How to create a Service Graph on the contract.
Hi. all
I have been trying to adapt ACI to service provider but it is difficult to fit it to SP environment.
Above all service graph hasn't been worked, even though i configured all based on a document regarding service graph.
** I can't understand why BD and VRF have to be splited to render service graph. Does it mean another BD and VRF should be added for service graph?
I heard that a contract dosen't support a redirect action.
So the traffic interested in a contract cann't be forward to a device cluster on a service graph.
If anyone succeed a service graph with multiple device clusters, let me know how to do it.
Thank you.
Yun.
Hi Everyone,
The networking requirements depend on how you want to deploy the services. In general you need to have a separate Bridge Domain (BD) for the provider and consumer EPGs. The only exception is when deploying an ADC in one-arm mode. In that case, both the provider and consumer EPGs must be in the same BD.
Support for multiple VRFs (i.e. contexts) is dependent on the capabilities of the service node (firewall, ADC, etc.) itself. Setting a device as multi-context in ACI doesn't make it multi-context; it has to be supported on the device itself.
I'm happy to put together a quick WebEx to walk through the different deployments and configuration for L4-7 services in ACI. You can send me your contact information to [email protected]
Regards,
Zach
Similar Messages
-
How to create a service partition like the original from lenovo
hey their, i have installed windows 7 on my x200. afore i have cleaned up all partiton incl. the service partition. now my question: how can i create a service partiton with the same behaviors like the original one (access the partition via the thinkvantage button and so on). i hope, someone can help me.
You need a set of recovery disks to re-create the partition.
If you haven't burned them when you first got the machine, they can be purchased directly from Lenovo or other online sources.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
How to create a service entry sheet based from the PO
how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran -
How to create Web services to communicate InfoPath forms to Share Point lists ?
How to create Web services to communicate InfoPath forms to Share Point lists ?
Hi,
As per your posting and my understanding, you wanted to communicate your infopath with SharePoint list/library. Please refer the below link(s) which may help you to solve your issue.
http://blogs.msdn.com/b/russmax/archive/2012/08/17/want-to-call-sharepoint-2010-web-services-within-browser-based-infopath-2010-forms.aspx
http://jaliyaudagedara.blogspot.in/2011/03/submitting-data-to-sharepoint-2010-list.html
or
http://blogs.msdn.com/b/infopath/archive/2007/03/26/submitting-to-a-sharepoint-list.aspx
If you need more help please let usknow
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you
see a reply being an answer to the question of the thread, click "Mark As Answer -
How to create web services in java?
Hi,
I am a newbie to java webservices. Can anybody tell me how to create web services in java?
Any tutorial link or step by step doc would be useful.
Appreciate your help in this regard.
Thanks in advance.
naymo01.Creating web services in Java appears to depend highly upon the server you intend to use.
Here's a tutorial: http://java.sun.com/webservices/docs/1.6/tutorial/doc/index.html -
How to create a pie graph in 10g or 9i forms using beans??
Hi..
Please can anyone show me how to use pie graphs in oracle 10g or 9i forms using bean?
i also want to know how to put data in pie graph.. as u know in column graph for example we have an x-axis and y-axis,and in pie there is no x-axis and y-axis.. so how i can put the same data in pie graph.. and also i may need more than one value for the x-axis or the y-axis to use in pie graph so how can i do it??
i use set_custom_property to call properties in beans.
I would so thankful for how can answer me.. please its urgent
Thanks.there are some other posts to this topic - How to create a pie graph in 10g or 9i forms using beans?? and so on.
use the search function of this forum. this may the fastest way for your urgent question -
How to create Web Service Proxy with help of WSDL.
Hi ,
How to create Web Service Proxy with help of WSDL .
Please help me .
Thanks in advacne for reply .check out this article. It has all the details
http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html -
How to create web service client
Hi All,
I am new to web services .Can any body explain how to create web service client ....
Please give the give the discription step wise.
Thanx
ArunHi Krishna,
Yes it is possible.
Check this Link
[JDeveloper Web Service|http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2]
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2
I strongly suggest you to go for Eclipse, instead of Netbeans or Jdeveloper incase of WebService. If you want to run your code in all the Server without making any changes go for Eclipse based development for Web Service.
Kindly let me know if you need some more inputs.
Regards,
Zack -
How to create Web Service as a source system in BI and configure a DS
Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AGHi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira. -
How to create a Service Contract ? (ABAP related devlopment)
Dear All,
How to create a Service Contract ? (ABAP related devlopment)
The Info I have is that
Service contract will contain:
u2022 Validity Start
u2022 Validity End
u2022 Duration u2013 minimum period for contracts
Additional Info:
1. Creation of service contract will take place automatically via u201Cfunction moduleu201D. This step will take place if all serial numbers are known in the sales order.
2. When ever a Sales Order is created in Seibel containing a line item of servie contract I need to create a service contract
I searched a BAPI -- BAPI_CONTRACT_CREATE
I searched a Tran -- VA41- create Contarct ( type - WV - Service and maint)
I am i in right direction ---> , If you have any good solution kindly answer
Please help.Hi Iqbal,
You can use
BAPI_CONTRACT_CREATE
BAPI_CONTRACTS_CREATEFROMDATA .
Once you create the contract, update the technical objects for the contracts
using two function modules called one after another.
IWOL_WV_ADD_OBJECTS
IWOL_WV_POST_OBJECT_LIST
Check this link:
http://abap.wikiprog.com/wiki/BAPI_CONTRACT_CREATE
Regards,
Chandra Sekhar -
How to create a service call for more then one item
Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one itemAs you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH -
How to Create Windows Service?
Dear Gurus,
We have created a service in windows 7 for our Application {PRINTSERVICE} as per below commands.
C:\Users\Administrator>sc create myservice1 binpath= "C:\VAFC Exes\Print Server\
Print server\printserver.exe" type= own type= interact error= ignore start= dema
nd
[SC] CreateService SUCCESS
WARNING: The service myservice1 is configured as interactive whose support is b
eing deprecated. The service may not function properly.
Please help in this regard, As we are thinking to run the PRINT SERVER as a windows service when the user is logged off.
Your urgent reply will be highly appreciated.
NOTE:-
Thanks
Adeel Imtiaz
Malik Adeel ImtiazHi Imtiaz,
Please have a look at this thread which is already discussed in our forum
http://social.technet.microsoft.com/Forums/windowsserver/en-US/28f1b9a6-d649-4b8a-946b-4f80fc2fd9ee/how-to-create-a-service-from-application-in-windows-server-2008-standard?forum=winservergen
More over your query related to windows 7 . So seek help from concerning forum https://social.technet.microsoft.com/Forums/windows/en-us/home?category=w7itpro
Regards, Ravikumar P -
How to create second service domain ?
Hi to all,
I have created primary control domain on T5240 server and also configured guest domain, i want to implement the virtual Disk failover concept. Hence can anyone tell me, How to create second service domain in detail...
Thanks in advance..
gmrajHello
Besides Marcel's docs I would suggest to read this to get more background about ldom best practices
white-paper-ldom
I think there are 2 threads for the same cuestion
How to create I/O Root domain?
Regards
Ezequiel. -
How to create a record based on the name of a file in the file-system?
Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
LeoLink to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS -
How to create multi garnishment order for the same garnishment document
Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.
Maybe you are looking for
-
Hi, I have followed all the steps in the "Customizing the LiveCycle Workspace ES User Interface" document and am stuck on page 22, point #8 for those of you that might have the document to hand. I have created my custom ear file but cannot find the c
-
I have an iTouch. I do not remember exactly what happened, but I now have a folder labeled "Books" that contains my Kindle app. Previously, I simply had the Kindle app on the home screen. How do I remove the Books folder and return to the previous se
-
Integration between SD and QM - urgent
Can someone post the integration points between SD and QM. It's urgent Thanks in advance
-
Trouble saving pdf - adobe reader X
Does anyone else have trouble saving some PDF files? I'm looking at academic papers and certain databases have PDF files that will let me open and print them, but I can't save them to my computer. Please help!
-
Linking Notes and Contacts to Calendar entries
One of the features I loved on the Palm OS was the ability to make a Calendar entry, then link contacts, notes, and documents to the calendar entry. This functionality comes in very handy for scheduling a business meeting, then linking the contact fi