also giving me error...
can't we use one child form in two process forms ? any other configuration which i should check?
I am using the same look up for Reconciliation mapping attrs for both the resource objects (AD User and AD User1)....

How to create resized image instance from an existing image

It looks like the image class does not provide a possibility to create a resized instance. Image#impl_getURL() would be good enough to create a resized instance of an existing image - but could be removed in a future release. So what's the preferred way if I have an image object only - there's no information about the based image resource.

You can resize an image on loading using one of the constructors that takes requestedWidth and requestedHeight parameters. This is useful for preserving memory when (for example) needing to display a large number of thumbnails.
Additionally, the ImageView class defines resizing functionality for the view of an Image. So you can load the full Image, then display one or more resized versions in ImageView(s).
If you need, you can retrieve an Image object representing the ImageView by calling snapshot(...) on the ImageView; for most use cases the ImageView itself will be all you need.

How to create a standby redolog from rac to non rac ??

Hi,
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
pls help

854393 wrote:
Thanks Shivanandha,
(maximum number of logfiles for each thread + 1) * maximum number of threads
Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
Hope This helps.

How to create an asm instance manaually? oracle 11gr2.

env: oracle 11gr2 os: hpux or aix single machine , not rac.
question:how to create an asm instance manaually?? diskgroup,listener,db ,they can be resigistered to crs??
can anyone give me document about it?

Hi,
This is a simple answer:
Automatic Storage Management (ASM)
ASM was a new storage option introduced with Oracle Database 10gR1 that provides the services of a filesystem, logical volume manager, and software RAID in a platform-independent manner. ASM can stripe and mirror your disks, allow disks to be added or removed while the database is under load, and automatically balance I/O to remove "hot spots." It also supports direct and asynchronous I/O and implements the Oracle Data Manager API (simplified I/O system call interface) introduced in Oracle9i.
ASM is not a general-purpose filesystem and can be used only for Oracle data files, redo logs, and control files. Files in ASM can be created and named automatically by the database (by use of the Oracle Managed Files feature) or manually by the DBA. Because the files stored in ASM are not accessible to the operating system, the only way to perform backup and recovery operations on databases that use ASM files is through Recovery Manager (RMAN).
ASM is implemented as a separate Oracle instance that must be up if other databases are to be able to access it. Memory requirements for ASM are light: only 64 MB for most systems.
Installing ASM
On Linux platforms, ASM can use raw devices or devices managed via the ASMLib interface. Oracle recommends ASMLib over raw devices for ease-of-use and performance reasons. ASMLib 2.0 is available for free download from OTN. This section walks through the process of configuring a simple ASM instance by using ASMLib 2.0 and building a database that uses ASM for disk storage.
Determine Which Version of ASMLib You Need
ASMLib 2.0 is delivered as a set of three Linux packages:
* oracleasmlib-2.0 - the ASM libraries
* oracleasm-support-2.0 - utilities needed to administer ASMLib
* oracleasm - a kernel module for the ASM library
Each Linux distribution has its own set of ASMLib 2.0 packages, and within each distribution, each kernel version has a corresponding oracleasm package. The following paragraphs describe how to determine which set of packages you need.
First, determine which kernel you are using by logging in as root and running the following command:
uname -rm
Ex:
# uname -rm
2.6.9-22.ELsmp i686
The example shows that this is a 2.6.9-22 kernel for an SMP (multiprocessor) box using Intel i686 CPUs.
Use this information to find the correct ASMLib packages on OTN:
1. Point your Web browser to http://www.oracle.com/technology/tech/linux/asmlib/index.html
2. Select the link for your version of Linux.
3. Download the oracleasmlib and oracleasm-support packages for your version of Linux
4. Download the oracleasm package corresponding to your kernel. In the example above, the oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm package was used.
Next, install the packages by executing the following command as root:
rpm -Uvh oracleasm-kernel_version-asmlib_version.cpu_type.rpm \
oracleasmlib-asmlib_version.cpu_type.rpm \
oracleasm-support-asmlib_version.cpu_type.rpm
Ex:
# rpm -Uvh \
> oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm \
> oracleasmlib-2.0.1-1.i386.rpm \
> oracleasm-support-2.0.1-1.i386.rpm
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [ 33%]
2:oracleasm-2.6.9-22.ELsm########################################### [ 67%]
3:oracleasmlib ########################################### [100%]
Configuring ASMLib
Before using ASMLib, you must run a configuration script to prepare the driver. Run the following command as root, and answer the prompts as shown in the example below.
# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Creating /dev/oracleasm mount point: [ OK ]
Loading module "oracleasm": [ OK ]
Mounting ASMlib driver filesystem: [ OK ]
Scanning system for ASM disks: [ OK ]
Next you tell the ASM driver which disks you want it to use. Oracle recommends that each disk contain a single partition for the entire disk. See Partitioning the Disks at the beginning of this section for an example of creating disk partitions.
You mark disks for use by ASMLib by running the following command as root:
/etc/init.d/oracleasm createdisk DISK_NAME device_name
Tip: Enter the DISK_NAME in UPPERCASE letters.
Ex:
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1
Marking disk "/dev/sdb1" as an ASM disk: [ OK ]
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdc1
Marking disk "/dev/sdc1" as an ASM disk: [ OK ]
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdd1
Marking disk "/dev/sdd1" as an ASM disk: [ OK ]
Verify that ASMLib has marked the disks:
# /etc/init.d/oracleasm listdisks
VOL1
VOL2
VOL3
Create the ASM Instance
ASM runs as a separate Oracle instance which can be created and configured using the Oracle Universal Installer. Now that ASMLib is installed and the disks are marked for use, you can create an ASM instance.
Log in as oracle and start runInstaller:
$ ./runInstaller
1. Select Installation Method
* Select Advanced Installation
* Click on Next
2. Specify Inventory Directory and Credentials
* Inventory Directory: /u01/app/oracle/oraInventory
* Operating System group name: oinstall
* Click on Next
3. Select Installation Type
* Select Enterprise Edition
* Click on Next
4. Specify Home Details
* Name: OraDB10gASM
* Path: /u01/app/oracle/product/10.2.0/asm
Note:Oracle recommends using a different ORACLE_HOME for ASM than the ORACLE_HOME used for the database for ease of administration.
* Click on Next
5. Product-specific Prerequisite Checks
* If you've been following the steps in this guide, all the checks should pass without difficulty. If one or more checks fail, correct the problem before proceeding.
* Click on Next
6. Select Configuration Option
* Select Configure Automatic Storage Management (ASM)
* Enter the ASM SYS password and confirm
* Click on Next
7. Configure Automatic Storage Management
* Disk Group Name: DATA
* Redundancy
- High mirrors data twice.
- Normal mirrors data once. This is the default.
- External does not mirror data within ASM. This is typically used if an external RAID array is providing redundancy.
* Add Disks
The disks you configured for use with ASMLib are listed as Candidate Disks. Select each disk you wish to include in the disk group.
* Click on Next
8. Summary
* A summary of the products being installed is presented.
* Click on Install.
9. Execute Configuration Scripts
* At the end of the installation, a pop up window will appear indicating scripts that need to be run as root. Login as root and run the indicated scripts.
* Click on OK when finished.
10. Configuration Assistants
* The Oracle Net, Oracle Database, and iSQL*Plus configuration assistants will run automatically
11. End of Installation
* Make note of the URLs presented in the summary, and click on Exit when ready.
12. Congratulations! Your new Oracle ASM Instance is up and ready for use.
Kind regards
Mohamed

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create new OC4J instance in AS 10.1.3 with BC4J- and ADF-Libraries

Hi
I have done all the steps mentioned in this thread:
How to create new OC4J instance in AS 10.1.3
However, the new created OC4J instance obviously misses some libraries. If I deploy my Application to this OC4J I get an internal error: Class not found: oracle.jbo.JboException.
The same Application runs well in the "home" Instance.
What is the trick, to create a new OC4J instance, which more or less behaves the same way as the "home" instances (and especially has all the same libraries)?
Thanks for your help
Frank Brandstetter

I encountered this last month. I definitely agree that it is a glaring omission to not have "Create Like" functionality when instantiating new containers. Here's my notes on the manual steps required after using createinstance to create the fresh container. Not too bad. I've been deploying ADF applications to the new container with no problems after this.
==============
The default (home) OC4J container is pre-configured for ADF 10.1.3 applications; however, when $ORACLE_HOME/bin/createinstance is used to create additional containers, these containers are not configured automatically to host ADF 10.1.3 applications.
I followed these manual steps:
1. $ORACLE_HOME/j2ee/home/config/server.xml defines three shared libraries that "install" the needed JARs for Oracle ADF applications in your application server instance (container). Note that "install" does not necessarily mean available to applications (see Step 2). Copy the three shared library element definitions to the <application-server> element of your new container (in server.xml).
<shared-library name="oracle.expression-evaluator" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/jlib/commons-el.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/oracle-el.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jsp-el-api.jar"/>
</shared-library>
<shared-library name="adf.oracle.domain" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
     <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
     <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
     <import-shared-library name="oracle.xml"/>
     <import-shared-library name="oracle.jdbc"/>
     <import-shared-library name="oracle.cache"/>
     <import-shared-library name="oracle.dms"/>
     <import-shared-library name="oracle.sqlj"/>
     <import-shared-library name="oracle.toplink"/>
     <import-shared-library name="oracle.ws.core"/>
     <import-shared-library name="oracle.ws.client"/>
     <import-shared-library name="oracle.xml.security"/>
     <import-shared-library name="oracle.ws.security"/>
     <import-shared-library name="oracle.ws.reliability"/>
     <import-shared-library name="oracle.jwsdl"/>
     <import-shared-library name="oracle.http.client"/>
     <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
<shared-library name="adf.generic.domain" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/bc4jdomgnrc.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
     <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
     <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
     <import-shared-library name="oracle.xml"/>
     <import-shared-library name="oracle.jdbc"/>
     <import-shared-library name="oracle.cache"/>
     <import-shared-library name="oracle.dms"/>
     <import-shared-library name="oracle.sqlj"/>
     <import-shared-library name="oracle.toplink"/>
     <import-shared-library name="oracle.ws.core"/>
     <import-shared-library name="oracle.ws.client"/>
     <import-shared-library name="oracle.xml.security"/>
     <import-shared-library name="oracle.ws.security"/>
     <import-shared-library name="oracle.ws.reliability"/>
     <import-shared-library name="oracle.jwsdl"/>
     <import-shared-library name="oracle.http.client"/>
     <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
2. To make the necessary ADF and JSF support libraries available to your deployed ADF application, the default application (that your ADF application and the majority of applications should inherit from) should explicitly import the shared library in the <orion-application> element of $ORACLE_HOME/j2ee/<your container>/config/application.xml.
<imported-shared-libraries>
     <import-shared-library name="adf.oracle.domain"/>
</imported-shared-libraries>
Note: the adf.oracle.domain shared library imports several other shared libraries including oracle.expression-evaluator.

How to move the process chain from Unassigned node to a new node in 3.5?

Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja

Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram

OBPM Studio 10g R3: Create new process instance via PAPI

Hi folks,
I used JDeveloper to generate Java stubs off the PAPI WSDL. This works great and I'm able to list Processes similar to the bundled JAX-WS example just fine. Now I'd like to take it to the next level and create a process instance. I really appreciate your guidance on how to do that.
Currently my process has a Global Creation Activity (screenflow) and the BeginIn mapping goes to an Automatic Activity.
Questions:
1) Is it possible to create a process instance in my case given that I have a Global Creation Activity ? Or if not, what changes do I need to make?
2) Does anyone have any Java code examples for invoking the PAPI process instance creation code?
In my case, I found a method in the stub that accepts three parameters - the process Id (String), an "ArgumentSetBean name (String), and an ArgumentBean, but I'm not sure what to fill in. :-)
Thanks everyone!

Hi,
See if this helps -->
import fuego.papi.InstanceInfo;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import fuego.papi.Arguments;
import fuego.papi.BatchOperationException;
public class PAPIExample {
     public PAPIExample() {}
     public static void main(String[] args) throws OperationException, BatchOperationException {
          FuegoService fuegoServ = new FuegoService();
          ProcessServiceSession fuegoSession = fuegoServ.createSessionWithUsernameAndPassword("papi", "password");
          String processName = "/TestPAPI";
          Arguments arguments = Arguments.create();
          arguments.putArgument("argName", "GuessWhoIsHere");
          // First Way
          fuegoSession.processCreateInstance(processName, "In", arguments);
          // Second Way
          String globalActivity = "GlobalCreation";
          InstanceInfo instInfo = fuegoSession.activityExecuteApplication(globalActivity, processName, arguments);
          instInfo = fuegoSession.instanceRefresh(instInfo);
          fuegoSession.close();
Edited by: Anup300684 on Jan 21, 2009 1:35 AM

How to create a Sales order from multiple quotations?

Hi All,
Please tell me how to create one sales order from multiple quotations?
Regards,
Maddy

Hello Maddy,
To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
It will give you a pop-up to choose your quotations item while creating the sales order.
Some per-requisites are there:
1. Copy control should be maintained between your quotation and sales order.
2. Quotation should be error free and should have the status "Released"
3. Sold to party and Organization should be same in both transaction.
For more information you can check the below link:
Processing Quotations - Sales Transactions - SAP Library
Best Regards,
Dinesh

Service Manager 9.21: How to create a new instance of scautolistener and assign a port to it.

Hi,
2 instances of scautolistener are already running and i want to create a new instance of scautolistener.
The sm.cfg file entry of scautolistener instances are:
sm -scautolistener:12670 -debugscauto -log:..\logs\scauto.log
sm -scautolistener:12690 -log:..\logs\scsmtp.log
Please guide me as how to create a new instance of scautolistener.

first, you cannot create instances of methods. but you can create instances of classes (==objects).
the algorithm for primes does not work yet (its your work) but i inserted the code to create your object.
import java.math.*;
public class IsPrime {
public boolean isPrime1(int arg){
for(int e = 2; e < arg; e++){
int remainder=arg%e;
if(remainder==0){
System.out.println("This number is not a prime number");
break;
else {
System.out.println("This number is a prime number");
break;
return true;
public static void main(String[] args){
System.out.println(args.length);
if (args.length>1){
System.out.println("Sorry you can only enter one number");
else{
String sNum =args[0];
int iNum=Integer.parseInt(sNum);
IsPrime myPrimesObject = new IsPrime(); // here is your object
if (myPrimesObject.IsPrime1(iNum)==true)
System.out.println("is a prime");else System.out.println("is not a prime");
}

How to create a web instance in weblogic?

          Dear All,
          I want to know how to create a web instance in weblogic server?
          Furthermore , where can i get more info. about the weblogic
          server , including how to use those examples pages provided from
          weblogic server, sampling of procedure to config each service ,
          e.g EJB , JSDB , JTA , etc., .
          thanks,
          chris


Read the new JSP1.1 and servlet 2.2 specific for more information on
          this. You can deploy several jsp files in a single war file on a server.
          -- Prasad
          chris lee wrote:
          > Dear Prasad Peddada
          > Thank you for your helpful information.
          > I've read the page you have mentioned, I want to know
          > if I've serval pages written in jsp, how should I do if I
          > want to access those pages under the weblogic server?
          > Furthermore, Does the 'applicantion' mention in the paragraph
          > is the web instance I mentioned before?
          >
          > Thanks,
          > chris
          >
          > Prasad Peddada <[email protected]> wrote:
          > >http://edocs.beasys.com/wls/docs60/index.html
          > >
          > >-- Prasad
          > >
          > >chris lee wrote:
          > >
          > >> Dear All,
          > >> I want to know how to create a web instance in weblogic
          > >server?
          > >> Furthermore , where can i get more info. about the weblogic
          > >> server , including how to use those examples pages provided
          > >from
          > >> weblogic server, sampling of procedure to config each
          > >service ,
          > >> e.g EJB , JSDB , JTA , etc., .
          > >>
          > >> thanks,
          > >> chris
          > >
          Cheers
          - Prasad

How to call j2me emulator instance from a java program?

hi,
how to call j2me emulator instance from a java program?
i tried public void startApp(){
try{
platformRequest("tel:+5550000");
}catch(Exception e){
e.printStackTrace();
from a j2me midlet itself,
but it gave illegal access exception.
do i need any hardware phone connected to my pc?
please help.

http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
import java.util.*;
public class OpenExplorer{
public static void main(String args[]){
     new OpenExplorer();
public OpenExplorer(){
     try{
     String command = "explorer C:";
     // or String command = "cmd /c explorer C:";
     Runtime runtime = Runtime.getRuntime();
     Process process = runtime.exec(command);
     int exitVal = process.waitFor();
     System.out.println("Exit Value: " + exitVal);
     } catch(Exception e){
     e.printStackTrace();
}

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How to Create a process instance from already deployed PD

Similar Messages

Maybe you are looking for