How to create a Product Grouping and manage multiples?

How I can create a Product Grouping with 3 pieces of a product + 2 pieces of another product and ensure that customer can only order in multiples (6+4, 9+6, 12+8, etc.) and not for example 4+3?
Regards,
Francesco

Hi Madhavi,
You also need to assign the hierarchy to the application Product in Tcode: COMM_PRAPPLCAT.
There we have two settings,
1. Assign hierarchy to application.
   Make a new entry. Choose application Product and assign the hierarchy you
   have created.
2. Assign hierarchy to product type.
   In case you wish to have a separate hierarchy for each product type ( Material,
   Service, Warranty etc) than use this setting.
   Make new entry. Choose a product type and assign hierarchy to it.
Wish the information is useful. If it helps, do reward with points.
Regards,
Shalini Chauhan

Similar Messages

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

How to create a security group to manage a Distribution list in exchange 2013

Hi folks,
We have AD synced with Online Exchange 2013. Dirsync is installed on AD. We would like to create a security group for a Distribution list(for instance: distribution list name is [email protected] and it is managed via a security group named "abc" ).
How can this be achieved? I do see an option under Online Exchange console using browser-> Groups to create a new security group but it doesn't allow me to add the group created in AD-instead it ask us to create a new one. If we create a new one in Exchange
online console- will it publish to our local AD?

Hi TR,
Thank you for your question.
Are there any errors when we could not add group which is in local AD.
When we could not add group which was created In AD, there are following options we could check:
If current user who logon Exchange server has enough permission to add it
The connection between Exchange server and AD
If we create a new DG in Exchange online, it will be published to local AD.
We could run the following command to create DG for abc.com:
New-DistributionGroup -Name "abc" -Alias abc -Type "Security" -MemberJoinRestriction open
We could refer to the following link to learn more about distribution group:
https://technet.microsoft.com/en-us/library/bb124513%28v=exchg.150%29.aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

How to create a custom report and include multiple extended CRM database?

I have created a number of CRM databas extensions and applied all there fields to my contacts and cases.
I might have for example:
- Additional address details
- Business information
- Quote Details
- Trade Referees
I know how to run a custom report and that I can select any one of these extra CRM databases as a filter and included them in the report. Is there a way though to add more than one (preferrably all) of the extra CRM databases to the report?
The onely ways I can see it work is by either include all fields in one extra CRM database (not ideal) or bu running multiple reports and merge them somehow in Excel.
Is there another way that I am not aware off?
Thanks for your help,
Jerun

Hi Jerun,
There's no way to do that. You'll need to run separate reports and merge them in Excel.
-m

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

Procedure on Product Group and Versioning in MD61

Hi,
Can anybody send me a step-by-step procedure on how to execute the product group and versioning function in MD61at ching_pb @ yahoo com?
Tnx.
Regards

Dear Ching,
Are you working in an SAP version ECC 5.0 or 6.0?Then follow these steps.
1.Create a material using material type PROD in MM01.
2.Assign the materials to the product group in MC86.
3.Create a plan for this product group in MC81 for an inactive version.
4.Disaggregate the plan or create a production plan in MC76 for the same inactive version.
5.Transfer the requirement's to demand management in MC76 from inactive version to active version 00.
Check and revert back.
Regards
Mangalraj.S

How do you create hierarchical folders in Forms Central to organize and manage multiple forms?

How do you create hierarchical folders in Forms Central to organize and manage multiple forms?

Hi,
We do not support this feature right now. Someone else has posted this to our ideas forum, here - http://forums.adobe.com/ideas/1587. I suggest you vote for it, because we look at the popular ideas to help guide us on what new features work on.
Thanks,
Todd

How to create a product catalog in crm(by the end user of the system)?

how can we an end user create a product catalog?
what is the diff b/n prod cat and prod?
we download the prod from r/3.
how we get the prod cat done in crm for the customers and consumers and how it is done?
thank you,

hi
first of all we need to look at what is catalog management before proceding with product and product catalog.
You use this business scenario to create a centralized product catalog that contains product descriptions, multimedia objects, pricing, and associated literature. The catalog enables quick and easy customer access to timely and personalized product information, structured in such a way that most meets your customers needs.
Product catalogs are implemented in sales processes and are of particular importance in CRM Web Channel for presenting your products in the Web shop.
difference between the product and product catalog
this is not the thing that product and product catalog are completely different entity.
Product catalog :   A grouping together of products from your product master data, in a structured hierarchy.
You use product catalogs to group together products to present them in the Web shop, Interaction Center, or in other forms of media, for example printed format or CD-ROM.
You can create various catalogs for your products in the product master and use them according to a validity date. For example, you could use certain products for the summer season, and other products for the winter season.
You can also tailor your product catalog to meet other needs by creating catalog variants. For example, you can create a catalog in English with the prices displayed in US Dollars.
so by above definition it is very much clear that products are actually assign to the catalog,i will give you an analogy that museum is a kind of catalog and you add different pictures to the museum,in the same way you add product to the product catalog according to the acatlog variant.
Now how you assign product to product catalog
Product Assignment
You assign products manually or automatically to a catalog area, depending on the catalog type. The product ID, product description, and status of all products is displayed, as is the information as to whether the item contains accessories or if it is a configurable product.
Prerequisites
You have created products in your product master in SAP CRM under Accounts and Products
Process
You select a catalog area in your product catalog, and edit the item list by assigning products to the area.
Manual Assignment
You can assign products manually on an individual basis or by copying a catalog area. You tend to choose manual product assignment for marketing-oriented catalogs that are subjected to editorial controls.
      Individual assignment
      In this case you select the catalog area in which the product should be assigned, manually search for the product in the product master, and assign it to the area.
      Copying items from catalog areas
      You select an area or subarea from another catalog and copy it to your new catalog. The system copies all products from the copied area to the new catalog, as long as they belong to the distribution chain assigned to the target catalog variant. From these products, you can then manually determine which products from the copied area you want to keep and which items you wish to delete.
The following is true for manually assigned products:
      You can activate or deactivate items on an individual basis.
      You can edit the list of accessories for manually assigned products. The system determines which accessories are maintained for the product in the product master and displays them in the item area of the catalog. You select which accessories should be displayed for the product in the catalog and activate them.
      Manually assigned products can be included or removed from catalog views on an individual basis.
Automatic Assignment
You can assign products automatically to a catalog by transferring product hierarchies from your product master to the catalog areas. The categories, items, attributes, and documents contained in the product hierarchy are copied to the new catalog.
You use automatic product assignment mainly for functional catalogs, where products can be copied with very few changes, from the product categories of the product master. It enables a standardized characterization of your products in the catalog.
The following is true for products assigned to the catalog using product hierarchy transfer:
      Product categories which make up the hierarchies become catalog areas in the catalog.
      Product categories in the product hierarchy must be assigned to the distribution chain to which the target catalog variant is assigned. Otherwise the category is not transferred. The same applies to the items, texts, and documents assigned to the category.
      Items are always active and cannot be individually activated or deactivated.
      Accessories maintained for transferred product in the product master are automatically included and displayed in the catalog.
      Transferred items cannot be individually included in catalog views or removed from them. Instead all items of the hierarchy are always contained in the view.
      Lists of characteristics for transferred categories and items can be automatically created when transferring product hierarchies. The transferred values are included in the item overview of the product catalog.
how to create a product catalog
just have a look at this link
http://help.sap.com/saphelp_crm60/helpdata/en/1c/12b2dc57d644d19ea3a5c4156f904f/frameset.htm
your query regarding the products you have uploaded from the R3,now as above i said how you maintain and create the product catalog ,you just assign the products uploaded from the R3 to the product cataloag created in CRM.
more detail info you can see in these links
http://help.sap.com/saphelp_crm60/helpdata/en/91/be9642e5ef0731e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/27f09d25da5a68e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/037716cfc604a9e10000000a114a6b/frameset.htm
if you read carefuly what i have said,it is pretty easy to implement ,you will see it yourself
guess it will help you
do revert back in case of any doubt
best regards
ashish

JavaCode to create IT Resource, Group and UserForm in OIM

Hi,
Is it possible to create the ITResource, Group and UserForm in OIM using java code(java apis).
Has anyone tried creating.
Regards,
Manju

ya , it is very simple. you can use the APIs for creating group, form etc,.
Use this link [APIs Guide|http://74.125.153.132/search?q=cache:Rkz-kX1n6sMJ:download-east.oracle.com/docs/cd/B32386_01/generic.902/b32144.pdf+guide+oracle+identity+manager+API&cd=1&hl=en&ct=clnk&gl=in]
[Create Group|http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcGroupOperationsIntf.html]
Use Create Group API to create group and use tcFormDefinitionOperation and tcFormInstanceOperationsIntf APi to create form etc

How to create Bi product production order?

How to create production order that has same contain but creates two products X and Y. For example when we produce oil,wax got created as bi product.
Please suggest how to do that?

Hi,
Please refer threads:
Multiple Finished Goods in a Single Production Order
Wastage Management in Production Process
Thanks & Regards,
Nagarajan

Error While creating a Product Group

Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.

Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram

Error while creating the product group by MC84

Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.

Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

How to create a Custom UIView and How to instantiate that ?

How to create a Custom UIView and How to instantiate that ?
In Flash, all we need to do is create a MovieClip and assign it a class name in the library.
Instantiation is a simple matter of:
var newclass:CustomClass = new CustomClass({initialization_data:1652});
addChild(newclass);
At this current point in time, my understanding of creating custom UIView in xcode is limited to the understanding that you have to:
1: Forward declare the class in the header.
2:
]newclass *CustomClass in @interface's {}
and THEN
@property (nonatomic, retain) newclass *CustomClass;
in the header file also.
3: Nib initialization in the implementation file in viewDidLoad and do "addSubview".
==============================
Based on my limited understanding at this point, I find the need to
@property (nonatomic, retain) newclass *CustomClass;
at the header somewhat limiting...as it denotes you must know how many instance you will create in the application before hand.
I believe I am wrong here, hence, my question is, how do I add custom UIViews with initialization codes in real time ?

hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create a Product Grouping and manage multiples?

Similar Messages

Maybe you are looking for