How to create a security group to manage a Distribution list in exchange 2013
Hi folks,
We have AD synced with Online Exchange 2013. Dirsync is installed on AD. We would like to create a security group for a Distribution list(for instance: distribution list name is [email protected] and it is managed via a security group named "abc" ).
How can this be achieved? I do see an option under Online Exchange console using browser-> Groups to create a new security group but it doesn't allow me to add the group created in AD-instead it ask us to create a new one. If we create a new one in Exchange
online console- will it publish to our local AD?
Hi TR,
Thank you for your question.
Are there any errors when we could not add group which is in local AD.
When we could not add group which was created In AD, there are following options we could check:
If current user who logon Exchange server has enough permission to add it
The connection between Exchange server and AD
If we create a new DG in Exchange online, it will be published to local AD.
We could run the following command to create DG for abc.com:
New-DistributionGroup -Name "abc" -Alias abc -Type "Security" -MemberJoinRestriction open
We could refer to the following link to learn more about distribution group:
https://technet.microsoft.com/en-us/library/bb124513%28v=exchg.150%29.aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support
Similar Messages
-
How to create a Product Grouping and manage multiples?
How I can create a Product Grouping with 3 pieces of a product + 2 pieces of another product and ensure that customer can only order in multiples (6+4, 9+6, 12+8, etc.) and not for example 4+3?
Regards,
FrancescoHi Madhavi,
You also need to assign the hierarchy to the application Product in Tcode: COMM_PRAPPLCAT.
There we have two settings,
1. Assign hierarchy to application.
Make a new entry. Choose application Product and assign the hierarchy you
have created.
2. Assign hierarchy to product type.
In case you wish to have a separate hierarchy for each product type ( Material,
Service, Warranty etc) than use this setting.
Make new entry. Choose a product type and assign hierarchy to it.
Wish the information is useful. If it helps, do reward with points.
Regards,
Shalini Chauhan -
How to create new storage group and mailbox database on exchange 2007 CCR
Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
How to create users and groups using WLST Offline with Weblogic 8.1.4
How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary tools available online for security breaks and editing of PDF document
I put all the security options but still there are tools to break the security (even password) leading to editing of document
Need to avoid any such situationIf the document is important, and there is something to be gained by modifying it - then someone will just make a new copy of it (e.g. print and scan, screen capture), and make a new document, then change it.
If protecting the integrity of the document - proving it is unchanged - is the thing, look at digital signatures. Forget security, the signed file can be freely edited, but the signature will always show it is changed. -
How to create Infoset&user group query--(query report)
Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .Ggoto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu -
How to create a backend administrator content management system?
How to create a backend administrator content management system using SQLyog515 and JSP only.
Can give suggestions?
Thanks,
JSPnewbie*
Message was edited by:
Liting_JSPnewbieHave a look at Perch
Perch - The really little content management system (CMS) - Perch
It requires a php/mysql database to run but the tables and set up are all automated through the Perch set up files - you just need a server that runs php/mysql. It works on the same principals as the one Ben suggested but its a lot cheaper for a one off site - however if you intend to build more CMS driven sites the one Ben suggested might be more financially viable in the long run.
The nice thing about Perch CMS is it fits in with your workflow unlike Wordpress/Joomla where you have to jump through hoops to change anything.
Plus I think you can take Perch for a spin before buying (or at least you could when I was exploring CMSs) - you can't with Power CMS. I never investigated Power CMS beacuse I would not buy something before trying it. It looks good but it might be a bit dated as it doesnt seem to be in continuous develoment. Perch is in a constant state of development and the guys are working to make it better on a daily basis. -
How to create a function group (step by step)?
I would like to know how to create a function group, step by step.
step 1 do....
step 2 do ...also,
Go to SE80 for creating a function group.
Also have a look at below link.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
i.e.
TCODE - SE80
Choose - Function Group ,it wil ask to create..
Create and then activate..give a name starting with Z .
Other way is go to tcode SE37.
In the menu,there is a option in sub menu for creating function group.
Just create it by clicking that and give names starting with z or y. -
How to Create a Facebook group subadmin where he cant remove actual admin
how to Create a Facebook group subadmin where he cant remove actual admin
This topic first appeared in the Spiceworks CommunityHi
Run pfcg and try to go to change with your restricted settings then click on the error message to get the table entries in performance assistant. Put those in prgn_cust via sm30.
Then use 22 instead of 02 in newly called object S_USER_SAS.
Make sure you have at least one user with * in that object for full access across the landscape before transporting the table.
Cheers
David
Edited by: David Berry on Oct 23, 2010 10:25 AM
Edited by: David Berry on Oct 23, 2010 10:26 AM
Forgot to say - when you have the new object value 22 in your restricted role and assigned to test user prior to moving to PROD the only way to go into change mode is to first go to the USER tab and then press change. Anywhere else and you'll still get the 'you are not authorised' message.
Edited by: David Berry on Oct 25, 2010 8:04 PM -
Creating a security group for S/Mime cert auto-enrolment
We currently have auto-enrolment rights for an Exchange User cert granted to Domain Users. In our environment this is generating more than 50,000 failed requests each week by service accounts which don't have an email address.
I would like to create a security group of users with an email address, and grant enrolment rights on the CA to that group.
I have tried the following script to create such a group, however it's way too slow to be of any use (ours is a large enterprise):
add-module activedirectoryGet-ADGroup -filter {name -eq "SMime Users"} | ForEach-Object {dsget group -members $_.distinguishedname | dsmod group $_.distinguishedname -rmmbr}Get-ADUser -filter {emailaddress -like "*"} | ForEach-Object {Add-ADGroupMember "SMime Users" -Members $_.SamAccountName}
Any ideas on a way to bulk add users with an email address to a group? Or another way to achieve the same result?On Thu, 6 Feb 2014 19:20:37 +0000, Alen Williams wrote:
We currently have auto-enrolment rights for an Exchange User cert granted to Domain Users. In our environment this is generating more than 50,000 failed requests each week by service accounts which don't have an email address.
I would like to create a security group of users with an email address, and grant enrolment rights on the CA to that group.
I have tried the following script to create such a group, however it's way too slow to be of any use (ours is a large enterprise):
add-module activedirectoryGet-ADGroup -filter {name -eq "SMime Users"} | ForEach-Object {dsget group -members $_.distinguishedname | dsmod group $_.distinguishedname -rmmbr}Get-ADUser -filter {emailaddress -like "*"} | ForEach-Object {Add-ADGroupMember "SMime Users" -Members $_.SamAccountName}
Any ideas on a way to bulk add users with an email address to a group? Or another way to achieve the same result?
Although this group is going to be used for certificate enrollment this
really isn't the right forum for your question. You should repost to either
an Active Directory forum or to one dedicated to scripting or Powershell.
Paul Adare - FIM CM MVP
urbi et IP -- axelm in <mode=pope> -
How to create a field group.
Hi all,
Can anyone please explain how to create a field group for few fields?
My requirement is i want to Create a specific fieldgroup for maintenance of the fields for the contacts TAB on the customer master
KNVK-NAME1
KNVK-NAMEV
KNVK-ABTNR
KNVK-PAFKT
KNVK-BRYTH
How todo this? please anyone can explain the steps.
MohanaIf you are creating these fields with Business Data Tool Set.
Then you will have field group and fields.
Field are attached to field groups,
Field groups are attached to view
Views are attached to Section
Sections are attached screen : you are calling as a tab
Regards,
Shiva Kumar
removed by moderator
Edited by: Jan Stallkamp on Dec 19, 2008 2:33 PM -
TS2370 how to create iphone contact group
does anyone know how to create a contact group on the iphone?
thanks.Read this:
http://www.ehow.com/how_5937574_make-contact-group-iphone.html -
Receiving Group Text : How do i see who else is in the distribution list???
Receiving Group Text : How do i see who else is in the distribution list???
other phones seem to have this, how can i see this?
Post relates to: Pre p100eww (Sprint)Use his/her Apple ID for iMessage on your phone...you'll actually receive the messages in real time.
-
Hey Scripting Guys,
I have been in and out of Powershell last few years, not that great at it tbh !!! I'm looking for advice on how I can as in Title, Create a Powershell script to Scan Active Directory Attributes for Country and Department ,Then add to Group then add to Distribution
list based on Region/Country
I was thinking along the lines of get-aduser -LDAPFilter "(department=SALES France) and adding a where clause for country.
Any help would be great.
DecSo I have tried a few variations but get errors on both
get-aduser -LDAPFilter "(&(department=SALES)(c=us))" | Add-ADPrincipalGroupMembership -MemberOf "testgroup"
get-aduser -LDAPFilter "(&(department=SALES)(c=fr))" | Add-ADGroupMember -identity "testgroup"
Add-ADPrincipalGroupMembership : Object reference not set to an instance of an
object.
At line:1 char:86
+ get-aduser -LDAPFilter "(&(department=SALES)(c=fr))" | Add-ADPrincipalGroupMe
mbership <<<< -MemberOf "testgroup"
+ CategoryInfo : NotSpecified: (:) [Add-ADPrincipalGroupMembershi
p], NullReferenceException
+ FullyQualifiedErrorId : Object reference not set to an instance of an ob
ject.,Microsoft.ActiveDirectory.Management.Commands.AddADPrincipalGroupMem
bership
Maybe you are looking for
-
Shared Library no Longer Working Properly
I have my iTunes library on my mac. For some time (well over a year) I have been sharing my iTunes library on my network, with 2 windows XP machine. This used to work perfectly but now (I think after the 7.7 update) it only works for a few minutes, a
-
User exit/ enhancement for billdoc creation using external billdoc number
good day experts, my requirement is to allow assignment of external billing document. we have no problem with sales document and outbound delivery number. but for billing document, it seems no possible without user exit. I want to know the user exit
-
My itunes account has been block due to i forgot the answer of my security question
My itunes account has been block due to i forgot the answer of my security question
-
Account inaccessible .. operation does not support device
iMac, Core Duo 20" 2Gig RAM Since update to 10.4.10 using combo update... trying to log on to a guest account crashes the system to black screen with white system prompt: '...operation not supported by device.' I hold the power button for 5 seconds t
-
has anyone installed solaris 10 on t60 with windows vista running? its failing on http://forum.java.sun.com/thread.jspa?threadID=5137822 step 23. please help .. any help would be greatly appreciated. Thank You Ben