How to create a service partition like the original from lenovo

hey their, i have installed windows 7 on my x200. afore i have cleaned up all partiton incl. the service partition. now my question: how can i create a service partiton with the same behaviors like the original one (access the partition via the thinkvantage button and so on). i hope, someone can help me.

You need a set of recovery disks to re-create the partition.
If you haven't burned them when you first got the machine, they can be purchased directly from Lenovo or other online sources.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

How to create a second partition on the harddisk?

Hello To All Members!
I recently got some viruses on my laptop. So I had to use my recovery cd to recover my system.
Now the problem is that I asked me for the partition where are the files which are being extracted. I marked it to 30GB.
So, windows is working fine but my Rest of 50GB will not be shown.
I thought that the recovery cd will make a new second partition as well, but it did not. Now how to make some other partitions?
Second question related to first one is how much time i can use this recovery disk. I mean will the windows remain genuine?????
For the partition problem i dont know of some possible solutions cause i needed three partitions, 1st of 30GB(Windows Default) and other two of 25GB.
The Best Solution coming in my mind is to make any windows ME or 98 bootable cd and run fdisk to create the remaining partitions.
But it is makes some new questions in my mind. Do i have to use a recovery cd again? If yes than I will not use this process again cause it will ask for partition to extract files of windows and i will choose 30GB again.
And again it will remove additional partitions.
Please help me and clear the questions coming in my mind..
[Edited by: admin on 31-Mar-2007 08:32]

Hi there,
do know for the UlltimateBootCD4Win? This from CD bootable WinXP-BartPEedition with additional tools gives you the ability to make such things like partitioning, backup or formatting your HDD.
It has many more applications which help you to maintain your system without booting your original OS.
So I think that this CD will solve your partitioning issues.
Heres a link: www.ubcd4win.com/
Just try it and tell me your opinion.
Nice weekend and greetings from the sunny south ;)

Need to open .fcp project from FCP7 in FCPX 10.0.3. How can I achieve this without exporting the original from FCP7 to a QT movie? I need the original timeline in FCPX.

I have been working on a scholarship short film for a couple of months now (am a senior in high school) and have been using my school's Mac Pros with OSX 10.7 and FCP7 to edit it. Yesterday I bought a Macbook Pro and got FCPX, and am having trouble moving everything over (the computers at school are going to be wiped for the end of the year soon and I must continue to edit it on my MacBook). The project file "MattsShort.fcp" from FCP7 at school isn't even being recognized as a project file by the newest version of FCPX, so obviously I cannot open it and get to work connecting the media. How can I open this file in FCPX? Excluding exporting the project at school to a quicktime movie, I need to be able to further edit the timeline.

Cool, thanks! I was able to import the timeline into FCPX but all of the files are offline, even though I imported the same exact clips that were in the original FCP7 project, into the same 'event' that I have the new FCPX timeline in. I believe the problem lies in that FCPX imported the clips and named them after the date and time they were created, rather than the "Clip #XXX" that FCP7 assigned to the timeline. Does this sound correct? And if so, is the only way to solve this problem to go back to FCP7 and rename all of the clips assigned to the timeline to the names FCPX gave them? I really hope there is a simpler solution but given all of the work it takes to even import a FCP7 project into FCPX, I wouldn't be surprised if that was the only solution.
A little more info: When I use 7toX to convert the XML file, it says that my media will be offline.
EDIT: I just watched a youtube video that explained that 7toX brings over the required media.....why isn't it doing that for me? I am on two different computers if I hadn't already said.
Message was edited by: MattMadoni

How to create a repeating region like the attachements in Gmail

I don't even know how to begin Googling or searching here for
this topic. But I've got a form and I want to have two fields show
up for inputting the fabric type and then the pattern name. This
site will allow them to request fabric swatches to see in person
how they look and make a decision for their furniture. And if
customers want to ask for more than one sample, I want to be able
to have a link that says, "Request another" and when clicked, it
creates another instance of those two fields automagically, just
how the attachments in Gmail work.
Is this something possible with Spry? I'd like to think it
is, but it might need some jury rigging to ensure that the ids for
those text inputs are all unique and such. But like I said, I don't
even know how to begin searching for this topic since "repeating
area" or "repeating region" brings back 1000s of unrelating
results.
Anyone have any experience doing something like this and
could shed some light on it and/or point me toward some resources
that could help out?
Thanks!

Hi unnamed,
Suppose you have an id that identifies your record.
Go to Report definiton, tab report attirbutes.
Select the id of your record.
Create a link to the page you want to go to.
Hope this helps.
If not, I suggest you to create a from with report, and analyze the way the wizard has generated it.
Leo

How to create a Service Graph on the contract.

Hi. all
I have been trying to adapt ACI to service provider but it is difficult to fit it to SP environment.
Above all service graph hasn't been worked, even though i configured all based on a document regarding service graph.
** I can't understand why BD and VRF have to be splited to render service graph. Does it mean another BD and VRF should be added for service graph?
I heard that a contract dosen't support a redirect action.
So the traffic interested in a contract cann't be forward to a device cluster on a service graph.
If anyone succeed a service graph with multiple device clusters, let me know how to do it.
Thank you.
Yun.

Hi Everyone,
The networking requirements depend on how you want to deploy the services. In general you need to have a separate Bridge Domain (BD) for the provider and consumer EPGs. The only exception is when deploying an ADC in one-arm mode. In that case, both the provider and consumer EPGs must be in the same BD.
Support for multiple VRFs (i.e. contexts) is dependent on the capabilities of the service node (firewall, ADC, etc.) itself. Setting a device as multi-context in ACI doesn't make it multi-context; it has to be supported on the device itself.
I'm happy to put together a quick WebEx to walk through the different deployments and configuration for L4-7 services in ACI. You can send me your contact information to [email protected]
Regards,
Zach

How to create a FAT32 partition on the internal HDD?

I'd like to set up a partition that can be shared between OSX and Windows.
I tried using a GParted LiveCD, but then OSX won't recognize the partition. I haven't installed Windows yet, but I've read that formatting the partition from Windows will prevent OSX from recognizing it as well. Any ideas? Thanks.

If you are reformatting your internal drive, you will loose your OS X install and have to re-install. That being said, boot from your os x install disc and reformat the first partition as _free space_ for your Windows install then install OS X on the second partition formatted as HFS+. After the install and boot of the OS X install, restart with your Windows disc and install on free space. It will format the partition for you as NTFS or Fat32 if you choose. Mac's can read and write to both. Fat32 is native and NTFS requires MacFuse and the ntfs-3g plugin...both free.
After the install you will need to set up a boot option. I have used Super Grub Disc
http://www.supergrubdisk.org/
and booted the partitions seperatly. There are other BootLoader programs that will allow you to choose which partition to boot from. A really nice one with a great GUI is Cameleon
http://chameleon.osx86.hu/articles/chameleon-20rc1-is-out
Hope this works for you,
Glynn

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details.

How to create a service entry sheet based from the PO

how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!

HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran

How to put a recovery partition on the hard drive

How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
Thank You
Garry Crist

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to create a new partition

i just got a new thinkpa. i would like to know how to create a new partition.
i tried partition magic 8.0 and it gave me BSoDs. please let me know. thanks.
thinkpad t400 t9400
2gb ram
windows sp3
160gb 7200 rpm

folivio wrote:
I'm not an expert, but I partitioned the C: drive and made a partition for Windows 8. It worked perfectly as a multi-boot setup.
A word of caution...Make sure that you want to make it a permanent change. When I removed the Win 8 partition and tried to restore my system to factory settings, I could not get the F2 during restart to work. F2 now brings up the multi-boot screen. So I tried to restore using the DVD Restore Set I made before I did anything to the partitions. I was able to boot to the DVD Restore Set by using the F12 key during restart and selecting the BDDVD drive. It looked like it was going to work, but after it loaded the minmum Windows files and I clicked on Restore, I got an error stating that the partition had changed and I could not restore.
I contacted tech support and they are sending me a disc to restore the system.
Regards
Thanks for the heads up. I'd like to use the SSD for installing Windows 8. It seems to have about 25GB free. Isn't that a better place to install the OS? I am not sure why the bigger drive is marked as C: and the small, faster one as D: :-(

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

ITS 620 - how to create a service file for SAPGUI for HTML option

Hi,
We have the following configuration :
ITS 620 installed
IIS webserver
NTLM Authentication on webserver
SAP 46C
We have some reports that use the IACs option of creating ITS reports and we are able to create the service files using webstudio where we can save a service id and password so that when the ITS page is called, it logs on the user directly into the system.
Now, we are trying to create a new ITS page for a custom Z transaction and would like to use the SAPGUI for HTML option so that we do not have to use Webstudio to create and modify the HTML pages.
When I call the ITS page for the new transaction, it brings up the logon screen for the user, which we want to avoid. If I create a new service file for this Z transaction without any HTML pages then I get an error.
Is there a way to copy the WEBGUI.SRVC file to a custome SRVC file, I tried to create to copy it to a test file called ZTEST.SRVC for my test transaction called ZTEST and now I get an error.
thanks in advance
N.S.

Hello N.S.
You can create a service file, like ZSERVICE.SRVC. The parameters should be:
~webgui 1
~transaction ztransaction
~client 001
~login username
~password password
~language EN
The "~webgui 1" allows the ITS to use the Webgui to dynamically generate the page (no IAC needed.)
The "~transaction" is the transaction code of your service.
The "~client" is the client number.
The "~login" is the username.
The "~password" is the user's password.
the "~language" is the language for the users.
Note that the last four are required for automatic logon. If end users use a variety of languages though the ~language can be prepended to the URL to support different languages. (Leave it blank in the srvc file then.)
Edgar

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

How to create a service partition like the original from lenovo

Similar Messages

Maybe you are looking for