How to create a second OracleBIApplication in WebLogic for OBIEE 11g?

I want to create a second OracleBIApplication in WebLogic for OBIEE 11g. The default one is called "coreapplication". I can create a new one but it doesn't show up in Enterprise Manager. Anyone can help?

I have been trying to create a second OracleBIApplicatino in WebLogic for OBIEE 11g without success. I don't want to end up installing it twice as it is going to consume a lot of resources and also because I want to have a single WebLogic Domain. Has anyone faced the same situation?
What about deploying the "analytics" web application as a new web application with a different context-root (e.g. analytics_test)? I am also trying but I can't make it work. Anyone available to help?

Similar Messages

  • HT204053 how do i create a second apple id not for use in itunes but just email

    Would appreciate it if anyone could tell me how to create a second apple ID, that I can use just for email and no itunes or anything like that.
    TIA
    Saint George

    Sign out of the Touch and then sign in Using Your Apple ID...
    No need to create a New ID...

  • How to create a web instance in weblogic?

              Dear All,
              I want to know how to create a web instance in weblogic server?
              Furthermore , where can i get more info. about the weblogic
              server , including how to use those examples pages provided from
              weblogic server, sampling of procedure to config each service ,
              e.g EJB , JSDB , JTA , etc., .
              thanks,
              chris
              

    Read the new JSP1.1 and servlet 2.2 specific for more information on
              this. You can deploy several jsp files in a single war file on a server.
              -- Prasad
              chris lee wrote:
              > Dear Prasad Peddada
              > Thank you for your helpful information.
              > I've read the page you have mentioned, I want to know
              > if I've serval pages written in jsp, how should I do if I
              > want to access those pages under the weblogic server?
              > Furthermore, Does the 'applicantion' mention in the paragraph
              > is the web instance I mentioned before?
              >
              > Thanks,
              > chris
              >
              > Prasad Peddada <[email protected]> wrote:
              > >http://edocs.beasys.com/wls/docs60/index.html
              > >
              > >-- Prasad
              > >
              > >chris lee wrote:
              > >
              > >> Dear All,
              > >> I want to know how to create a web instance in weblogic
              > >server?
              > >> Furthermore , where can i get more info. about the weblogic
              > >> server , including how to use those examples pages provided
              > >from
              > >> weblogic server, sampling of procedure to config each
              > >service ,
              > >> e.g EJB , JSDB , JTA , etc., .
              > >>
              > >> thanks,
              > >> chris
              > >
              Cheers
              - Prasad
              

  • How to create a server through WLST  ( Weblogic Scripting Tool ) ?

    How to create a server through WLST ( Weblogic Scripting Tool ) ?
    Thanks in advance...
    Sanjay

    Hi Murugesh,
    Thanks a lot for you reply..
    I was able to create a server using create(). Is it possible to clone a server ?
    When i create a server following tags is added to config.xml
    <server>
    <name>testServer_lab1</name>
    <listen-port>43000</listen-port>
    </server>
    And if i do a clone through admin console, following is added to config.xml
    <server>
    <name>testServer2_lab1</name>
    <machine xsi:nil="true"></machine>
    <listen-port>7001</listen-port>
    <cluster xsi:nil="true"></cluster>
    <listen-address></listen-address>
    <graceful-shutdown-timeout>120</graceful-shutdown-timeout>
    </server>
    If incase, cloning is not possible through WLST, can i add following
    <machine xsi:nil="true"></machine>
    <listen-port>7001</listen-port>
    <cluster xsi:nil="true"></cluster>
    <listen-address></listen-address>
    <graceful-shutdown-timeout>120</graceful-shutdown-timeout>
    under <server> tag which is created through WLST ?
    I am using 9.2 version.
    Regards
    Sanjay

  • Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

    Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
    Exemple:
    Table1
    Cliente name:
    John
    Client number:
    12345
    Survay number of negative answers:
    3
    Table2
    Questions and answers that were negative:
    Question: How much time where you waiting
    Avaluation: 3 (from 1 to 10)
    Answer: They only called me 1 mouth later
    Can you please help me?

    Hi,
    Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
    In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
    References:
    Subreports (Report Builder and SSRS)
    Add a Subreport and Parameters (Report Builder and SSRS)
    If I have any misunderstanding, please feel free to contact me.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE

    HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE.
    Requiremenst is as follows.
    Year ,Qtr columns in first prompt.Based on selection on these prompts second prompt should display corresponding prompts
    Second prompt will have Month ,Week and Day columns.Second prompt should be hidden and based on first prompt selection second prompt should display with constraint based on first prompt.
    Any help would be highly appriciated!!!

    hi,
    Using Guided navigation it is possible,
    Please refer the below links.
    http://gerardnico.com/wiki/dat/obiee/dashboard_prompt_1_eq_0
    http://businessdecisionsystems.com/blog/?p=448
    Hope this help's
    Thanks,
    Satya

  • How to create a custom task in SRM for the standard task

    Hi Gurus,
    How to create a custom task in SRM for the standard task  eg: TS10407929
    regards,
    George.

    from PFTC itself. Same.

  • How To Create A Technical And Business Systems For Web AS ABAP ???

    Hi Experts,
    How To Create A Technical And Business Systems For Web AS ABAP ???
    Please Let me Know All the Step-By-Step Process to Create ????
    Points Will be Given
    Regards
    Khanna

    Hi Sumit,
    When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
    So I got An Entry for the Technical System for XI System.
    Now i Deleted that and Executed RZ70 in R/3.
    When I Executed RZ70, I got this Error.
    <b> "RFC Call failed: Error Opening an RFC Connection "</b>.
    Now I am Unable to see Any Technical System  Under Web As ABAP. It's Showing Empty Now.
    Please Let me know
    Regards
    Khanna

  • How to create distribution list in workflow? for  sending mail or work-item

    Hi,
    How to create distribution list in workflow? for  sending mail or work-item to multiple users.
    Regards,
    Surjith

    Hi Surjith,
    A.Working with Distribution Lists Creating a Distribution List.
    1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
    2.Then click on the distribution list in Businees Workplace.
    say create Name = WF_Vliste
    folder Name = WF_distributor
    3.distribution list content tab
    Enter Recipient (SAP User ID)
    B.Wrkflow Builder
    Find out the dialig step in which u want to use distribution list
    Use workflow Rule 30000012 (SWX_READ_DLI).
    Maintain the binding from workflow container to rule container.
    Just pass the name of the distribution list from WF to Rule container.
    Regards
    Sagar S

  • How to create Characteristic group in CO-PA for assessment purpose

    Hi,
    Can anybody guide me as how to create Characteristic group in CO-PA for assessment of cost center balance to CO-PA?
    Thanks,
    Bijay

    You need to be more specific in your request - are you looking for a sender, or a receiver grouping? Which characteristic? Is it to be all the values in a characteristic, or is it to be groups of those characteristics.
    Have a look at the setting up of hierarchies for characteristics in COPA master data.

  • How to create new requisitioner in sap mm for raising purchase requisition?

    How to create new requisitioner in sap mm for raising purchase requisition?

    Hi Dear,
    There is some link will help you to create Purchase Requisition and other MM Documents.
    http://www.docstoc.com/docs/11307932/SAP-MM-Manual-Create-Purchase-Requistion
    http://www.r3.duke.edu/training/stepbystep/#purch
    http://sapdocs.info/sap/materials-management-2/download-sap-purchasing-user-training-ppt-material/
    Regards
    Aamir

  • How to create a single 'not null ' validation for all the items in a page ?

    Hi everyone ,
    how to create a single 'not null ' validation for all the items in a page ? I have many textfields . Instead of creating 'not null' validation for each item , I would like to create a a single validation control that will serve the purpose
    Thanks & Regards
    Umer

    Nice1 wrote:
    bob , as u said I have done the following :
    1) under create button , there are 9 items and for each item I have set Required to 'Yes'
    2) under delete button , there is 1 item and have set Required to 'Yes' for the item
    3) defined page validation for 9 items under 'create ' button and have set it to fire when 'create ' button clicked
    4) defined page validation for 1 item under 'delete ' button and have set it to fire when 'delete ' button clicked
    now , when I click 'create' button it even shows for the item under 'Delete ' button that it is a required itemSorry, I didn't see this note. The required template won't work, there is no way to attach it to the button.
    The best solution is as the reply a couple replies up
    Create 2 page type validations as a PL/SQL with code
    1st validation
    :P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL  include all 9 items
    Set the When Button Pressed to the CREATE button
    2nd validation
    :P1_ITEM10 IS NOT NULL
    Set the When Button Pressed to the DELETE buttonI think that's going to be the easiest way to do it.
    Edited by: Bob37 on Apr 27, 2012 12:02 PM

  • How to create external content type in sharepoint for salesforce account

    Can anybody help me on How to create external content type in sharepoint for salesforce account.
    I wanto upload documents to a document library which should sync with accounts in saleforce.
    thanks in advance

    Hi,
    The following materials would be helpful:
    Tutorial: Access Salesforce Leads in SharePoint through an External List
    http://geekswithblogs.net/dataintegration/archive/2014/02/03/tutorial-access-salesforce-leads-in-sharepoint-through-an-external-list.aspx
    Salesforce SharePoint Integration – Best Practices
    http://rainforce.walkme.com/salesforce-sharepoint-integration-best-practices/#.VFxra3mKAeE
    If you want to upload documents to SharePoint document library from the Saleforce, we can also customize your own web service using SharePont .Net Client Object Model or REST to achieve it.
    Best Regards 
    Dennis Guo
    TechNet Community Support

  • Webinar (Aug 11): How to create Cross-Platform Automated GUI Tests for Java Apps

    Join Squish expert, Amanda Burma, and learn how to create cross-platform automated GUI tests for your Java applications!
    Register here (multiple time slots)
    August 11th 2014
    Duration: 30 minutes plus Q & A
    This webinar will cover:
    General Squish for Java overview
    Automating BDD Scenarios
    Executing Cross-Platform Automated GUI Tests
    Interacting with Java application objects, properties & API
    See you there!
    Unable to attend? Register and we'll send links to future events and access to our webinar archive following the event.
    Webinar schedule
    Learn more about Squish
    Evaluate froglogic squish

    <property name="messaging.client.jar.path" value="Location in your local drive" />
    <property name="messaging.client.jar.name" value="nameOfYourFile.jar" />

  • How to create a second page?

    Hi. I want to create a second page and then call it from code and maybe with some transition effects when it is made current. Can you show me how? Thanks

    Hi,If you need to create second page in your project then select project right click and add new item .
    If you need to go second page when press click btn in Main/first page use-
    NavigationService.Navigate(new Uri("/SecondPage.xaml", UriKind.Relative));If you need to transition effects when it is made current find following link for helpful-http://www.geekchamp.com/articles/windows-phone-7-navigation-transitions-step-by-step-guidehttp://stackoverflow.com/questions/13440133/windows-phone-8-how-to-animate-page-navigationhttp://stackoverflow.com/questions/17021854/page-turning-transitions-for-windows-phone-8-appsDon't forget to mark the right answer and vote up if helps you.

Maybe you are looking for

  • Using a select clause in the column formula in an Analysis

    Hi all, Is there a function or syntax that I can use to simulate a "SELECT" clause in the column formula of an Analysis? What I am trying to achieve is displaying a measure from a specific fact record into the current record. For example, if the curr

  • Cisco ISE disabled all internal Network users

    Hi All, Somehow, this morning when we checked on the ISE, all the IP phone users along with the internal users are disabled. We have disabled the password policy to disable the accounts if password is not changed. Our version is 1.2 and no patches. C

  • Condition field in XL Reporter Get Other Data function

    I want to use the XL Reporter "Get Other Data" function to get data from a file not in the current Business Partner dimension  BPA.  Using the SalesPerson code SlpCode, I want to get the SalesPerson Name, SlpName. What is the value for the condition

  • Swapping mother boards for Satellite A30

    I am in North america. I have a Satellite A30 laptop model number PSA30C-00YS5 and i was wondering if i could swap the mother board for a UK origin computer. Model number PSA33E-87YX4-EN

  • Extend Range of Linksys WRE-54G using Airport Express?

    I have a Linksys WRT-54G as my wireless router. I am currently extending its range across my house using a Linksys Range Extender WRE-54G. I want to connect a stereo and a PS3 in the basement to the network, using my Apple Airport Express. When I con