How to Create a Separate N and G Network?

I have been reading post after post, and none of them gives enough explicit detail for me to figure this out. I want to create 2 separate networks in my home, one just 802.11n the other 802.11g. The n is for internet and time capsule with my MacBook Pro, the g for my iPhone. I have a Time Capsule, an Airport Express and a DSL modem.
Right now I have the DSL modem connected to the TC and it set for 802.11n only @ 5 Ghz. The Airport Express is connected via an ethernet cable to the TC. What settings must I change in the Airport Express "Manual Setup" section to ensure no problems?
I have heard of turning of DHCP and something about SSID. I have no idea what those are. I have a static IP address from AT&T.
Thanks so much!

I've read a number of posts on this topic and also read the TC manual. I am still having a problem getting this to work so I am hoping someone can provide a step by step based on the following info:
I have a cable modem connected to the TC using ethernet.
I want my Macbook Air and Apple TV to connect to the TC wirelessly at 5Mhz. I called the TC "Home_5Mhz" with WPA2 Personal active.
I have a b/g AEBS connected to the TC using ethernet. I called the AEBS "Home" with WPA2 Personal active.
I want to connect my iPhone, iMac G5 and Powerbook G4 wirelessly to the AEBS b/g network.
I want all of my devices to have access to the Internet at the highest speed possible without degrading 802.11n performance on the TC.
The problem I'm having: Access to the Internet from the iMac, Macbook Air, and Apple TV is sporadic. Sometimes it works, most of the time is doesn't. The TC is set to find a channel automatically; the AEBS is using Channel 11. The two computers seem to recognize the TC as a storage device and I can back up to it. It is very slow backing up the iMac G5's full 250gb hard drive (supposed to be, right?). It's the Internet connection that doesn't appear to be working consistently. By that I mean I get the Safari web page saying that I'm not connected to the Internet (page with Diagnostic button). Running Diagnostics has not resolved the problem. I have tried resetting both the TC and AEBS to factory specs and starting from scratch but the problem persists.
I'm pretty sure it's just a simple setting I have yet to identify, I just can't figure out which one it is. Currently the AEBS is in bridge mode allowing b/g devices to connect to the Internet. "n" devices cannot most of the time unless I change the AEBS from bridge mode to share an IP address. Then I can connect the "n" devices but I think it's happening via the AEBS not the TC.
Any suggestions or step by step info (link?) would be greatly appreciated and I offer my thanks in advance.
Bill

Similar Messages

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts ?

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?

Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account.

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to create a Custom UIView and How to instantiate that ?

How to create a Custom UIView and How to instantiate that ?
In Flash, all we need to do is create a MovieClip and assign it a class name in the library.
Instantiation is a simple matter of:
var newclass:CustomClass = new CustomClass({initialization_data:1652});
addChild(newclass);
At this current point in time, my understanding of creating custom UIView in xcode is limited to the understanding that you have to:
1: Forward declare the class in the header.
2:
]newclass *CustomClass in @interface's {}
and THEN
@property (nonatomic, retain) newclass *CustomClass;
in the header file also.
3: Nib initialization in the implementation file in viewDidLoad and do "addSubview".
==============================
Based on my limited understanding at this point, I find the need to
@property (nonatomic, retain) newclass *CustomClass;
at the header somewhat limiting...as it denotes you must know how many instance you will create in the application before hand.
I believe I am wrong here, hence, my question is, how do I add custom UIViews with initialization codes in real time ?

hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian

How to create ship to party and sold to party for DC10 during sales order ?

Hello all:
When creating sales order for a material in VA01 with sales Org 1000,
distribution channel 10, division 00
The system does not give me any Ship to Party and Sold to Party with the above combination
How to create ship to party and sold to party with the above combination (Plant 1000,
sales org 1000, distribution channel 10, during creation of a sales order
Ironically, when creating material master for a material with a material type KMAT, plant 1000
sales org 1000, the only distribution channel is populating in the input help (F4) is 10
For which no ship to party neither sold to party is maintained in sales order creation
Thanks in Advance!!

Dear Eshwer
It is bcoz, the said account groups (Sold To Party and Ship To Party) are not created in the sales area 1000 / 10 / 00.
To create a customer master, you have to go to XD01, select the Account Group, Company Code and the respective Sales Area and execute. In the Customer Master, you have three tabs, viz.General Data where you have give address details of the customer, then in Control Data, you have to assign the respective Recon Account and in Sales Area Data, you have to maintain the customer's sales related details. Once you give all these datas and save the data, a customer code will be displayed at the bottom.
Now go to VA01, input the sale order type and the sales area and execute.
thanks
G. Lakshmipathi

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to create a new 'id and type rect' in _edge.js from your stage in javascript

how to create a new 'id and type rect' in _edge.js from your stage in javaScript

_edge.js is an object file their is any way to create ?
if i run this script "alert(Stage);" in creationComplete
i will get
i have little idea on object example
var obj = {car: "honda city"};
obj.bikes = {model: "suzuki"};
alert(obj.bikes.model);
Anyway thank u vivekuma for ur kind reply!

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to create authority check object and assign to ztcode which is of modu

Dear ,
how to create authority check object and assign to ztcode which is of custom module pool program.its urgent kindly help points rewarded.

Manoj,
You can check with your Basis team to create authorisation object and assigining tcodes to the user profiles.
K.Kiran.

How to Create a Unix Agent and data stage adapter

Hi Gurus,
I am new to this tool. We have installed trail version of tidal scheduler tool. Kindly let me know how to create a unix agent and data stage adapter using some screen shots. Also please let me know is it possible to create agents on trail version
Thanks,
Saravanan Viswanathan

edburns wrote:
Can someone please tell me how to create a Unix Group on Leopard and how to add myself to that group?
Ed
man dseditgroupshould help. Look particularly at the examples.

How to create a new Characteristic and Key figure ?

Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay

How to create a af:treeTable and/or a af:tree

Can someone tell me how to create a af:treeTable and/or a af:tree using JDev11g. I have looked in the JDev HowTos, Tutorials, etc. and I have not found an example.
THANKS for any help - Casey
Edited by: casey on Feb 8, 2009 8:37 PM
Please ignore this thread - it is a DUH question - getting too late in the day -

Since you are not giving a use case you can start by reading [Chris Muirs blog|http://one-size-doesnt-fit-all.blogspot.com/2007/05/back-to-programming-programmatic-adf.html] or take a look at the rich Client Demo here.
An other way to get more info is to google af:tree!
Timo

How to create a moveable holiday and assign it to a Holiday Calendar?

Hi Experts,
How to create a moveable holiday and assign it to a Holiday Calendar?
Regards,
Tomesh

Hi Tomesh,
Floating Holidays are created for holidays for which the dates are not decided for the years ahead or dates may changes each year or when a unusual holiday is just introducted for one year.
1.Use transaction SCAL or use the IMG path to the holiday calender.
2.Create a new holiday and select the option " is a movable holiday".
3.Fill in the " public holiday attribute tab" and hit insert date.
4.Fill in the year, month and date for the floating holiday or you could do multiple years at the same time if dates are know and hit create.
5. The new public holiday is created.
6.Assign the new holiday to the holiday calender, while saving you will get a message that " an irregular public holiday is created and being save hit ok. This message will appear in cases when the holiday calender validity and the validity of the floating holiday are matching.
Generate the work schedules and check if th holiday appear in the work schedule.
Award point if useful.
Thanks
Gita

How to create a new UoM and assigning it to characteristic?

Hi,
How to create a new UoM and assigning it to characteristic?
i want to enter cost ( in rupees and laks) against a counter
but for that counter charecteristic required and for taht charecteristic unit of measure Rs and Laks are not defined in the system.
So please help me ....

Hi,
Use T Code CUNI
Enter Unit of Measurement as RS and Text as Ruppes
Commercial and Technical Display is same as RS
Numerator is 1
Denominator 1
Exponent 0
Save
Thanks
Raj

How to Create a Separate N and G Network?

Similar Messages

Maybe you are looking for