How to create a simple text color script?

Hi, I need a script for school that will type all consonants in black and vowels in red using Office Word. I'm sure there is an easy way to do this but I know little about scripting. Does anyone know a script that will do this. Your help is much appreciated.

From your response to Camelot it would seem you have the issue pretty much solved. But you should realize:
• You are only going to be able to write/run AppleScripts on a MAC computer
• While there are Microsoft Word programs for MAC, there's no TextEdit on pc's as far as I know. But you might try e-mailing your TextEdit result (as an attachment) to a pc. It will probably open as a Word Document and, who knows, it might even have the red text you created on your MAC. Don't know if that would make your effort any easier.
• If you have MS Word on your MAC, I'm reasonably certain Camelot's code can be adapted to that, but it's not simply a matter of substituting "MS Word" for "TextEdit". If the e-mail trick works, I don't know how rewriting the script for Word would further simplify things.
I see that Hiroto has supplied possible code for working directly in Word. Message was edited by: Noaks

Similar Messages

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to create a simple idoc in practice? can you provide an example?

how to create a simple idoc in practice? can you provide an example with full source code?

Try with the follwoing steps
Sending System(Outbound ALE Process)
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Create Model View
Tcode BD82 ¡V Generate partner Profiles & Create Ports
Tcode BD64 ¡V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ¡V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 ¡V Send Material Data
Tcode WE05 ¡V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Thanks & regards
Sreenivas
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Take a look at this guide.
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Create The Extension Segment
Transaction: WE31
The first step in extending an IDoc is to create the new segments that will go into that IDoc. There are some rules that you need to follow when creating the segments:
- The name of each segment type must start with Z1
- For each field in the segment you need to define a field name and a
data element.
- The data element for the segment structure must be of data type CHAR.
How to create new segments:
Run the segment maintenance transaction WE31.
Type your new segment name, and click on Create.
Define the fields of your segment:
Field name
Data Element for the field (from the ABAP dictionary).
Do not change the Export length!
Save the segment
Run Segment -->Check to check the segment for consistency.
Release the segment for transport. Select Edit -->Set Release. Note that the Release column now has a check mark.
Create the Extension IDoc Type
Transaction: WE30
After you create the segments to be added to the extension type, you can create the extension type itself. Execute transaction WE30, enter the extension name, select Extension type, and click Create. You now have three options:
Create new type: Does not refer to other extension types
Create copy: Copies info from an extension type that already exists
Create successor: Extends an extension type from a previous release
of R/3. You can only have one version of an extension type for
each release.
Enter the Basic IDoc type that this extension type will extend.
The screen now shows the structure of the IDoc type you used as
a reference.
Position the cursor on one of the segments and click Create. This will insert an extension segment as a child of the selected segment.
NOTE: A segment cannot appear more than once in an IDoc type! You must control the use of duplicate segments with the segment attributes (the next screen).
The segment attribute screen appears. Enter the information and save.
Extension segments should not be mandatory (for future upgrades), and will need to have minimum and maximum number of instances defined. This answers the question, for each instance of the parent segment, how many instances of the child segment may we have?
You can press the Segment Editor pushbutton to view or change the segment definition.
Create the new Message Type
You can only use an extension IDoc type by assigning it to a message type. You can create a new message type for this.
First the message type itself needs to be created.
Transaction: WE81
Create a new entry and save. Use SAP established customer naming conventions (good form is to start with a Z and retain the rest of the related SAP message type, so, for example, MATMAS becomes ZMATMAS).
After creating the message type, associate it with the corresponding Basic IDoc Type and Extension Type. This relationship is used when IDocs are sent to or received from a partner to determine what segments are valid and what the hierarchy for those segments is.
Transaction: WE82
Create a new entry and enter the Message type, Basic IDoc type, Extension type, and Release, and save your data. Note: the release assignment is not valid for prior SAP releases.
One message type can be associated with many basic IDoc types; however, you need a one-to-one relationship for distribution via ALE.
regards,
srinivas
*reward for useful answers*</b>

How to Create all Pages text in Outline

Adobe Indesign CS5 : How to Create all Pages text in Outline
or how to Create Scripts for Create Outline Text
One step Solution
plz Freinds....
thnx
[email rmoved by forum host]

Oh and sorry I don't know of a script.
My last post was just a "warning" to whomever else may stumble on this thread. It was more for posterity, if it helps you then great. If it helps others then great.
There are certain circumstances and unusual times where you'd need to do this. And I don't know of a way to automate it.
You can get 3rd Party Acrobat PDF plugins that will do it (my mind has gone blank on their names?)
Here's a nice tut with a transparency script also added http://www.stevewareham.com/text2outlines.php
BUT if you want to do this in Acrobat Pro
Add a Watermark under Document>Watermark>Add
Make sure the text covers all the space in the PDF where text could lie
Or you could use an image - say a full page black JPG or something
Set the Opacity to 0
the watermark will be added to all pages
Then Advanced>Flattener Preview
make sure Convert text to outlines is selected
Select the option for All Pages in Document
Click Appy
Flatten the PDF and all the text should convert under the flattening

How do i change the text color in ichat?

How do i change the text color in ichat?

Hi,
In One Chat by word or letter go to the Format Menu as you type (Highlight and change like you would in any other App)
On a more permanent basis the Font, it's colour and the IM background colour are set in iChat Menu > Preferences > Messages
10:12 PM Wednesday; November 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do I change the text color from blue in Safari on Macbook Pro?

I have trouble seeing the light blue text color -- many article use this. How can I change the text color?

Is this a particular website where you see the light blue color?
If so, please post a link to that site in your Reply.
Exactly which light blue color are you referrting to ??

How do I change the text color in a call out box?

How do I change the text color in a call out box?

See http://help.adobe.com/en_US/acrobat/X/standard/using/WS58a04a822e3e50102bd615109794195ff-7 e5a.w.html
Also http://helpx.adobe.com/acrobat/kb/unable-edit-properties-text-box.html

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create a OTR Text in Web Dynpro ?

Hi All,
Please help, How to create a OTR Text in Web Dynpro ?
Urgent.
Thanks in advance.
Kaleem.

Hi Kaleemullah,
To create OTR Text, T-Code is SOTR_EDIT. If you run this transaction then one screen will appear. There you can choose Long Text or Short Text based on your
Text. You can choose language also. In Text field you can enter your text. You can put WDYV in your Object Type field. In Text block Length can be increased to 25 as it may be problem if language conversion of Text happens. You must fill your package field and save the OTR.
I hope you can be able to create OTR Text now.
Best Regards,
bansidhar

How do you change the text color in your junk mail folder

How do you change the text color in your junk mail folder?

Try Mail Preferences/Junk tab and under " When Junk Mail Arrives" click Performe Custom Action then advanced
you will see the option for colors.
Hope this helps

How do you change the text color in io7 from white to black?

How do you change the text color on the home page in iO7 from white to black? I tried to invert the color but that reverses everything inclufing pictures.

Yes, you can. If you change your wallpaper to a very light or white color the text turns black.

How to create a LONG TEXT object in BAPI_ALM_NOTIF_CREATE

Dear experts,
Would you please give me a hand how to create a LONG TEXT object when creating a new Notification using BAPI_ALM_NOTIF_CREATE.
The snapit of my code is below. The Notification is created but without a long text.
THANK YOU!!
Data:
    lv_it_longText type STANDARD TABLE OF BAPI2080_NOTFULLTXTI,
      lv_st_longText like LINE OF lv_it_longText,
lv_st_longText-OBJTYPE = 'QME'.
lv_st_longText-TEXT_LINE = DESCRIPTIONLONG.
CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
EXPORTING
EXTERNAL_NUMBER          =
   notif_type               = 'M1'
    notifheader              = lv_header
TASK_DETERMINATION       = ' '
SENDER                   =
ORDERID                  =
IMPORTING
   NOTIFHEADER_EXPORT       = lv_header_import
TABLES
*NOTITEM                  =   lv_it_item
NOTIFCAUS                =
NOTIFACTV                =
NOTIFTASK                =
NOTIFPARTNR              =
   LONGTEXTS                = lv_it_longText
KEY_RELATIONSHIPS        =
   RETURN                   = lv_it_return.

Hi
Make sure you have filled OBKEY.
OBJKEY must have the corresponding sort field for the values named below :-
1. QMEL - Notification header
2. QMFE - Notification item
3. QMUR - Notification cause
4. QMSM - Notification task
5. QMMA - Notification action
The combination of sort field of item/cause, item/task and item/action must be unique within a notification. If you leave the sort field empty and the OBJTYP = QME, then a long text is created for the notification header.
Regards
Abhii

How to create Using Formatted Text Field with multiple Sliders?

Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
// constructor
label1 = new JLabel( "Individuals" );
scroller1 = new JSlider( SwingConstants.HORIZONTAL,     0, 100, 10 );
scroller1.setMajorTickSpacing( 10 );
scroller1.setMinorTickSpacing( 1 );
scroller1.setPaintTicks( true );
scroller1.setPaintLabels( true );
scroller1.addChangeListener(this);
java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
NumberFormatter formatter = new NumberFormatter(numberFormat);
        formatter.setMinimum(new Integer(0));
        formatter.setMaximum(new Integer(100));
textField1 = new JFormattedTextField(formatter);
textField1.setValue(new Integer(10)); //FPS_INIT
textField1.setColumns(1); //get some space
textField1.addPropertyChangeListener(this);
//React when the user presses Enter.
textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
        textField1.getActionMap().put("check", new AbstractAction() {
            public void actionPerformed(ActionEvent e) {
                if (!textField1.isEditValid()) { //The text is invalid.
                    Toolkit.getDefaultToolkit().beep();
                    textField1.selectAll();
                } else try {                    //The text is valid,
                    textField1.commitEdit();     //so use it.
                } catch (java.text.ParseException exc) { }
label2 = new JLabel( "Precision" );
scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
scroller2.setMajorTickSpacing( 10 );
scroller2.setMinorTickSpacing( 1 );
scroller2.setPaintTicks( true );
scroller2.setPaintLabels( true );
scroller2.addChangeListener(this);
textField2 = new JFormattedTextField(formatter);
textField2.setValue(new Integer(10)); //FPS_INIT
textField2.setColumns(1); //get some space
textField2.addPropertyChangeListener(this);
//React when the user presses Enter.
textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
        textField2.getActionMap().put("check", new AbstractAction() {
            public void actionPerformed(ActionEvent e) {
                if (!textField2.isEditValid()) { //The text is invalid.
                    Toolkit.getDefaultToolkit().beep();
                    textField2.selectAll();
                } else try {                    //The text is valid,
                    textField2.commitEdit();     //so use it.
                } catch (java.text.ParseException exc) { }
// State Changed
     public void stateChanged(ChangeEvent e) {
         JSlider source = (JSlider)e.getSource();
         int fps = (int)source.getValue();
         if (!source.getValueIsAdjusting()) { //done adjusting
              if(source==scroller1)   {
                   System.out.println("source ==scoller1\n");
                   textField1.setValue(new Integer(fps)); //update ftf value
              else if(source==scroller2)     {
                   System.out.println("source ==scoller2\n");
                   textField2.setValue(new Integer(fps)); //update ftf value
         } else { //value is adjusting; just set the text
             if(source==scroller1)     textField1.setText(String.valueOf(fps));
             else if(source==scroller2)     textField2.setText(String.valueOf(fps));
// Property Change
    public void propertyChange(PropertyChangeEvent e) {
        if ("value".equals(e.getPropertyName())) {
            Number value = (Number)e.getNewValue();
            if (scroller1 != null && value != null) {
                scroller1.setValue(value.intValue());
             else if (scroller2 != null && value != null) {
                scroller2.setValue(value.intValue());
    // ACTION PERFORMED
    public void actionPerformed(ActionEvent event) {
    if (!textField1.isEditValid()) { //The text is invalid.
        Toolkit.getDefaultToolkit().beep();
        textField1.selectAll();
    } else try {                    //The text is valid,
        textField1.commitEdit();     //so use it.
    } catch (java.text.ParseException exc) { }
         if (!textField2.isEditValid()) { //The text is invalid.
        Toolkit.getDefaultToolkit().beep();
        textField2.selectAll();
    } else try {                    //The text is valid,
        textField2.commitEdit();     //so use it.
    } catch (java.text.ParseException exc) { }
...

if :p3_note_id is null
then
insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
Another option is that you have a trigger on table NOTES that generates a new note_id even for an update.

How can I change the text color in pages

Hi , how can I change the text color in pages app

Select the text you want to change.
Tap the i in the top bar.
Tap Style in the top bar.
Tap the Font name/size
Tap Color then choose the color you want the text.

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

How to create a simple text color script?

Similar Messages

Maybe you are looking for